Effects of grain sizes, shapes, and distribution on minimum sizes of representative volume elements of cubic polycrystals

In the literature the concept of representative volume element (RVE) was introduced to correlate the effective or macroscopic properties of materials with the properties of the microscopic constituents and microscopic structures of the materials. However, to date little quantitative knowledge is available about minimum RVE sizes of various engineering materials. In our recent paper [J. Mech. Phys. Solids 50 (2002) 881], a new definition of minimum RVE size was introduced based on the concept of nominal modulus. Numerical experiments using the finite element method (FEM) were then carried out for determining the minimum RVE sizes of more than 500 cubic polycrystals in the plane stress problem, under the assumption that all grains in a polycrystal have the same square shape––called the simple polycrystal model. The major finding is that the minimum RVE sizes for effective elastic moduli have a roughly linear dependence on crystal anisotropy degrees. The present paper takes into account the effect of grain sizes, shapes, and distribution on the minimum RVE sizes for real cubic polycrystals that are formed by crystallization processes. Similar roughly linear dependence is found again, with the slope about 19% lower than that in the simple polycrystal model. This finding is interesting and useful because numerical experiments on minimum RVE sizes for a large number of crystals are quite time-consuming and the simple polycrystal model reduces significantly the FEM pre- and post-processing works. This should be particularly true in numerically testing minimum RVE sizes for three-dimensional polycrystals and for nonelastic properties in future works. With a maximum relative error 5%, all the polycrystals tested have a minimum RVE size of 16 or less times the grain size.     

Generalized difference control of parallel streams temperatures

A furnace with multiple parallel passes and multiple burners is commonly seen in petroleum refineries. In order to maintain the furnace running in a safe, stable, and high-efficiency state it is necessary to control the outlet temperatures of the multiple passes to be the same. Due to the fact that the process of the oil heating in such furnace is nonlinear, multivariable, time varying, has serious coupling among passes, has frequent dynamic changes and a large time delay, traditional control methods have trouble in controlling these temperatures, and some advanced control methods, including predictive control, adaptive control, and robust control, are usually too complex for convenient use. In this paper, a control technique, called differences control technique (DsCT), is proposed to distribute the stream flowrates such that the stream temperatures are as identical as possible. The principle of the proposed technique is explained and demonstrated, and the results of its application to a real-life petroleum refinery furnace are also reported. The DsCT technique has the following advantages: it does not need complicated design procedures, the controller structure is simple, it is easy to apply, and it can be canonically applied to furnaces with different number of passes.     

Mobile robot path planning based on hierarchical hexagonal decomposition and artificial potential fields

In this article, a new algorithm based on an artificial potential field and hierarchical cell decomposition technique is developed to solve the find-path problem for a mobile robot. The complete map of the workspace including obstacle locations is assumed to be known a priori. The basic cell structure used for decomposition is a hexagon. The artificial potential field is based on an attractive force from the goal position and repelling forces from the obstacles. Computer simulations of the algorithm for various obstacle scenarios are also presented. © 1994 John Wiley & Sons, Inc.     

糖厂现用连续离心机的研究及生产实践

在各糖厂现用连续离心机原有生产实践基础上，对其机械吸震、加温、布温、机索结构、物料密封、机座等部件做了进一步改进，并取得可观的实效。     

氧化铝/锌合金复合材料界面的SEM观察

利用挤压铸造制备氧化铝／锌合金复合材料，在扫描电镜（ＳＥＭ）上观察复合材料的界面。结果表明，在复合材料中纤维与基体间存在致密界面层，合金元素通过适当的化学反应可改善纤维与基体间的结合；在凝固过程中，纤维／基体界面上的硅在共晶体的共生生长过程中起了领先相作用，导致复合材料的共晶转变是由铝硅共晶转变和锌铝共晶转变两者组成。     

无线电引信多普勒信号增速器的研究

论述了无线电引信多普勒信号增速器的实现原理及意义，介绍了采用ＴＭＳ３２０Ｃ３０作为ＣＰＵ、多片大容量静态ＲＡＭ芯片构成海量存储体的信号增速器硬件结构和软件设计，并提出了今后的研究方向。     

Effects of lacidipine on serum oxygen free radicals and fasting levels of insulin in patients with essential hypertension

Thirty patients with mild to moderate essential hypertension had received four weeks treatment with Lacidipine and serum lipid peroxide (LPO), superoxide dismutase (SOD) and insulin levels were measured before and after treatment. The results showed: (1) there were decreased in SOD activity and increased Lpo content the patients group (P < 0.01); (2) after treated with Lacidipine, the SOD acitvity increased and Lpo content decreased (P < 0.01); (3) Lacidipine had obvious antihypertensive effect with no significant changes in heart rate; (4) Lacidipine had no significant effects on insulin, blood glucose and lipids. The results suggest that lacidipine is a safe and effective antihypertensive agent and can improve the metabolic balances in free radical system.     

地表热释光找油机理的探讨

油气藏的微渗漏造成的上方放射性元素的局部富集（或贫化）影响地表沙土的天然热释光量，据此探讨了热释光找油的机理。     

直流电动机参数测定

根据直流电机的可逆原理并利用常规的实验仪表，可以简便、准确地测出直流电动机的主要参数－电磁转矩、输出转矩和效率．