混合序列的强大数定律

讨论了混合序列的Kolmogorov强大数定律,并推广到了在一类广泛的条件下的不同分布的情形。     

Modeling and finite element analysis of rod and wire steel rolling process

Two thermomechanical coupled elastic-plastic finite element （FE） models were developed for predicting the 12-pass continuous rolling process of GCrl 5 rod and wire steel. The distances between stands in the proposed models were set according to the actual values, and the billets were shortened in the models to reduce the calculation time. To keep the continuity of simulation, a technique was developed to transfer temperature data between the meshes of different models in terms of nodal parameters by interpolation functions. The different process variables related to the rolling process, such as temperature, total equivalent plastic strain, equivalent plastic strain rate, and contact friction force, were analyzed. Also, the proposed models were applied to analyze the reason for the occurrence of an excessive spread in width. Meanwhile, it was also utilized to assess the influence of the roll diameter change on the simulated results such as temperature and rolling force. The simulated results of temperature are found to agree well with the measured results.     

端面热电阻在高炉炉皮测温上的应用

炼铁高炉到炉役后期,炉缸已腐蚀严重,原炉体测温用热电耦大部分已损坏并无法修复,采用端面热电阻组成的测温系统,准确快速地检测炉皮的温度,能间接反映内部陶瓷杯的腐蚀情况,在实际应用中取得了很好的效果。     

Study on the Grain Refinement of an Al-Zn-Mg-Cu Alloy Prepared by LFEC Process

Low frequency electromagnetic casting(LFEC)process has been developed for years with the application of an induction coil outside the conventional direct chill(DC)casting mould.It has been demonstrated that the LFEC process has a significant grain refining effect on aluminium alloys.However,how it refines the microstructure is still not clearly understood.In the present work,the temperature measurement were carried out to study the temperature field during casting and to understand the mechanism of the grain refining effect of the LFEC process.The results showed that in contrast to the conventional DC casting process,during the LFEC process,the liquid melt flowing from the launder into the mould is cooled with very high cooling rate directly to 3-6℃below the liquidus and the temperature field of the entire melt in the mould and the hot top is quite uniform,which results in enhanced heterogeneous nucleation and improved survival rate of the nuclei.This is believed to be the main reason why the LFEC process can significantly refine the grain size of aluminium alloys.     

三姓二期航道整治工程分流比变化分析

简述了三姓浅滩概况及二期航道整治工程的效果;报工程前后分流比的变化。     

基于EVC平台的内存映射文件技术研究与应用

本文分析了Win32环境下内存映射文件技术的系统实现原理，并结合嵌入式文件系统的特点，给出了该技术在嵌入式实时通讯系统中对多进程间数据共享问题的解决方案，提高了系统的实时性，具有一定的推广价值。     

多弧离子镀与磁控溅射共沉积TiN/TiCN多层膜的高温抗氧化性能

TiN/TiCN多层膜的高温抗氧化性研究对于扩大其应用领域具有重要作用,但目前鲜见相关报道。采用多弧离子镀与磁控溅射技术以不同调制周期在304不锈钢表面共沉积TiN/TiCN多层膜。采用XRD、XPS、倒置显微镜及高温氧化试验研究了多层膜的高温抗氧化行为。结果表明:TiN/TiCN多层膜表面光滑平整、均匀致密,薄膜主要为具有Ti-(C,N)键的fcc-TiN结构;随着调制周期的减小,TiN/TiCN多层膜生长取向发生转变,且具有(111)晶面生长织构;随着氧化温度的升高,多层膜的显微硬度逐渐降低,氧化增重速率不断增大,且在700℃之后变化速率较快,薄膜的开始氧化温度约为750℃;随着调制周期的减小,多层膜TiN与TiCN界面层数量增多,促使晶粒细化,提高了其致密性,还隔断了缺陷贯穿薄膜的连续性,显著降低了薄膜的孔隙率,致使O原子扩散困难,增强了薄膜的高温抗氧化性能。     

指针式仪表示值识别系统研究

指针式仪表识别系统采用机器视觉技术和数字图像处理算法,实现了对指针式仪表示值的自动识别.使用图像差影法、自适应阈值分割算法和最小二乘法进行圆心拟合;提出区域分割方法及中心投影法,对表盘图像进行分块处理,提取表盘刻度,快速识别出表盘指针所处位置.实验表明,采用该系统的识别值与目测值的最大偏差为0.16μm,最小偏差为0.10 μm,检定时间缩短为原来的1/1000,提高了检定效率、检定精度和检定结果的准确性.     

Fluorescence recovery assay for the detection of protein-DNA binding

We report a novel and straightforward fluorescence recovery assay which enables the detection of protein-DNA interactions and simultaneously determines relative binding affinities of sequence-specific DNA-binding proteins for a variety of DNA sequences in a multiplexed format. The detection of protein-DNA binding is accomplished by monitoring fluorescence recovery during exonuclease digestion of DNA sequences that are modified with fluorophore-quencher pairs. Retardation of fluorescence recovery occurs with binding of the protein to the putative DNA binding element, which arrests exonuclease digestion. The assay detects protein-DNA binding in a homogeneous solution simply, quickly, and reliably without using radioisotopes. Multiplexing is possible by labeling different DNA sequences with spectrally distinct dyes, allowing simultaneous analysis of experimental and control binding reactions in the same mixture.     

基于组态平台的泵测试系统

按泵测试试验的要求,重点介绍了测试系统的硬件构成、利用组态软件开发试验系统的过程、VB与组态之间的通信及在VB环境下利用最小二乘拟合的方法绘制泵特性曲线。该系统具有容易操作、工作稳定及数据精确等特点。