Thermal Expansion Behavior of the Si3N4-Whisker-Reinforced Soda-Borosilicate Glass Matrix Composite

Thermal expansion behaviors of a Si₃N₄-whisker-reinforced sodaborosilicate glass matrix composite are studied. An abrupt increase of the coefficient of thermal expansion is observed and is attributed to formation of crystobalite in the sodaborosilicate glass matrix. This thermal expansion behavior is discussed with special reference to the phase transformation of the crystobalite.     

Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films

Bis(triethoxysilyl)-substituted oligothiophene with a moderate π-conjugation length was newly synthesized and polymerized to give a polysilsesquioxane network having oligothiophene units dispersed homogeneously without phase separation. The polymer was fixed on glass or ITO substrate by spin-coating and annealing. The resulting film exhibited a high mechanical strength due to the covalent bonding with the substrates, and was electrochemically stable even after 300 redox cycles in electrolyte solution. Chemical oxidation of the polymer films yielded electrically conductive and almost transparent films.     

Size Controlled Synthesis of Gold Nanoparticles by Porphyrin with Four Sulfur Atoms

Tetradentate thioacetyl porphyrin ligand (1) was synthesized to protect gold nanoparticles. 1-protected gold nanoparticles were characterized by UV-vis spectroscopy and XPS. Analysis by XPS showed that all of four thioacetyl groups of 1 were dissociated and bound to the surface of gold nanoparticles in thiolate form. The size of 1-protected gold nanoparticles (GN:1) was controlled by thioacetyl group/HAuCl₄ molar ratio and approached to 2 nm. Compared with a protecting ligand without porphyrin plane (2) or dodecanethiol, 1 can control the size of gold nanoparticles efficiently probably due to the tetradentate ligation effect.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

Morphological reason for enhancement of electrochemical double layer capacitances of various acetylene blacks by electrochemical polarization

Enhancement of electrochemical capacitance and morphological variations of various acetylene blacks caused by electrochemical polarization are presented. Acetylene blacks of different mean particle diameters were modified by air-oxidation and heat treatment to diversify the morphologies of the acetylene blacks before electrochemical polarization. The various acetylene blacks were electrochemically oxidized at 1.6 V (vs. Ag/AgCl) for 10 s and the polarization step was repeated until the capacitance values did not change any longer. These polarization steps enhanced the capacitances of the acetylene blacks and the specific enhancement factors range from 2 to 5.5. Such an enhancement is strongly related to morphological modification as revealed by transmission electron microscopic observations. The electrochemical polarization resulted in formation of tiny graphene sheets on the wide graphitic carbon surfaces, which were most responsible for the observed capacitive enhancement. Although the pseudo-capacitance increased after polarization by forming oxygenated species on the surfaces, its contribution to the total capacitance was less than 10%. The mechanism of the formation of the tiny graphene sheets during the electrochemical oxidation is described schematically.     

Preparation and Characterization of Highly Fluorescent, Glutathione-coated Near Infrared Quantum Dots for in Vivo Fluorescence Imaging

Fluorescent probes that emit in the near-infrared (NIR, 700–1,300 nm) region are suitable as optical contrast agents for in vivo fluorescence imaging because of low scattering and absorption of the NIR light in tissues. Recently, NIR quantum dots (QDs) have become a new class of fluorescent materials that can be used for in vivo imaging. Compared with traditional organic fluorescent dyes, QDs have several unique advantages such as size- and composition-tunable emission, high brightness, narrow emission bands, large Stokes shifts, and high resistance to photobleaching. In this paper, we report a facile method for the preparation of highly fluorescent, water-soluble glutathione (GSH)-coated NIR QDs for in vivo imaging. GSH-coated NIR QDs (GSH-QDs) were prepared by surface modification of hydrophobic CdSeTe/CdS (core/shell) QDs. The hydrophobic surface of the CdSeTe/CdS QDs was exchanged with GSH in tetrahydrofuran-water. The resulting GSH-QDs were monodisperse particles and stable in PBS (phosphate buffered saline, pH = 7.4). The GSH-QDs (800 nm emission) were highly fluorescent in aqueous solutions (quantum yield = 22% in PBS buffer), and their hydrodynamic diameter was less than 10 nm, which is comparable to the size of proteins. The cellular uptake and viability for the GSH-QDs were examined using HeLa and HEK 293 cells. When the cells were incubated with aqueous solutions of the GSH-QDs (10 nM), the QDs were taken into the cells and distributed in the perinuclear region of both cells. After 12 hrs incubation of 4 nM of GSH-QDs, the viabilities of HeLa and HEK 293 cells were ca. 80 and 50%, respectively. As a biomedical utility of the GSH-QDs, in vivo NIR-fluorescence imaging of a lymph node in a mouse is presented.     

Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers

The tensile properties and fracture behavior of ultrahigh tensile strength PAN-based (T1000GB), ultrahigh modulus pitch-based (K13D) and high ductility pitch-based (XN-05) carbon fibers have been investigated. The statistical distributions of the tensile strength were characterized. The Weibull modulus for the T1000GB, K13D and XN-05 fibers were calculated to be 5.9, 4.2 and 7.9, respectively. The results clearly show that for PAN- and pitch-based carbon fibers, the Weibull modulus decreases with an increase in the tensile modulus and the mean tensile strength.     

A corrosion prediction method for weathering steels

Japanese Specification for Highway Bridges [Japan Road Association: Specification for Highway Bridges—I & II, 2002.3] has been revised in 2002, which clearly states that degradation of bridge members, including those of weathering steels, to occur in prolonged period of time must be taken into account at the design stage to realize long term structural durability. To cope with the revised paradigm, SABI chemistry committee in Japan Society of Corrosion Engineers has proposed durable state concept [SABI Chemistry Committee of Japan Society of Corrosion Engineers, in: Proc. 132nd Symposium for Corrosion and Protection, 2001.6.25, p. 3], which is defined as a condition in which corrosion rate of steel is slow enough not to form thick rust [H. Kihira, K. Shiotani, H. Miyuki, T. Nakayama, M. Takemura, Y. Watanabe, Doboku Gakkai Ronbun-shu (J. Japan Soc. Civil Engineers) No. 745/I-65, 2003.10, pp.77-87]. Since corrosiveness of atmosphere differs by location, a corrosion prediction method for both conventional and advanced weathering steels [H. Kihira, A. Usami, K. Tanabe, M. Ito, G. Shigesato, Y. Tomita, T. Kusunoki, T. Tsuzuki, S. Ito, T. Murata, in: Electrochemical Society Proceedings, vol. 99-26, 2000, pp. 127-136] is needed to ensure structural durability for future. Thus, versatile computational scheme for it has been derived through mathematical modeling based upon the durable state concept.