Synthesis and characterization of caprolactone based polyurethane with degradable and antifouling performance

In this work,a degradable polyurethane composed of caprolactone(CL)and L-Lactide(LLA)as soft seg-ments,and 4,4'-methylenebis(cyclohexyl isocyanate)(H12MDI)and polytetramethylene ether glycol(PTMEG)as hard segments,was prepared.Hydrolytic degradation experiment revealed that the degrad-able polyurethane(PU)could be degraded in artificial seawater.It also showed that caprolactone-co-polyurethane(CL-PU)copolymer with higher crystallinity degraded much slower in artificial seawater.However,the introduction of LLA resulted in an increase in the hydrophilicity and reduction in the crys-tallinity of degradable PU,as demonstrated by the contact angle analysis.The result of the scanning elec-tron microscope showed that the surface of degradable PU renewed under static condition.Moreover,degradable PU was able to be used as a carrier,and it controlled the release rate of 4,5-dichloro-2-octyl-isothiazolone(DCOIT).The anti-diatom(Navicula incerta)test demonstrated that the(caprolactone-co-L-lactide)-co-polyurethane 4(CL/LAx-PU4)with DCOIT contents prevented the adhe-sion of diatom Navicula incerta(88.37％reduction)due to their self-polishing and the release of antifou-lants.Therefore,the degradable PU consisted of CL,LLA,and DCOIT could be a durable resin with good antifouling activity for the application in the marine anti-biofouling field.     

纳米MOFs及其衍生物在超级电容器中的研究进展

金属有机框架（MOFs）材料因其大的比表面积、可调控的孔道结构和丰富的活性位点引起了国内外学者们的广泛关注。近年来MOFs基材料广泛应用于能量储存与转化领域,但大多数MOFs基材料的低稳定性和低导电性等缺陷限制了其实际应用。通过对MOFs基材料进行改性,如采用共轭度高的有机配体以增加MOFs材料的稳定性,或MOFs衍生物以提高其氧化还原活性位点和导电性,从而达到提高MOFs基电极材料的电化学性能。主要介绍了原始MOFs及其衍生材料如碳材料、金属氧化物、金属硫化物、金属氢氧化物和金属磷化物等在超级电容器电极材料中的最新研究进展。研究表明,多金属MOFs材料或多金属MOFs衍生物有利于提高电极材料的电化学性能,而导电MOFs材料或MOFs衍生物中的碳材料有利于提高电极材料的导电性。最后对MOFs基电极材料在电化学储能领域中的研究做出了展望,指出MOFs基材料的形貌、组分和导电性是未来研究的发展方向。     

磁场凝固处理对稀土贮氢合金结构和电化学性能的影响

研究了贮氢合金凝固过程中施加直流磁场处理对其组织结构和电化学性能的影响。结果表明：磁场处理没有改变AB5型贮氢合金的CaCu5型六方体结构，但使晶胞常数α0、c0增加，晶胞体积增大；合金的电化学容量变化不大，却明显改善了其高倍率放电（C）性能和循环寿命，合金在5C的放电容量提高了27．8％，S200由0．68上升到0．81；合金中氢的扩散系数增大。     

Fe－Nb－C合金的高温内耗

测量了高纯Ｆｅ－Ｎｂ－Ｃ合金的４００－８５０℃内耗，发现一个峰温度随测量应变振幅变化的高温（６６６－７４０℃）磁机械滞后阻尼内耗峰。研究了峰的特征、出现、消失条件及升降温、频率、振幅、变形与退火等因素对峰的影响．提出了用内耗实验确定材料中阻碍铁磁畴壁Ｂａｒｋｈａｕｓｅｎ跳动应力的方法和合金中产生磁机械滞后阻尼－温度峰（Ｑ_ｍ~（－１）－Ｔ）的物理机制。     

