Synthesis and characterization of polypropiolate sodium (PPNa)-Fe3O4 nanocomposite

Polypropiolate sodium (PPNa)-Fe₃O₄ nanocomposites were successfully synthesized by the precipitation of Fe₃O₄ in the presence of sodium polypropiolate and followed by reflux route. Structural, morphological, electrical and magnetic properties evaluation of the nanocomposite were performed by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), vibrating scanning magnetometry (VSM) and conductivity measurements. Crystalline phase was identified as magnetite with an average crystallite size of 7 ± 3 nm as estimated from X-ray line profile fitting. Particle size estimated from TEM, by log-normal fitting, is ∼9 ± 1 nm. FT-IR analysis shows that the binding of PPNa on the surface of iron oxide is through bidentate linkage of carboxyl group. TGA analysis showed the presence of 20% PPNa around 80% magnetic core (Fe₃O₄)…PPNa-Fe₃O₄ nanocomposite show superparamagnetic characteristics at room temperature. It is found that the a.c. conductivity of the nanocomposites obeys the well-known power law of frequency in which it also depends on temperature. Additionally, its d.c. conductivity showed that two operating regions of the activation energy. Both real and imaginary parts of either permittivity exhibit almost the same attitudes which are the indication of the same ability in the stored energy, and dissipation of energy within the PPNa and PPNa-Fe₃O₄ nanocomposites.     

Electrorheological properties of kaolinite,polyindole, and polyindole/kaolinite composite suspensions

In this study, polyindole (PIN) and polyindole/kaolinite (PIN/KAO) composite were synthesized by free radical polymerization using FeCl₃ as an initiator. Average particle sizes (d₅₀) of PIN and PIN/KAO composite were determined by dynamic light scattering (DLS) as 7.2 and 6.2 μm, respectively. The samples were characterized by FTIR, elemental analysis, DSC/TGA and SEM measurements. Suspensions of KAO, PIN, and PIN/KAO composite were prepared in silicone oil (SO) and the sedimentation stabilities were determined. Electrorheological (ER) properties of these suspensions were studied as a function of dispersed phase concentration, shear rate, shear stress, and temperature; and yield stresses and excess shear stresses determined. Further, dielectric properties of KAO, PIN, and PIN/KAO composite were investigated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine): Molar mass effects on strong electrorheological response

Electrorheological (ER) fluids display remarkable rheological behavior, being able to convert rapidly and repeatedly from a fluid to a solid‐like when an external electric field (E) is applied or removed. In this study, electrical and ER properties of poly(Li‐2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), poly(Li‐HEMA)‐co‐poly(4‐VP), copolymeric salts (ionomers) were investigated. For this purpose six ionomers were synthesized with different molar masses. They were then ground‐milled for a few hours to obtain micron size ionomers. The particle sizes of the ionomers were determined by dynamic light scattering. Suspensions of ionomers were prepared in silicone oil (SO), at a series of concentrations (c = 5–30%, m/m). The gravitational stability of suspensions against sedimentation was determined at constant temperature (T = 25°C). Flow times of the suspensions were measured under no electric field (E = 0 kV/mm), and under an external applied electric field (E ≠ 0 kV/mm) strengths and a strong ER activities were observed for all the poly(Li‐HEMA)‐co‐poly(4‐VP)/SO suspensions. Further, the effects of suspension concentration, mole ratios of poly(HEMA) and poly(4‐VP), and the overall molar mass of the copolymers, shear rate, electric field strength, frequency, promoter, and temperature onto ER activities of ionomer suspensions were investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1065–1074, 2006     

Dielectric and microstructural properties of YAG:Dy3+ ceramics

Yttrium aluminium garnet(Y_3 Al_5 O_(12):YAG) singly doped with Dy3+ at different concentrations was prepared by solid state reactions using repeated heating cycles over the temperature range of 1300-1600 ℃. X-ray powder diffraction analysis confirms the presence of a well-crystallized YAG perovskite phase with cubic structure(by Rietveld refinement). The rare earth dopant is successfully integrated into the YAG host lattice without any major changes in the original structure. The temperature dependence,up to 250 ℃, of the conductivity, dielectric constant, dielectric loss, and loss tangent, at various frequencies of up to 5.0 MHz for undoped and doped crystals is compared to understand the electrical and structural characteristics. The experimental results reveal that Dy3+ dopants in YAG crystal significantly influence the conductivity, dielectric constant, and lossy mechanisms, which is probably due to the 3 d-AI ions and 4 f-Dy ions incorporated at different positions of both tetrahedral and octahedral symmetries in YAG:xDy3+ ceramics.     

Microfabricated Biomaterials for Engineering 3D Tissues

Mimicking natural tissue structure is crucial for engineered tissues with intended applications ranging from regenerative medicine to biorobotics. Native tissues are highly organized at the microscale, thus making these natural characteristics an integral part of creating effective biomimetic tissue structures. There exists a growing appreciation that the incorporation of similar highly organized microscale structures in tissue engineering may yield a remedy for problems ranging from vascularization to cell function control/determination. In this review, we highlight the recent progress in the field of microscale tissue engineering and discuss the use of various biomaterials for generating engineered tissue structures with microscale features. In particular, we will discuss the use of microscale approaches to engineer the architecture of scaffolds, generate artificial vasculature, and control cellular orientation and differentiation. In addition, the emergence of microfabricated tissue units and the modular assembly to emulate hierarchical tissues will be discussed.     

