填充母料及其他常用塑料母料

塑料母料对推动塑料工业的迅猛发展起了很大作用，其主要特点是：可以简化生产工艺过程：原料混合方便，混炼质量均匀，提高生产效率及制品性能指标；减少粉尘飞扬及对设备的磨损；降低制品在换色时清洗螺杆的用料量；延长原料储存的保质期等。     

两步法合成大粒径丁苯胶乳

研究了聚甲基丙烯酸甲酯（MMA）对丁苯（BS）胶乳的附聚作用以增大丁苯胶乳粒径；探讨了无机盐、体系pH值及体系中MMA胶乳与BS胶乳的固含量比（R值）对附聚后丁苯胶乳的粒径及稳定性的影响。结果表明：适当添加无机盐可以稳定胶乳体系，最佳用量（质量分数）为0．1％～0．2％；适当增大体系pH值，可增大胶乳粒径；在附聚过程中，当R值在两个附聚峰附近时，可增大丁苯胶乳的粒径。     

汽车灯用热熔胶的研究及性能表征

介绍了生产汽车灯用热熔胶的各种原料及其在胶粘剂中所起的主要作用，为汽车灯用热熔胶原料的选择提供了参考。还介绍了汽车灯用热熔胶的制备过程和厂家所需的各种性能及其表征方法。通过选择适当的原料及配比，生产出性能优良并具有良好市场前景的产品。     

Fabrication and characterization of nano silver powder prepared by spray pyrolysis

Silver powder was fabricated by spray pyrolysis, using 2%–20% AgNO₃ solution, 336–500 mL/h flux of AgNO₃ solution, 0.28–0.32 MPa flux of carrier gas and in the 620–820 °C temperature range. The effects of furnace set temperature, concentration of AgNO₃ aqueous solution, flux of AgNO₃ aqueous solution as well as carrier gas on the morphology and particle size distribution of silver powder, were investigated. The experimental results showed that with the high concentration of AgNO₃ aqueous solution, the average grain size of silver decreased with the increasing of furnace set temperature. But the gain size distribution was not homogenous, the discontinuous grain growth occurred. With the low concentration of AgNO₃ aqueous solution, the higher furnace set temperature made the nano sliver grains sintered together to grow. Nano silver powder about 100 nm was fabricated by spray pyrolysis, using 2wt% AgNO₃ solutions, 336 mL/h flux of AgNO₃ aqueous solution, 0.32 MPa flux of carrier gas at 720 °C furnace set temperature.     

Analytical investigation on thermal-induced warpage behavior of ultrathin chip-on-flex (UTCOF) assembly

The serious warpage issues of ultrathin chip-on-flex (UTCOF) assembly induced by mismatched thermal stresses have greatly affected the mechanical stability and reliability of emerging ultrathin chip packaging technology. Currently, a theoretical prediction as a convenient and straightforward approach is still lacked for describing effectively the thermal-mechanical behavior of UTCOF during the adhesive curing and cooling process. In consideration of the adhesive thickness approximating to ultrathin chip and flexible substrate thickness, we develop a layerwise-model of ultrathin chip-adhesive-flex structure under plain strain condition, where the behavior of thick adhesive bonding can be described precisely through increasing the subdivided mathematical plies. Further, the analytical results show that the concave and convex forms of ultrathin chip warpage yield at the end of the curing and cooling process respectively. Meanwhile, the effects of its structure dimensions and material properties are also revealed for discussing a way to relieve the extent of ultrathin chip warpage. Additionally, in order to verify the validity of the theoretical prediction, we also introduce the corresponding numerical technique and experimental method. These results suggest that a kind of rigid and ultrathin flexible substrate such as metal foil should be adopted for small warpage of ultrathin assembly.     

水下悬浮隧道锚索涡激动力响应分析

为研究涡激振动和参数振动共同作用下水下悬浮隧道锚索的振动响应,考虑锚索的几何非线性,将管体对锚索的作用简化为轴向激励,建立了悬浮隧道锚索非线性涡激振动方程,并用伽辽金法和龙格-库塔法对悬浮隧道锚索进行数值求解,分析了锚索产生涡激谐振、参数共振时跨中位移响应和轴向力的改变幅度,以及锚索倾斜角度对其振动特性的影响。研究结果表明,锚索产生涡激谐振和参数共振时跨中位移和轴向力大幅增大;垂度效应使得锚索的跨中位移关于平衡位置呈现出不对称性;随着锚索倾角的增大,锚索跨中位移偏移值、一阶固有频率、一阶频率锁定流速都逐渐减小。     

安钢SAP预留系统的开发与应用

本文简述了安钢信息化建设概况,介绍了安钢信息化建设中开发SAP预留系统的设计流程,阐述了预留系统实现的功能.     

液剂视频序列中运动异物的模糊自适应分割

运动异物的正确分割是实现液剂自动检测的关键.提出一种基于帧差图空间方差和方差梯度的液剂异物模糊自适应阈值分割算法.首先将4帧序列图像差分得到的2幅帧差图分为5×5的图像块,计算2幅帧差图对应图像块间的方差和方差梯度,并以两者的乘积构成新特征图;然后使用自适应阈值对新特征图进行运动异物分割和提取.为使阈值能够跟随图像块灰度变化,阈值的调整采用模糊推理依据方差和方差梯度变化自适应实现.实验及实际测试结果表明,该算法能够满足低对比度和局部光照变化的液剂异物实时检测要求,是一种实用有效的图像分割算法.