PZT／Terfenol-D／PVDF层状复合磁电材料谐振特性

采用热压法制备出二层锆钛酸铅(PZT)／聚偏氟乙烯(PVDF)与1层Tb0.28Dy0.72Fe2(Terfenol-D)／PVDF叠层结构的三元复合磁电材料，研究了不同PVDF含量，以及不同层厚比tp／L对样品的介电常数、介电损耗、电阻率、谐振频率以及磁电转换系数αE33，αE31的影响规律，结果显示PVDF的含量和层厚比都存在最佳值(最佳值出现在产0．5，tp／L=2／7)，并且在这个最佳值处，磁电转换系数达到最大。     

双包络TI-环面蜗杆传动的二次包络分析

在一次包络分析的基础上,着重进行了二次包络齿面接触分析,推导出了蜗杆和蜗轮齿面方程。齿面接触分析表明：齿面呈双线接触,润滑条件好,承载能力大,在重型机械传动装置中具有实用价值。     

聚乙烯加工流变改性剂对LLDPE／HDPE流变性能的影响

本文介绍在ＬＬＤＰＥ（７０４７）／ＨＤＰＥ（６０９８）共混物（重量比为９０：１０）中加０．５％、１．０％、１．３％、１．５％、２％的聚乙烯加工流变改性剂，采ＸＬＹ－Ⅱ型毛细管流变仪测其流变性能。结果表明，加入ＱＬＹ树脂后，该本系的剪切速率增，表观粘度下降，活化降低，熔体乃属假塑性流体。     

大液相负荷下斜孔塔板的流体力学性能

针对大液相负荷气液传质操作 ,通过冷模实验 ,重新确定了普通斜孔塔板的液体力学性能 ,并给出了新的关联式。同时基于普通正排斜孔塔板在大液量操作条件下压降大 ,泄漏和雾沫夹带严重等缺点 ,沿用梯形导向浮阀的思想 ,提出了变正排为斜排的改进方案 ,并在相同条件下对两者的液体力学性能进行初步比较。证明了斜排斜孔塔板是一种适合大液体处理量且操作弹性较宽的塔板     

Simulation of Nonstationary Spring Discharge Using Time Series Models

We present a detailed analysis and comparison of two time series models, i.e., ARIMA and ARIMA-GARCH, to simulate the discharge of a karst spring (Niangziguan Springs (NS) complex) in the northern China. Statistical tests for the residuals are applied to examine the reasonability of the models. Statistically, both models are reasonably good to simulate the mean value of the discharge of the NS complex. The statistical test shows that the residual discharge data have conditional time-varying variance and volatility clustering, known as heteroscedasticity of the data. Calibration test shows that the ARIMA-GARCH model gives a varying confidence interval, which can more effectively capture the heteroscedasticity of the data, comparing with a constant confidence interval in the ARIMA model. In the validation and application process, we applied two approaches to simulate the discharge data: (1) fixed models, and (2) evolving models. The confidence interval width monotonically increases in both fixed models, and the fixed ARIMA-GARCH model has faster increasing confidence interval width than the fixed ARIMA model. This suggests that the fixed time series models are only suitable for short-term prediction. However, we found that this drawback can be compensated by updating the model once new data become available. Our evolving models show more reasonable confidence interval width for both models. In addition, the application shows that the ARIMA-GARCH model is very sensitive to the data fluctuation. We also found the evolving ARIMA-GARCH model was able to return to the narrow confidence interval width once the fluctuation diminished. Hence, we conclude that the ARIMA-GARCH model is more suitable for the sequences with strong heteroscedasticity.     

PEN/PTT共混聚酯的熔融行为

利用差示扫描量热仪对不同配比的聚萘二甲酸乙二醇酯/聚对苯二甲酸丙二醇酯(PEN/PTT)共混体系的熔融行为进行了分析,发现在共混体系中两组分形成各自的晶体,PEN和PTT的熔点均随另一组分含量的增加而下降。根据Nishi-Wang方程,按300℃计算,由PEN/PTT共混体系中PEN熔点下降计算所得到的相互作用能密度为-0．214 2 J/cm~3,相互作用参数为-0．006 8,表明PEN/PTY共混体系在熔融态是热力学性质稳定的相容体系。