Electrorheological properties and creep behavior of polyindole/poly(vinyl acetate) composite suspensions

In this study, electrorheological (ER) properties of polyindole (PIN) and polyindole/poly (vinyl acetate), (PIN/PVAc) conducting composites having different compositions were investigated. Conductivities and dielectric properties of these composites were determined. The particle sizes of the composites were determined by dynamic light scattering method. Suspensions of PIN and PIN/PVAc composites were prepared in silicone oil, at several concentrations (c = 5–25%, m/m) and their sedimentation stabilities were determined. Then the effects of dispersed particle concentration, shear rate, electric field strength, frequency, and temperature onto ER activities of suspensions were investigated. The flow times of these suspensions at various dc electric field strengths were measured. Further, creep tests were applied to the composite suspensions and a reversible viscoelastic deformation was observed.     

Carotid-jugular arteriovenous fistula and cerebrovascular infarct: a case report of an iatrogenic complication following internal jugular vein catheterization

Central venous catheterization is frequently performed for perioperative management and long-term intravenous access. Although complications associated with central venous catheter insertion have been widely reported, there are few reports of carotid-jugular arteriovenous fistula formation. Endovascular procedures are associated with a risk of immediate and delayed thromboembolic and ischemic complications. We describe a case of a carotid-jugular arteriovenous fistula and a cerebrovascular infarct following the insertion of a double-lumen catheter for hemodialysis access. We provide recommendations for the prevention and the early detection of this iatrogenic complication.     

Electrical and dielectric characteristics of Al/polyindole Schottky barrier diodes. II. Frequency dependence

The dielectric properties and ac electrical conductivity of Al/polyindole (Al/PIN) Schottky barrier diodes (SBDs) were investigated by using admittance spectroscopy (capacitance–voltage [C‐V] and conductance–voltage [G/ω‐V]) method. These C‐V and G/ω‐V characterizations were performed in the frequency range of 1 kHz to 10 MHz by applying a small ac signal of 40 mV amplitude from the external pulse generator, whereas the dc bias voltage was swept from (−10 V) to (+10 V) at room temperature. The values of dielectric constant (ε′), dielectric loss (ε″), dielectric loss tangent (tanδ), real and imaginary part of electrical modulus (M′ and M″), ac electrical conductivity (σ_ac), and series resistance (R_s) of the Al/PIN SBDs were found to be quite sensitive to frequency and applied bias voltage at relatively low frequencies. Although the values of the ε′, ε″, tanδ, and R_s of the device were observed to decrease with increasing frequencies, the electric modulus and σ_ac increased with increasing frequency for the high forward bias voltages. These results revealed that the interfacial polarization can more easily occur at low frequencies and that the majority of interface states (N_ss) between Al and PIN, consequently, contribute to deviation of dielectric properties of the Al/PIN SBDs. Furthermore, the voltage‐dependent profile of both R_s and N_ss were obtained from the C‐V and G/ω‐V characteristics of the Al/PIN SBDs at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,conductivity and dielectric characterization of salicylic acid–Fe3O4 nanocomposite

We report on the synthesis of water dispersible salicylic acid –Fe₃O₄ nanocomposites via a co-precipitation route by using Fe(III) and Fe(II) chloride salts, and salicylic acid. Crystalline phase was identified as Fe₃O₄ and the crystallite size was obtained as 13 ± 6 nm from X-ray line profile fitting. As compared to the particle size of 20 nm obtained from TEM analysis these particles show polycrystalline nature. The capping of salicylic acid around Fe₃O₄ nanoparticles was confirmed by FTIR spectroscopy, the interaction being via bridging oxygens of the carboxylate and the nanoparticle surface. ac and dc conductivity measurements performed on the nanocomposite revealed semiconductor characteristics and varying trends with temperature due to reorganization of the nanocomposite. Permittivity measurements showed increasing dielectric constant with increasing temperature as expected from semiconductors. Analysis of electrical modulus and dielectric permittivity functions suggest that ionic and polymer segmental motions are strongly coupled in the nanocomposite.     

Application of an asymmetrical four point bend shear test to solder joints

The asymmetrical four-point bend shear (AFPB) test method was used to measure the shear strength and creep properties through the stress relaxation experiments using three different Pb-free solder joint compositions in an assolidified condition. Since it was difficult to shear the uniform specimens and the local bending usually occurs at the inner loading points, the notches were introduced at the joint line to preferentially weaken this region. The stress analysis by finite element modeling showed that the straight notches transform the parabolic shear stress distribution in the uniform specimen into a relatively uniform shear distribution along the bond line in the notched specimens. Therefore, the shear strength results from the notched specimens are expected to be much more accurate. Experiments showed that both the Sn-3.6Ag-1Cu (wt.%) and Sn-3.6Ag-1Cu-0.45Co joints have superior strength and creep properties as compared to the Sn-3.5Ag joint. However, there was no statistical difference between the shear strength of the Sn-3.6Ag-1Cu and Sn-3.6Ag-1Cu-0.45 Co joints. Moreover, the difference between the creep resistance of these two types of joints was small.