Analysis of ATSC field test results in Taiwan

Field tests of the transmission performance of the ATSC DTV system have been conducted in Taiwan. The test results as well as comparisons against the NTSC system performance are reported and analyzed. From the measured results the reception characteristics of the DTV can be deduced and can provide guidelines for television stations to design the transmission system, schedule equipment deployment, plan service coverage areas, and improve the reception quality of the digital signal     

Investigation of the initial stage of borating tantalum

The results of investigation of initial stage of the tantalum borating as well as the effect of oxygen and hydrogen on it are presented. The scheme of the initial stage of tantalum boron saturation is proposed.     

External heat transfer in infiltrated granular beds. Experimental study

Experimental data was obtained on external heat transfer in infiltrated granular beds of coarse particles. It was determined that calcualtions with the proposed model agree satisfactorily with the experimental results.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 6, pp. 919–923, December, 1988.     

Characteristics of tunneling and impact ionization in ZnS:Mn-based thin-film electroluminescent structures

A method for measuring the characteristics of tunneling and impact ionization in thin-film electroluminescent emitters is suggested. This method makes it possible to find time dependences of the space-charge layer thickness near the anode and the length of the impact ionization region, to determine more exactly the time dependence of the field in the potential barrier at the cathode interface, the maximum depth of the surface states from which electron tunneling occurs, the minimum thickness of the barrier, and the electron tunneling probability, as well as the impact ionization rate for the deep centers related to structural defects of the phosphor layer.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

Inclusions of carbon in ingots of silicon carbide grown by the modified Lely method

The problem of the appearance of carbon inclusions in single-crystal silicon carbide ingots grown by the modified Lely method (the so-called graphitization of the ingot) is analyzed. It is shown that the process of graphitization of the ingot is not related to a deficit of silicon in the growth cell; in contrast, it is excess of silicon at the growth surface that inhibits the ingot growth rate and gives rise to intense corrosion of the graphite fittings.     

Audio Denoising by Time-Frequency Block Thresholding

Removing noise from audio signals requires a nondiagonal processing of time-frequency coefficients to avoid producing ldquomusical noise.rdquo State of the art algorithms perform a parameterized filtering of spectrogram coefficients with empirically fixed parameters. A block thresholding estimation procedure is introduced, which adjusts all parameters adaptively to signal property by minimizing a Stein estimation of the risk. Numerical experiments demonstrate the performance and robustness of this procedure through objective and subjective evaluations.     

复合聚全氟乙丙烯材料的介电及高频击穿性能研究

在聚全氟乙丙烯(FEP)中添加 TiO_2和 Al_2O_3,通过热压成型的方法制备了 FEP/TiO_2复合材料和 FEP/Al_2O_3复合材料,研究了氧化物添加量对复合材料介电常数、介电损耗和高频击穿性能的影响。结果表明,随氧化物含量的增加,复合材料的介电常数和介电损耗均增加;在同一添加量下,TiO_2对复合体系的介电性能影响较大。FEP/TiO_2复合材料的高频击穿性能随 TiO_2含量的增加而下降,在 TiO_2含量为4.0%(质量分数,下同)时,复合材料的损伤阈值已降为 FEP 材料损伤阈值的48.9 %。而 FEP/Al_2O_3复合材料的高频击穿性能随 Al_2O_3含量的增加而升高,当 Al_2O_3含量为1.2%时,复合材料的损伤阈值已增大到 FEP 材料损伤阈值的2倍,达到313 J/m~2。