Structural,thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

In the presented study, the structural, thermal, and mechanical properties of the nanocomposites were investigated by doping silanized hexagonal boron carbide (h-B₄C) nanoparticles in varying proportions (0.5%, 1%, 2%, 3%, 4%, and 5%) into the epoxy resin by weight. For this purpose, the surfaces of h-B₄C nanoparticles were silanized by using 3-(glycidyloxypropyl) trimethoxysilane (GPS) to improve adhesion between h-B₄C nanoparticles and epoxy matrix. Then, the silanized nanoparticles were added to the resin by ultrasonication and mechanical stirring techniques to produce nanocomposites. The bond structure differences of silanized B₄C nanoparticles (s-B₄C) and nanoparticle doped composites were investigated by using Fourier transform infrared spectroscopy. Scanning electron microscopy and energy dispersion X-ray spectroscopy (SEM-EDS) technique was used to examine the distribution of nanoparticles in the modified nanocomposites. Differential scanning calorimetry and thermogravimetric analysis techniques were used to determine the thermal properties of the neat and s-B₄C doped nanocomposites. The tensile test and dynamic mechanical analysis were performed to determine the mechanical properties. When the experimental results were examined, changes in the bonding structure of the s-B₄C nanoparticles doped nanocomposites and significant improvements in the mechanical and thermal properties were observed. The optimum doping ratio was determined as 2% by weight. At this doping ratio, the T_g, tensile strength and storage modulus increased approximately 18%, 35%, and 44% compared to the neat composite, respectively.     

Robust‐Adaptive Control Strategies for a Time Delay Bioelectrochemical Process Using Interval Observers

The paper addresses the design and the analysis of adaptive and robust‐adaptive control strategies for a complex recycled wastewater treatment bioprocess. The design procedures are developed under the realistic assumptions that the bacterial growth rates are unknown and the influent flow rates are time‐varying and uncertain, but some lower and upper bounds of these uncertainties are known. The proposed control structures are achieved by combining a linearizing control law with an appropriately (asymptotic or interval based) state observer and with a parameter estimator used for on‐line estimation of unknown kinetics. These approaches are applied to a complex time delay bioprocess resulting from the association of a recycling bioreactor with an electrochemical reactor. Numerical simulations are performed in order to validate the proposed algorithms.     

Dynamic stability of a shaft system connected through a Hooke's joint

Dynamic stability of the torsional vibrations of a shaft system consisting of two torsionally elastic shafts interconnected through a Hooke's joint is investigated by means of a two degree-of-freedom model. The linearized equations of motion are shown to consist of a set of Mathieu-Hill equations and stability of their solutions is analyzed by means of a monodromy matrix method. Results are presented in the form of stability charts constructed on various parameter planes visualizing the effect of various selected pairs of system parameters on the stability.     

Image blur and energy broadening effects in XPEEM

We report image blurring and energy broadening effects in energy-filtered XPEEM when illuminating the specimen with soft X-rays at high flux densities. With a flux of 2×10¹³ photons/s, the lateral resolution in XPEEM imaging with either core level or secondary electrons is degraded to more than 50 nm. Fermi level broadening up to several hundred meV and spectral shift to higher kinetic energies are also systematically observed. Simple considerations suggest that these artifacts result from Boersch and Loeffler effects, and that the electron-electron interactions are strongest in the initial part of the microscope optical path. Implications for aberration corrected instruments are discussed.     

Subquadratic Algorithms for 3SUM

We obtain subquadratic algorithms for 3SUM on integers and rationals in several models. On a standard word RAM with w-bit words, we obtain a running time of . In the circuit RAM with one nonstandard AC ⁰ operation, we obtain . In external memory, we achieve O(n ²/(MB)), even under the standard assumption of data indivisibility. Cache-obliviously, we obtain a running time of . In all cases, our speedup is almost quadratic in the “parallelism” the model can afford, which may be the best possible. Our algorithms are Las Vegas randomized; time bounds hold in expectation, and in most cases, with high probability.     

Interpretation of MR images using self-organizing maps and knowledge-based expert systems

A new image segmentation system is presented to automatically segment and label brain magnetic resonance (MR) images to show normal and abnormal brain tissues using self-organizing maps (SOM) and knowledge-based expert systems. Elements of a feature vector are formed by image intensities, first-order features, texture features extracted from gray-level co-occurrence matrix and multiscale features. This feature vector is used as an input to the SOM. SOM is used to over segment images and a knowledge-based expert system is used to join and label the segments. Spatial distributions of segments extracted from the SOM are also considered as well as gray level properties. Segments are labeled as background, skull, white matter, gray matter, cerebrospinal fluid (CSF) and suspicious regions.     

Photosensitized free radical polymerization using pyridinium salts

Summary The polymerization of methyl methacrylate (MMA), ethyl acrylate (EA), styrene (St) and 2-vinyl pyridine (VP) is initiated upon irradiation at >350 nm of dichloromethane solutions containing N-ethoxy-2-methylpyridinium hexafluorophosphate (EMP⁺PF₆ ^-) and anthracene or thioxanthone. Initiation mechanisms involving the formation of ethoxyl radicals during the decomposition of EMP⁺ ions via electron transfer are proposed.     

Evaluation of hydrogen bonding ability of liquids and solids by C-13 NMR. Silica gel as a strong hydrogen bond donor

The chemical shift difference between signals of C() and C() of unsaturated ketones, , which we used before to measure acid strengths, has now been used to evaluate the hydrogen bond donor ability of solvents which are not acidic enough to hydronate the indicator. For such solvents there is no general correlation between H-bond donor ability and acid strength: hexa-fluoroisopropanol is a much weaker acid than acetic acid, but it is a stronger H-bond donor. The method can be applied to evaluate the H-bonding properties of solid surfaces, and it was thus found that silica gel has a much stronger H-bond donor ability than methanol or acetic acid.