Influence of Neotyphodium coenophialum on copper concentration in tall fescue

Poor performance of livestock that graze tall fescue (Festuca arundinacea Schreb.) has been associated with the endophyte fungus Neotyphodium coenophialum [Morgan-Jones and Gams] Glenn, Bacon, and Hanlin). Recent evidence suggests lowered Cu status and a depression of Cu-related immune function in steers that graze endophyte-infected (E+) tall fescue. Greenhouse and field studies investigated relationships between the endophyte and Cu concentrations in tall fescue. Seventeen infected 'Kenhy' clones were divided, and one plant of each pair was treated three times with Benomyl to remove the endophyte (E-). Plants were watered with nutrient solution in a greenhouse for 6 mo before sampling. Copper concentrations were greater (P < .001) in E- than in E+ clones (3.4 vs 2.8 microg/g; SE, .06). In the second greenhouse experiment, genetically similar E+ and E- 'Kentucky'-31 (KY-31) and 'Georgia Jessup' were grown from seed and fertilized with nutrient solution to produce mature plants. Copper concentrations were higher (P < .05) in E- than in E+ tall fescue (8.6 vs 7.6 microg/g; SE, .3). In a field plot experiment in Texas, E+ and E- KY-31 were grown with 0, 50, and 100% replacement of potential evapotranspiration. By September, Cu concentrations were higher (P < .05) in E- than in E+ tall fescue (7.3 vs 6.6 microg/g; SE, .2). In pasture experiments, KY-31 E+ (> 70% infection level) and E- (< 5% infection level) tall fescue were grown in Virginia at two locations with three rates of N fertilizer. Copper concentrations were higher (P < .05) in E- than in E+ tall fescue (4.8 vs 4.5 microg/g; SE, .1) and increased (P < .01) linearly in response to N. Our data demonstrate that the presence of the endophyte is associated with lower Cu concentrations in tall fescue, which may contribute to lowered Cu status in animals and thus contribute to the etiology of fescue toxicity.     

Hyperbaric oxygenation and current methods of detoxication in multimodal intensive therapy of diffuse peritonitis

The course of diffuse peritonitis has been followed up in 219 patients, 20 of these with the reactive, 165 with toxic, and 34 with the terminal stages of the condition. Multiple-modality intensive care included, besides routine therapy, local abdominal hypothermia, UV irradiation of autoblood (UVIAB), and, if indicated, hyperbaric oxygenation (HBO) and hemoperfusion. In addition to clinical tests, immunobiochemical monitoring of medium-molecular peptide fractions MM1 and MM2 and index of their distribution, as well as of circulating immune complexes CIC1 and CIC2 and the levels of immunoglobulins IgA, IgM, and IgG were the criteria for assessing the severity of intoxication and efficacy of intensive care and for predicting the course and outcome of the disease. The results indicate that HBO in combination with hemoperfusion, local abdominal hypothermia, and UVIAB have a positive impact on the clinical picture of the disease and on the time course of markers of endogenous intoxication and humoral immunity in patients with the terminal and toxic phases of diffuse peritonitis.     

Effect of vanadium and chromium on the microstructural features of V–Cr–Mn–Ni spheroidal carbide cast irons

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-V-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal VC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized VC particles are found to be sites for the nucleation of carbide eutectics. Cr and V are shown to substitute each other in the VC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. Vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.     

Antibacterial properties of polyaniline derivatives

This work presents a detailed study on the effect of various functional groups both at the ortho position of the aromatic ring and in the amino group of PANI on the antibacterial properties of polymers against gram-positive (Bacillus subtilis) and gram-negative (Pseudomonas aureofaciens) microorganisms. It was found that incorporation of methyl, methoxy, or pentyl groups into the ortho-position of PANI did not increase the antibacterial activity but in most cases causes a significant decrease in the antibacterial properties of functionally substituted polyanilines. At the same time, PANI derivatives modified by incorporation of pentyl groups into the amino group were found to be more efficient antibacterial compounds against both gram-positive and gram-negative microorganisms than the original polymer. It was also found that N-substituted PANI derivatives manifest not only bactericidal but also bacteriostatic properties toward the test microorganisms. Varying the nature and position of the substituent allowed us to conclude that the synthesis of various N-substituted PANI derivatives with a high degree of doping is the most promising approach to PANI modification for application in bacterial growth inhibition.     

Mechanisms of neuronal calcium homeostasis destabilization caused by hyperstimulation of glutamate receptors

The present paper summarizes the data obtained in studying the mechanisms of glutamate-induced deterioration of neuronal Ca2+ homeostasis. In the cultured mammalian central neurons, a short-term (< 1 min) glutamate (GLU, 100 mu) challenge is known to induce a readily reversible (transient) neuronal [Ca2+]i increase. In contrast, a long-term (15-30 min) GLU exposure leads to the appearance of high [Ca2+]i plateau or to the partial recovery of the increased [Ca2+]i. Experiments show that impaired [Ca2+]i recovery in the postglutamate period cannot be explained by the increased [Ca2+]i permeability of the neuronal membrane, as earlier considered. Moreover, a sustained elevation of [Ca2+]i during and after chronic GLU application is associated with a progressive decrease in Ca2+ permeability. The major cause of GLU-induced Ca2+ overload is the mitochondrial depolarization resulted from excessive Ca2+ influx into the mitochondria, the generation of free radicals and the opening of a "giant pore" in the inner mitochondrial membrane. This in turn suppresses both ATP synthesis and Ca2+ electrophoretic uptake into the mitochondrial matrix. In combination with [Ca2+]i-dependent acidification, this leads to the suppression of Ca2+ release from the cell via Na+/Ca2+ exchanger and Ca2+/H+ pump of the neuronal membrane. Therefore, [Ca2+]i recovery following a long-term GLU treatment becomes strongly or even irreversibly compromised.     

