Simplified stable crack growth analyses of welded CT specimens—comparison study of GE/EPRI, reference stress and R6 methods

This paper describes some simplified stable crack growth analyses of two kinds of inhomogeneous CT specimens. The one is machined from a submerged are welded plate of a nuclear pressure vessel A533B Class 1 steel, while the other is machined from an electron-beam welded plate of the A533B Class 1 steel and a high strength HT80 steel. In both specimens, initial cracks are placed to be normal to the fusion line. The ratio of yield stresses of the weld metal and the base metal of the A533B Class 1 steel is about 1·15, while that of the HT80 and the A533B Class 1 steels is about 1·4.

The generation phase crack growth analyses using the GE/EPRI and the reference stress methods are performed, calculating an applied load (P) and the J-value, while the application phase analyses of analyses using the R6 method are performed to calculate the maximum value of the applied load (P_max). Finally, some modification procedures of the three simplified estimation schemes are discussed in order to apply them to inhomogeneous material regimes.     

A multiport page-memory architecture and a multiport disk-cache system

Everlasting demands for solutions to ever growing computation problems and demands for efficient means to manage and utilize sophisticated information have caused an increase in the amount of data necessary to handle a job, while drastic reduction in CPU prices is encouraging massive parallel architectures for gigantic data processing. These trends are increasing the importance of a large shared buffer memory with 10³～10⁴ simultaneously accessible ports. This paper proposes a multiport page buffer architecture that allows 10³～10⁴ concurrent accesses and causes no access conflict nor suspension. It consists of a set of memory banks and multistaged switching networks with controllers that control each row of the networks. Consecutive words in each page are stored orthogonally across banks. Memory interleaving may be applied to improve access rate in consecutive retrievals. When used as a disk cache memory, it decreases the number of disk accesses and increases both the page transfer rate and the maximum number of concurrent page accesses.     

Selective detection of a catecholamine against electroactive interferents using an interdigitated heteroarray electrode consisting of a metal oxide electrode and a metal band electrode

We developed an interdigitated array electrode (IDAE) consisting of a metal oxide electrode and a metal band heteroelectrode and employed it for the selective detection of catecholamines. We used an indium-tin oxide (ITO) film as the oxidation electrode of the IDAE because the ITO was able to suppress response currents from L-ascorbic acid (AA) and uric acid (UA), which are major electroactive interferents in biological fluids. However, the ITO film also suppresses the reduction of quinones including oxidized catecholamines. We developed a simple technique for fabricating our hetero IDAE, which also preserves the electrochemical properties of the ITO. When we compared hetero ITO-gold, homo ITO-ITO, and carbon-carbon IDAEs, we found that the hetero IDAE provided both high sensitivity and selectivity for DA detection. We achieved high selectivities for DA against AA and UA. The ratios of the response currents of AA and UA to DA were calculated as 6 and 5%, respectively.     

Analysis of air pollution and prevalence rate of allergic diseases among elementary school children in Kawaguchi and Hatogaya city

Kawaguchi and Hatogaya City are located on the northern edge of Tokyo. We analysed between air pollution and prevalence rate of allergic diseases among elementary school children in this area. A prevalence rate of allergic diseases in 1996 May and June was as follows; bronchial asthma 13.5%, atopic dermatitis 24.5%, allergic rhinitis and/or conjunctivitis 22.8%, urticaria 12.4%, food allergy 7.8% and drug allergy 2.2%, respectively. Air pollution of this area was analysed to check the levels of nitrogen dioxide (NO2), sulfur dioxide (SO2) and suspended particulate matters (SPM). NO2 pollution was relatively high in urban area, and SPM pollution was especially high around the highways. SO2 pollution was lower than the environmental standard. No relationship was found between the prevalence rate of bronchial asthma, atopic dermatitis, allergic rhinitis and/or conjunctivitis and air pollution, but it was found that these diseases are slightly related to population density (p < 0.1, p < 0.01, p < 0.1, respectively).     

A DYNAMIC POPULATION MODEL INCORPORATING A VARIETY OF URBAN FUNCTIONS

"This paper aims to investigate the theoretical background of Allen and Sanglier's model, slightly modifying it. We construct a dynamic two-city population model in which there are different types of urban functions in the cities. Population dynamics of both cities are expressed in terms of a system of differential equations of the logistic type, taking account of spatial interaction between them. For this model, both the existence condition and the globally asymptotic stability of the equilibrium state are theoretically explored. Then configurations of equilibrium population distribution that correspond to different combinations of the numbers of types of urban functions in two cities are also examined. Finally, some numerical simulations are done in order to supplement the theoretical considerations."     

