铁素体球墨铸铁与20钢的闪光对焊

试验使用铁素体球墨铸铁和20钢的实心棒料进行了闪光对焊，通过改变次级电压4～8级，通电时间3～5s，观察其焊接接头组织的变化并测定其抗拉强度。结果表明，接头由三个区组成；当通电时间一定时，抗拉强度随次级电压的升高先减小后增大；当次级电压一定时，抗拉强度随通电时间的增加而增大。在次级电压为8级、通电时间为5s时，抗拉强度达最大值，为370．8MPa，是20钢母材的90.4％，是球墨铸铁母材的83.7％。     

用土壤含水层处理系统去除水库微污染有机物的试验研究

本文针对当前中国饮用水源污染以微污染为主的特点，以北京三家店水库原水和永定河河道砂为研究对象，设计了用于表征土壤含水层处理系统的一维土柱，进行污水净化效果的试验研究。结果表明，土壤含水层处理系统对三家店水库微污染水中的有机物有一定的去除效果，在0．12m／d的水力负荷条件下，对CODMo去除率虽然仅为15％，但是出水达到了地表水Ⅱ类水质标准；对BOD5的去除率达到了55％，可以被有效地去除。渗透速率相同时，水力负荷周期对去除效果的影响不明显，但在保证一定水力负荷的情况下，可适当延长落干期，恢复土壤的渗透能力，达到较好的处理效果。同时，土壤含水层处理系统的净化能力主要发生在土层50cm以内。     

Modeling for local dynamic behaviors of phenol biodegradation in bubble columns

A coupled three-dimensional (3-D) model, combining hydrodynamics with biochemical reactions, was developed to simulate the local transient flow patterns and the dynamic behaviors of cell growth and phenol biodegradation by yeast Candida tropicalis in the bubble-column bioreactor, using the computational fluid dynamic (CFD) method. In order to validate this proposed model effectively, the validation of the local hydrodynamic characteristics of the gas-mineral salt solution (gas-liquid) two-phase system, with the phenol concentration of 1200 mg/L, and with the absence of cells, was performed in a square-sectioned bubble column bioreactor using the LDA system and conductivity probe. Furthermore, the validation of phenol biodegradation behaviors by yeast Candida tropicalis at different initial concentrations of phenol and cell was also carried out in the above bubble-column bioreactor. The results indicated that the model simulations had a satisfying agreement with the experimental data. Finally, the local instantaneous flow and phenol biodegradation features including gas holdup, gas velocity, liquid velocity, cell concentration and phenol concentration inside the bioreactor were successfully predicted in different-scale bubble columns by the proposed model. © 2006 American Institute of Chemical Engineers AIChE J, 2006     

Hydrothermal Reaction Mechanism and Pathway for the Formation of K2Ti6O13 Nanowires

Calculations and detailed first principle and thermodynamic analyses have been performed to understand the formation mechanism of K₂Ti₆O₁₃ nanowires (NWs) by a hydrothermal reaction between bulk Na₂Ti₃O₇ crystals and a KOH solution. It is found that direct ion exchange between K⁺ and Na⁺ plus H⁺ interactions with [TiO₆] octahedra in Na₂Ti₃O₇ promote the formation of an intermediate H₂K₂Ti₆O₁₄ phase. The large lattice mismatch between this intermediate phase and the bulk Na₂Ti₃O₇ structure, and the large energy reduction associated with the formation of this intermediate phase, drive the splitting of the bulk crystal into H₂K₂Ti₆O₁₄ NWs. However, these NWs are not stable because of large [TiO₆] octahedra distortion and are subject to a dehydration process, which results in uniform K₂Ti₆O₁₃ NWs with narrowly distributed diameters of around 10 nm.     

Diameter NASREQ协议在卫星移动通信系统中的应用研究

如何对接入网络的用户进行身份认证、授予相应权限并进行计费,是卫星移动通信系统网络管理需解决的重要问题。简要介绍认证、授权、计费(AAA)的基本概念,分析Diameter协议框架、协议原理以及协议应用于网络接入的特点。阐述协议中包含的各种应用,给出Diameter NASREQ应用的一种系统模型。重点研究Diameter NASREQ协议在卫星移动通信系统中的应用,详述应用中客户机和服务器中各模块的功能和工作原理。通过分析,说明该应用的可行性及有效性。     

A 3-D Enlarged Cell Technique (ECT) for the Conformal FDTD Method

In this paper, we present an enlarged cell technique (ECT) to avoid the time step reduction encountered in the conformal finite-difference time-domain (CFDTD) method due to small irregular cells truncated by metallic boundaries. We focus our efforts on the discussion of the accuracy and stability of the ECT and its comparison with other conformal methods, especially the one called the uniformly stable conformal (USC) method. We also provide a simplified ECT, which is much easier to implement. In the ECT, a stability criterion is first constructed to identify instable irregular cells, i.e., those having so small an area to cause instability. Those instable cells are then enlarged into their adjacent cells to obtain a large, stable area. Careful treatment is performed on the communication between the intruding and intruded cells in terms of electromotive force by keeping the total electromotive force conservative. This technique is verified by several 3-D numerical experiments. Results show that the ECT is second-order accurate and numerically stable at the regular Courant time step limit.     

浅议南充丝绸产业基地的招商引资

为在南充形成丝绸产业集群效应，市政府在城南工业集中区内规划土地1000亩用于引进缫丝、织绸、服装等项目的建设，力争用5—8年的时间将南充建设成为全国丝绸产业基地。本人对丝绸产业基地的招商工作一直非常关注，以为如下几点应特别引起重视。     

桉木硫酸盐浆不同漂白技术的评价

高白度漂白商品浆的白度已从通常的88%～90%提高到更高的水平,达到92%.这种高白度的要求导致了纸厂使用高价格光学漂白剂,以及过量使用这种添加剂的环境风险.     

射频识别模块SMC51489在门禁系统中的应用

射频识别系统一般由三部分组成:电子标签(射频卡)、读取器和天线.正确快速的识别电子标签的标签号码,是门禁系统发挥其功能的先决条件.以无源低频射频卡识别模块SMC51489为例,介绍了对射频卡信息读取的原理和方法,并给出了相应的软件编程.实验证明该模块不仅具有较大的读卡距离,而且工作可靠.