Managing complex orthodontic problems: the use of implants for anchorage

In congestive heart failure captopril modifies the left ventricular filling pattern mainly by unloading the heart. We investigated whether the structural characteristics of the left ventricle may influence the acute effects of captopril on this pattern in patients with untreated hypertensive (H group, 6 patients) or idiopathic (I group, 14 patients) cardiomyopathy. We evaluated changes of pulsed Doppler mitral flow, of systemic arterial and wedge pulmonary pressures 40 min after 25 mg captopril administered sublingually, and correlated these changes with the M-mode echocardiographic relative wall thickness index (h/r). Baseline mean arterial pressure (H = 137 +/- 20 mm Hg, mean +/- SD, I = 95 +/- 19 mm Hg; p < 0.001), and h/r (H = 0.38 +/- 0.03, I = 0.28 +/- 0.09; p < 0.05) were greater in the high blood pressure group; wedge pressure, echocardiographic biplane ejection fraction, and Doppler indexes of the left ventricular filling were similar in the two populations. After captopril, ejection fraction did not change significantly, mean arterial pressure decreased significantly in hypertensive patients (H group, baseline = 137 +/- 20, captopril = 119 +/- 10, p = 0.02; I group, baseline = 95 +/- 19, captopril = 90 +/- 24, p = nonsignificant), and the wedge pressure was reduced by the same extent in both groups (H group, baseline = 27.7 +/- 3, captopril = 21 +/- 7, p < 0.05; I group, baseline = 20 +/- 12, captopril = 15 +/- 8, p < 0.05). In the H group early mitral flow increased [(E wave integral) x (mitral annulus area)] by 38 +/- 15%, and was almost steady in the I group (-1.3 +/- 30%; group H vs. I = p < 0.01); late mitral flow [(A wave integral) x (mitral annulus area)] showed a pattern exactly opposite to this (H = +0.4 +/- 40%, I = +38 +/- 19; p < 0.01). In the whole population there was a significant correlation between the early/late flow ratio variations and baseline h/r (r = 0.6, p < 0.05). In chronic congestive heart failure, changes in left ventricular filling with captopril are related to h/r: a higher index, as recorded in the H group, is associated with "true normalization' of the filling pattern after captopril; a lower index, as recorded in the I group, is associated with "pseudonormalization' despite a similar decrease of left ventricular filling pressure.     

Mega-ampere submicrosecond generator GIT-32

The GIT-32 current generator was developed for experiments with current carrying pulsed plasma. The main parts of the generator are capacitor bank, multichannel multigap spark switches, low inductive current driving lines, and central load part. The generator consists of four identical sections, connected in parallel to one load. The capacitor bank is assembled from 32 IEK-100-0.17 (0.17 microF, 40 nH, 100 kV) capacitors, connected in parallel. It stores approximately 18 kJ at 80 kV charging voltage. Each two capacitors are commuted to a load by a multigap spark switch with eight parallel channels. Switches operate in ambient air at atmospheric pressure. The GIT-32 generator was tested with 10, 15, and 20 nH inductive loads. At 10 nH load and 80 kV of charging voltage it provides 1 MA of current amplitude and 490 ns rise time with 0.8 Omega damping resistors in discharge circuit of each capacitor and 1.34 MA530 ns without resistors. The net generator inductance without a load was optimized to be as low as 12 nH, which results in extremely low self-impedance of the generator ( approximately 0.05 Omega). It ensures effective energy coupling with low impedance loads like Z pinch. The generator operates reliably without any adjustments in 40-80 kV range of charging voltage. Maximum jitter (relative to a triggering pulse) at 40 kV charging voltage is about 7 ns and lower at higher charging voltages. Operation and handling are very simple, because no oil and no purified gases are required for the generator. The GIT-32 generator has dimensions of 3200 x 3200 x 400 mm(3) and total weight of about 2500 kg, thus manifesting itself as a simple, robust, and cost effective apparatus.     

Development of a process for melting, out-of-furnace treatment, and casting of a low-carbon metal with a mass fraction of silicon up to 0.03% in a continuous billet caster

A technology developed using the experimental heats performed in OAO ChMK metallurgical works is described. This technology is used to solve a number of steelmaking problems, including an increase in the quality of a metal macrostructure.     

Thin-film cracking of acid tars

The method of thin-film thermal cracking of acid tar to manufacture liquid fuel and coke or liquid fuel and asphaltic binders has been developed. Differential thermal analysis of acid tar samples has been performed. A model of the thin-layer thermal cracking of acid tar and an algorithm for calculating the engineering parameters of the process have been proposed.