单晶金刚石膜与多晶金刚石膜的制备工艺及性能

本文主要介绍了用微波等离子体化学气相沉积法(以下简称MP CVD法)以甲醇-氢气混合气和丙酮-氢气混合气为源气体,分别以单晶硅的(111)面和人造金刚石的(100)面为衬底材料,制备出了面积为20mm×20mm厚为10μm的多晶金刚石膜和面积为1.0mm×1.0mm厚为5μm的单晶金刚石膜。通过试验发现,源气体配比和衬底温度对薄膜质量起决定性作用。另外,衬底在反应腔中的位置对薄膜的生成也有很大影响。单晶金刚石膜制备过程中衬底金刚石的晶体取向与金刚石薄膜的生长及质量有密切的关系。在金刚石的(100),(110)和(111)面上分别获得了单晶金刚石膜和金刚石多晶粒子。选用扫描电镜、显微激光拉曼、反射电子衍射对多晶金刚石膜及单晶金刚石膜的性能进行了测试。     

An FAR-SW based approach for webpage information extraction

Automatically identifying and extracting the target information of a webpage, especially main text, is a critical task in many web content analysis applications, such as information retrieval and automated screen reading. However, compared with typical plain texts, the structures of information on the web are extremely complex and have no single fixed template or layout. On the other hand, the amount of presentation elements on web pages, such as dynamic navigational menus, flashing logos, and a multitude of ad blocks, has increased rapidly in the past decade. In this paper, we have proposed a statistics-based approach that integrates the concept of fuzzy association rules (FAR) with that of sliding window (SW) to efficiently extract the main text content from web pages. Our approach involves two separate stages. In Stage 1, the original HTML source is pre-processed and features are extracted for every line of text; then, a supervised learning is performed to detect fuzzy association rules in training web pages. In Stage 2, necessary HTML source preprocessing and text line feature extraction are conducted the same way as that of Stage 1, after which each text line is tested whether it belongs to the main text by extracted fuzzy association rules. Next, a sliding window is applied to segment the web page into several potential topical blocks. Finally, a simple selection algorithm is utilized to select those important blocks that are then united as the detected topical region (main texts). Experimental results on real world data show that the efficiency and accuracy of our approach are better than existing Document Object Model (DOM)-based and Vision-based approaches.     

铜陵一冶环保治理工程的设计

介绍冶炼烟气制本系统环保治理工程的工艺设计及生产运行情况。污水处理系统采用中和曝气加铁盐除砷工艺，引进了戈尔膜过滤器。尾气处理系统，采用石灰中和法，引进动波洗涤技术和关键设备。环保治理工程投产后，废气均达标排放。     

大孔树脂分离纯化商陆红色素的研究

研究了几种大孔吸附树脂和离子交换树脂对商陆红色素的静态吸附特性,筛选出一种吸附性能较好的树脂,并应用柱层析进行商陆红色素的分离纯化研究。实验结果表明:D301离子交换树脂对商陆红色素的静态吸附率达到96.0%,柱层析吸附饱和后用0.15 mol/L HCl洗脱时,洗脱率达到92.8%,洗脱液经低温干燥得到的商陆红色素色价达到45.9。     

需求依赖于价格情境下基于Copula-CVaR 的报童决策

探讨价格不确定下,需求-价格相关性与风险态度对决策行为的影响.建立随机需求与随机价格相关情境下基于Copula-CVaR的报童决策模型,Copula函数描述相关性,条件风险价值(CVaR)反映风险态度,证明了模型解的存在性和惟一性.蒙特卡罗模拟发现,需求与价格的相关性与风险态度对决策的交互作用使决策行为发生规律性变化,决策者对价格波动有一定容忍度,需求与价格相关性趋于不相关与完全负相关时市场趋于同质性.     

