数字化蓄热式钢包烘烤器及自动控制系统

蓄热式燃烧技术和脉冲燃烧技术是新型的节能环保燃烧技术。数字化蓄热式钢包烘烤器控制系统利用数字化脉冲控制把这两项技术结合在一起。这大大降低了能耗，减少环境污染。本文针对数字化蓄热式钢包烘烤器，提出升温阶段采用自寻优算法，不断调整换向时间，并能记忆最优参数，保证经过几次烘烤后系统整体最优；保温阶段即采用脉冲控制的方法。     

海洋石油平台水下夹桩器本体结构分析

水下夹桩器是一种广泛应用于海洋石油平台建设的液压夹具。水下夹桩器本体焊接在导管架上，支撑夹桩器液压缸。在水下夹桩器本体设计中，采用有限元法完成了对本体强度和刚度的结构分析；建立了有限元分析模型，用ANSYS软件进行结构分析，得到了分析结果，并将该结果与理论计算结果进行了比较，验证了有限元分析技术的有效性。设计结果满足工程要求，为改进和优化结构提供了理论依据，节省了分析计算时间。     

自适应回声对消的初期迭代统计学模型及改进算法

为减少滤波器长度,提出自适应滤波算法初期迭代统计学模型及改进的回声消除算法。提出的统计学模型分析了自适应算法迭代初期滤波器各系数的均值和方差。基于该模型提出的改进算法,先检测回声路径峰值,进而确定回声路径延时,然后以延时为中心,用一个短的滤波器辨识原回声路径活跃系数部分。用实际回声路径进行仿真,理论和实验结果均表明,新算法在迭代的前75～100步已可准确检测回声路径峰值并确定延时;而减少滤波器长度,可大幅提高自适应算法收敛速度并降低算法计算复杂度。     

冶金企业面临的严峻局面及今后工作重点

阐述了冶金企业在当前的严峻形势下，要求得生存必须转变传统观念。并提出“九五”期间的工作重点是：节能降耗、调整品种结构、提高生产率及加强决策管理。重点论述了实现节能降耗应抓好的四项工作：连铸坯一火成材与热装直轧，轧钢炉窑节能技术，轧机主传动交流调速技术及控制冷却技术。     

工业烟气设备的防腐蚀浅析

详细阐述了工业烟气设备装置中的烟道、烟囱、洗涤塔等的腐蚀原理，并针对不同场合的情况分别讨论防腐蚀材料的选择及其结构形式，为工业烟气设备的防腐蚀提供可靠的处理方法。     

Strength, strain-rate sensitivity and ductility of copper with nanoscale twins

We present a comprehensive computational analysis of the deformation of ultrafine crystalline pure Cu with nanoscale growth twins. This physically motivated model benefits from our experimental studies of the effects of the density of coherent nanotwins on the plastic deformation characteristics of Cu, and from post-deformation transmission electron microscopy investigations of dislocation structures in the twinned metal. The analysis accounts for high plastic anisotropy and rate sensitivity anisotropy by treating the twin boundary as an internal interface and allowing special slip geometry arrangements that involve soft and hard modes of deformation. This model correctly predicts the experimentally observed trends of the effects of twin density on flow strength, rate sensitivity of plastic flow and ductility, in addition to matching many of the quantitative details of plastic deformation reasonably well. The computational simulations also provide critical mechanistic insights into why the metal with nanoscale twins can provide the same level of yield strength, hardness and strain rate sensitivity as a nanostructured counterpart without twins (but of grain size comparable to the twin spacing of the twinned Cu). The analysis also offers some useful understanding of why the nanotwinned Cu with high strength does not lead to diminished ductility with structural refinement involving twins, whereas nanostructured Cu normally causes the ductility to be compromised at the expense of strength upon grain refinement.     

Fatigue failure mechanisms in polymers

Fatigue testing of polymers has revealed significant differences between the fatigue response of polymers and metals. Generally, fatigue failure in metals is a process of crack initiation, propagation, and failure. Also, fatigue damage in metals is cumulative and cycle dependent, but remains essentially independent of test frequency. Unlike that of metals, the fatigue behavior of polymers is influenced by viscoelastic effects. At high frequencies, softening and melting occur, and fatigue failure depends largely on the test frequency. At lower frequencies, fatigue failure becomes less sensitive to test frequency and results from crack initiation and propagation. These polymer characteristics arise from the production of hysteresis energy during fatigue. A portion of this energy is released as heat, some of which is dissipated, but most is absorbed in the sample, raising its temperature. This temperature rise leads to degradation of the material and a short fatigue life. Experiments were conducted to measure hysteresis energy and temperature rise for a talc-filled polypropylene. A mathematical model was developed to calculate the energy and temperature distribution during fatigue. Correlation of the temperature rise predicted by the model with that observed experimentally provided values for the various energy terms that quantitatively defined the thermomechanical fatigue response of this polymer.     

东风水库下游临岸潜流带水流场响应规律研究

水库下游临岸潜流带水流场响应规律可用于预测不同水库运行情景下临岸潜流带的水头与流量变化情况。本文以复州河东风水库为例,基于测量数据得到其下游某断面临岸潜流带的水头及流量响应过程,提出响应强度指标的概念,得到简单直观的响应规律经验公式,从而为该水库下游临岸系统的生态建设提供依据,并为水库运行方案的生态影响评价提供参考。     

多酚氧化酶催化单宁的氧化聚合反应研究

研究了多酚氧化酶催化单宁的氧化聚合反应情况 ,探索了反应条件及 7种化合物对酶活性的抑制效果 ,对产物进行了红外光谱和紫外光谱测试 ,相对粘度法测定了产物的分子量。结果表明 ,反应的最佳条件是pH为 5 .2 9,温度为 3 0℃ ,在所用抑制剂中 ,硫酸铜的抑制作用最强 ,与单宁酸的IR图相比 ,产物的 -OH吸收带变窄 ,在 12 60cm-1处吸收峰增强 ,而紫外吸收无变化。产物平均分子量为 3 5 41,说明多酚氧化酶能催化单宁的氧化聚合