A MEMS-based gravity gradiometer for future planetary missions

The gradient in the gravity acceleration is of great interest for planetologists when it can be measured with at least 1 E/√Hz. For this purpose several gravity gradiometer designs are considered. A MEMS-based gradiometer made from a single wafer is considered in this article. Using long springs and small attached masses it is possible to reach a sufficiently low Brownian noise level. The proposed readout for this device will be capacitive plates placed in a comb drive configuration. Trapped charges on these plates can cause noticeable errors when there are more than 0.004 electrons/μm². Measurements show that trapped charge mobility goes down with temperature.     

Energy research and technology development data collection strategies: The case of Greece

The European Union (EU) from the beginning of 2007 has focused its emphasis on the development of a new policy that puts energy back at the heart of EU action. Indeed, it has very often been stated that the difficulty and complexity of achieving green energy targets in the EU will require strengthened measures to promote implementation of new energy technologies (NET), as well as measures to support the related energy Research and Technology Development (R&TD). Often forgotten is the fact, that most of all, a European-wide co-ordinated forum is needed to continuously develop and sophisticate the monitoring and methodology results, bringing together specialised statisticians, energy researchers and experts on energy socio-economics. Today a nebulous picture prevails on the existence of categorized data with regards to energy Research and Technology Development (R&TD) expenditure. In this context, aim of this paper is the presentation of energy R&TD data collection strategies, as well as the related findings for the Greek energy market.     

Seriation by constrained correspondence analysis: A simulation study

One of the many areas in which correspondence analysis (CA) is an effective method, concerns seriation problems. For example, CA is a well-known technique for the seriation of archaeological assemblages. A problem with the CA seriation solution, however, is that only a relative ordering of the assemblages is obtained. To improve the usual CA solution, a constrained CA approach that incorporates additional information in the form of equality and inequality constraints concerning the time points of the assemblages may be considered. Using such constraints, explicit dates can be assigned to the seriation solution. The set of constraints that can be used in CA by introducing interval constraints is extended. That is, constraints that put the CA solution within a specific time frame. Moreover, the quality of the constrained CA solution is studied in a simulation study. In particular, by means of the simulation study we are able to assess how well ordinary, and constrained CA can recover the true time order. Furthermore, for the constrained approach, it is shown that the true dates are retrieved satisfactory. The simulation study is set up in such a way that it mimics the data of a series of ceramic assemblages consisting of the locally produced tableware from Sagalassos (SW Turkey). It is found that the dating of the assemblages on the basis of constraints appears to work quite well.     

Evaluating the development of carbon capture and storage technologies in the United States

Carbon capture and storage (CCS) is seen as an important solution to solve the twin challenge of reducing GHG emissions, while utilizing fossil fuel reserves to meet future energy requirements. In this study an innovation systems perspective is applied to review the development of CCS technologies in the US between 2000 and 2009 and to come up with policy recommendations for technology managers that wish to accelerate the deployment of CCS. The analysis describes the successful built-up of an innovation system around CCS and pinpoints the key determinants for this achievement. However, the evaluation of the system's performance also indicates that America's leading role in the development of CCS should not be taken for granted. It shows that the large CCS R&D networks, as well as the extensive CCS knowledge base, which have been accumulated over the past decade, have not yet been valorized by entrepreneurs to explore the market for integrated CCS concepts linked to power generation. Therefore, it is argued that the build-up of the innovation system has entered a critical phase that is decisive for a further thriving development of CCS technologies in the US. This study provides a clear understanding of the current barriers to the technology's future deployment and outlines a policy strategy that (1) stimulates technological learning; (2) facilitates collaboration and coordination in CCS actor networks; (3) creates financial and market incentives for the technology; and (4) provides supportive regulation and sound communication on CCS.     

Generalised Procrustes Analysis with optimal scaling: Exploring data from a power supplier

Generalised Procrustes Analysis (GPA) is a method for matching several, possibly large, data sets by fitting them to each other using transformations, typically rotations. The linear version of GPA has been applied in a wide range of contexts. A non-linear extension of GPA is developed which uses Optimal Scaling (OS). The approach is suited to match data sets that contain nominal variables. A database of a Dutch power supplier that contains many categorical variables unfit for the usual linear GPA methodology is used to illustrate the approach.     

Comfort of workers in office buildings: The European HOPE project

Previous studies have shown that building, social and personal factors can influence one’s perceived health and comfort. The aim of the underlying study was to get a better understanding of the relationships between these factors and perceived comfort. Self-administered questionnaires from 5732 respondents in 59 office buildings and building-specific data from the European Health Optimisation Protocol for Energy-efficient buildings (HOPE) study were used. Principal Component Analysis (PCA), reliability analyses, and linear regression analysis were performed. The outcome showed that perceived comfort is strongly influenced by several personal, social and building factors and that their relationships are complex. Results showed that perceived comfort is much more than the average of perceived indoor air quality, noise, lighting and thermal comfort responses. Perceived comfort is a phenomenon that deserves more research.     

Growth and adhesion of hot filament chemical vapor deposited diamond coatings on surface modified high speed steel

Diamond coatings were deposited by hot filament chemical vapor deposition on high speed steel substrates. Iron boride diffusion barrier and WC–Co layers were used as interlayers. At high deposition pressure, the quality of the diamond deposits is poor due to the extensive formation of graphitic deposits. At low pressure, diamond films of better quality were obtained, but their adhesion to the substrate was insufficient. A two-step deposition process at low pressure was developed. In a first deposition step performed at high methane percentage, a high nucleation density was achieved. In a second deposition step, the methane percentage was reduced to achieve continuous, dense, and adherent diamond layers on borided or WC–Co coated high speed steel substrates. Adhesion of these diamond layers on the surface modified high speed steel substrates was tested based on reciprocating sliding tests.     

Selective Conversion of Ethane to Ethene via Oxidative Dehydrogenation Over Ca-doped ThO2 Using CO2 as Oxidant

Ca-doped ThO₂, synthesized by solution combustion method was tested for dehydrogenation of ethane with CO₂. Doping ThO₂ with Ca resulted in the creation of oxide ion vacancies and an increased conversion of ethane compared to pure ThO₂. On Th_0.75Ca_0.25O₂ selectivity to ethene was 97 at 46% ethane conversion at 725 °C. Well-known reference catalysts like 5%Cr/TS-1 or OMS-2 showed significantly lower selectivity, but the former was more active under the same conditions.