新型不锈钢化学抛光剂工艺研究

叙述了一般不锈钢化学抛光溶液的基本类型和在实际应用中存在的问题。着重论述MW－6不锈钢化学抛光剂的工艺研究过程、工艺条件、质量指标及检测方法，同时介绍了它与传统不锈钢化学抛光剂的比较，经验价值，表面质量控制，应用领域及应用前景。     

Study on esterification of acrylic phenolic resin by maleic anhydride and photocrosslinking properties of the alkali‐soluble product

An alkali‐soluble, photocrosslinkable polymer was synthesized by esterification of OH groups of acrylic phenolic resin with maleic anhydride. The OH groups were formed by the ring‐opening reaction of epoxy groups of epoxy phenolic resin with acrylic acid. The esterification conditions were studied. The results showed that it is better to use tetramethyl ammonium bromide as catalyst than N,N‐dimethylbenzylamine. The conversion of maleic anhydride in acetone can reach about 80% at 56°C for 4 h. The purified product was characterized by IR, DSC, and TGA. The product containing acrylate and maleic acid monoester groups, above a certain content, can be dissolved in 1% Na₂CO₃ solution. The photocrosslinkable properties of the product were investigated through selection of photoinitiator, accelarator, crosslinkable diluent monomer, etc. The acrylate and maleic acid monoester group‐containing phenolic resin exhibited very good photocrosslinking behavior, since it contains double bonds from both acrylate groups and maleic acid monoester groups. The activity of photoinitiator decreases in the order: isopropylthioanthraquinone > benzoin ethyl ether (BE) > anthraquinone (AQ) > benzophenone > Michel ketone (MK) > 2,2‐diethoxyacetophenone. The combination of some photoinitiators showed synergistic effects. The order of increasing activity for the accelerator is as follows: MK > ethyl p‐(dimethylamino)benzoate > N,N‐dimethylaniline > triethanolamine. The optimum diluent monomer is trimethylolpropane trimethacrylate. The gel content of the mixture of the resin and trimethylolpropane trimethacrylate could reach 85% using the combined photoinitiators of BE and AQ under UV exposure for 120 s. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1607–1614, 2005     

提高φ5m×11.5m生料磨产量的措施

针对粘土资源枯竭问题,江苏巨龙水泥集团实施了以粉煤灰和硅石代替粘土的技改工程。但改造后因原料的变更,导致入房物料易磨性变差而影响了φ5m×11.5m生料磨的产质量,并进一步影响察系统的运行。因此该厂在工艺分析的基础上,采取了调整钢球级配、用高铬球替代合金刚球、改造选粉机、加强石灰石二破的管理和减少系统是否是“漏风”等技术措施,效果显著。改造后的生料磨台时产量比调整前提高了12t/h,且节电效果显著。     

Modeling the curing kinetics for a modified bismaleimide resin using isothermal DSC

The kinetics of curing for a modified bismaleimide (BMI) resin was investigated to ascertain a suitable cure model for the material. The resin system used in this study was composed of 4,4′‐bismaleimidodiphenylmethane (BMIM) and 0,0′‐diallyl bisphenol A (DABPA, DABA). The BMIM was the base monomer and the DABPA was the modified agent. A series of isothermal DSC runs provided information about the kinetics of cure in the temperature range 170–220°C. Regardless of the different temperatures, the shape of the conversion curves was similar, and this modified BMI resin system underwent an nth‐order cure reaction. Kinetic parameters of this BMI resin system, including the reaction model, activation energy, and frequency factor, were calculated. From the experimental data, it was found that the cure kinetics of this resin system can be characterized by a first‐order kinetic model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3338–3342, 2004     

Phase Relations in the System Al2O3–B2O3–Nd2O3

The phase relations at a temperature below "subsolidus" in the system Al₂O₃–B₂O₃–Nd₂O₃ are reported. Specimens were prepared from various compositions of Al₂O₃, B₂O₃, and Nd₂O₃ of purity 99.5%, 99.99%, and 99.9%, respectively, and fired at 1100°C. There are six binary compounds and one ternary compound in this system. The ternary compound, NdAl₃(BO₃)₄ (NAB), has a phase transition at 950°C ± 15°C. The high-temperature form of NAB has a second harmonic generation (SHG) efficiency of KH₂PO₄ (KDP) of the order of magnitude of the form which has been used as a good self-activated laser material, and the low-temperature form of NAB has no SHG efficiency.