High-Density Frenkel Defects as Origin of N-Type Thermoelectric Performance and Low Thermal Conductivity in Mg3Sb2-Based Materials

Mg₃Sb₂-based intermetallic compounds with exceptionally high thermoelectric performance exhibit unconventional n-type dopability and anomalously low thermal conductivity, attracting much attention to the underlying mechanisms. To date, investigations have been limited to first-principle calculations and thermodynamic analysis of defect formation, and detailed experimental analysis on crystal structure and phonon modes has not been achieved. Here, a synchrotron X-ray diffraction study clarifies that, against a previous view of a simple crystal structure with a small unit cell, Mg₃Sb₂ is inherently a heavily disordered material with Frenkel defects, charge-neutral defect complexes of cation vacancies and interstitials. Ionic charge neutrality preserved in Mg₃Sb₂ is responsible for exotic n-type dopability, which is unachievable for other Zintl phase materials. The thermal conductivity of Mg₃Sb₂ exhibits deviation from the standard T⁻¹ temperature dependency with strongly limited phonon transport due to a strain field. Inelastic X-ray scattering measurement reveals enhanced phonon scattering induced by disorder. The results will draw renewed attention to crystal defects and disorder as means to explore new high-performance thermoelectric materials.     

Label-free protein biosensor based on aptamer-modified carbon nanotube field-effect transistors

We have fabricated label-free protein biosensors based on aptamer-modified carbon nanotube field-effect transistors (CNT-FETs) for the detection of immunoglobulin E (IgE). After the covalent immobilization of 5'-amino-modified 45-mer aptamers on the CNT channels, the electrical properties of the CNT-FETs were monitored in real time. The introduction of target IgE at various concentrations caused a sharp decrease in the source-drain current, and a gradual saturation was observed at lower concentrations. The amount of the net source-drain current before and after IgE introduction on the aptamer-modified CNT-FETs increased as a function of IgE concentration. The detection limit for IgE was determined as 250 pM. We have also prepared CNT-FET biosensors using a monoclonal antibody against IgE (IgE-mAb). The electrical properties of the aptamer- and antibody-modified CNT-FETs were compared. The performance of aptamer-modified CNT-FETs provided better results than the ones obtained using IgE-mAb-modified CNT-FETs under similar conditions. Thus, we suggest that the aptamer-modified CNT-FETs are promising candidates for the development of label-free protein biosensors.     

FLO11 is essential for pellicle formation by wild pellicle-forming yeasts isolated from contaminated wines

The Δflo11/Δflo11 disruptant strains constructed from three wild yeast strains, which were independently isolated from pellicles formed on the surface of contaminated stored wines, completely lost their ability to form pellicles. The FLO11 expression level of the pellicle-forming strains was much higher than that of non-pellicle-forming wine strains. Cell surface hydrophobicity of the Δflo11/Δflo11 disruptant strains was as high as that of the parental pellicle-forming strains. These findings indicate that FLO11 is essential for unfavorable pellicle formation of wild pellicle-forming yeasts by mechanisms other than increasing cell surface hydrophobicity.     

Hetero-stereocomplex formation of stereoblock copolymer of substituted and non-substituted poly(lactide)s

The crystallization behavior of the stereoblock copolymer of substituted and non-substituted poly(lactide)s, i.e., poly(d-2-hydroxybutyrate) and poly(l-lactide) chains having the opposite configurations [P(D-2HB)-b-PLLA] and the reference block copolymer of poly(d-2-hydroxybutyrate) and poly(d-lactide) chains with the identical configurations [P(D-2HB)-b-PDLA] was investigated. At the crystallizable temperature range of 60-160 °C, the crystallized P(D-2HB)-b-PLLA contained solely the hetero-stereocomplex crystallites as a crystalline species, without formation of poly(d-2-hydroxybutyrate) or poly(l-lactide) homo-crystallites, in contrast with their polymer blends. On the other hand, at the crystallizable temperature range of 60-140 °C, the crystallized P(D-2HB)-b-PDLA had only PDLA homo-crystallites as crystalline species, reflecting no co-crystallites formation between poly(d-2-hydroxybutyrate) and poly(d-lactide) chains having the same configurations. The equilibrium melting temperature of hetero-stereocomplex crystallites in P(D-2HB)-b-PLLA was 189.0 °C, which was higher than 171.3 °C of PDLA homo-crystallites in P(D-2HB)-b-PDLA. Although the final crystallinity of P(D-2HB)-b-PLLA was higher than those of P(D-2HB)-b-PDLA, the spherulite growth rate of P(D-2HB)-b-PLLA was lower.The regime analysis indicated unusual nucleation mechanism of P(D-2HB)-b-PLLA.