基于高光谱数据和雷达融合的滑坡信息提取

为了改进微地形滑坡遥感影像分类技术,从而提高微地形滑坡遥感信息提取的精度,采用湖北宜昌部分地区的无人机航拍高光谱影像(HSI)和激光雷达(LiDAR)数据作为研究数据源,并对高光谱和LiDAR数据进行融合,最后采用结合注意力模块(CBAM)的卷积神经网络(CNN)方法,对融合后的数据进行滑坡信息提取。研究表明,利用高光谱和雷达数据的优势,可以更准确地提取滑坡信息。     

用水量对胶凝砂砾石抗压强度的影响

胶凝砂砾石材料是一新型筑坝材料,拥有广阔的发展前景。用水量是影响胶凝砂砾石强度的重要因素。通过抗压强度试验分析用水量对胶凝砂砾石抗压强度的影响,得出:最优用水量随胶凝材料掺量的增大而增大,随砂率的增大而增大,最优用水量为85~125 kg/m~3;最优水胶比随胶凝材料用量的增加而减小,随龄期的增加呈减小的趋势,最优水胶比为0.95~1.35。用水量对抗压强度的影响仅次于水泥用量,在施工过程中,应将其作为胶凝砂砾石材料的一项重要参数来控制,以保证胶凝砂砾石材料的性能。     

Modeling electric vehicle’s following behavior and numerical tests

The micro modeling for electric vehicle and its solution were investigated. A new car-following model for electric vehicle was proposed based on the existing car-following models. The impacts of the electric vehicle＇s charging electricity were studied from the numerical perspective. The numerical results show that the electric vehicle＇s charging electricity will destroy the stability of uniform flow and produce some prominent queues and these traffic phenomena are directly related to the initial headway, the distance between two adjacent charging stations and the number of charging stations. The above results can help traffic engineer to choose the position of charging station and the electric vehicle＇s driver to adjust his/her driving behavior in the traffic system with charging station.     

应用于高侧开关感性负载退磁的负压箝位电路

高侧开关作为在以飞机、船舶、车辆为代表的应用领域中控制电动机、继电器、照明等机电、环控系统的关键器件,其负载常呈感性.针对高侧开关关断时感性负载产生的反向电压可能会损坏高侧开关的问题,提出并设计了一种负电压箝位技术.通过理论分析得到了高侧开关关断时的工作原理,为高侧开关的设计提供了参考.芯片采用CSMC 1μm工艺实现,己流片.测试结果显示,负压箝位电路可将高侧开关的漏源电压控制在64V以内,可有效地保护高侧开关.     

火电厂电气闭锁回路配置及实际应用

通过明确断路器、隔离开关、接地刀闸的电气闭锁逻辑,分析了电气闭锁在现场的实际应用,避免了配置电气闭锁时思路不清晰或经验不足导致的配置错误及误操作,对电气人员理解及配置电气闭锁回路具有参考作用.     

K4104合金渗Al涂层抗高温氧化性能研究

采用料浆法在K4104合金表面进行热扩散渗铝,经1000℃×200h高温氧化性试验,用扫描电镜观察氧化后涂层的表面形貌。结果表明,渗Al涂层在氧化过程中已转变成连续致密的-αAl2O3氧化层和富铝的-βNiAl化合物层,使基体合金得到有效地保护,渗Al涂层具有良好的抗高温氧化性能。     

直列六拐曲轴轴承负荷的分析

通过发动机动力学仿真分析软件GT-SUITE/Crank模块对曲柄连杆机构进行动力学仿真分析.并计算了轴心轨迹和轴承负荷,为了减少轴承的负荷,分别采用了对曲柄臂施加四平衡块和八平衡块两种平衡方案,并给出了两种方案的对比.     

VC-WC-Fe基表面复合材料的显微组织研究

应用SEM和XRD研究了原位生成VC陶瓷颗粒及外加WC陶瓷颗粒增强Fe基表面复合材料的显微组织。结果表明，VC和WC能根据各自的含量相互固溶，这对增强相与基体的结合强度会产生有益的影响，将能明显提高表面层的抗冲击性和耐磨性。     

Research of novel oscillating wire feeding system using the AC servo motor

With the background of the control of additional mechanical force droplet transfer in MIG/MAG welding, regarding the AC servo motor as core, a novel oscillating wire feeding system has been developed with excellent performances of control and dynamic acceleration which is tested. System constitution and operation principle are introduced in this paper. Influences of parameters on dynamic acceleration performance are analyzed and discussed emphatically, such as oscillating frequency, oscillating amplitude and draw-back speed. Experimental result indicates that according to the technique of welding control, the novel wire feeding system responds rapidly to various kinds of control orders of wire feeding and draw-back, and realizes flexible control of welding wire axial movement, including dynamic shifting ,oscillating and so on.     

直列六缸柴油机曲轴平衡性分析

在外部平衡性良好的曲轴上加装平衡重,通常是为了减小曲轴所受弯矩,但是平衡重的安装将影响主轴承载荷的大小和分布,平衡重的施加还影响曲轴的内弯矩.本文分别采用了对曲柄臂施加四平衡重和八平衡重两种平衡方案进行对比.