一种大功率相控整流触发电路

分析了一种以PUT(程控单结晶体管)为核心的新型晶闸管相控整流触发电路的工作原理,该触发电路适用于六相半波整流,提高了变压器的使用效率。详细说明了其与传统单结晶体管触发电路相比的优点以及与数字集成触发电路相比的经济性。采用此种触发电路具有性能可靠、电路结构简单、性价比高的优点,特别适宜于低电压、大电流的工作场合,如电镀电解和大功率弧焊电源。     

有机过渡金属络合物均相催化发展及展望

介绍了国内外均相络合催化的研究及发展,并对均相络合催化的发展方向进行了展望。     

高温高含硫变换气应用渗铝钢管道的研究与应用

煤气化过程中变换气输送常采用不锈钢管道,由于高温含硫介质及高残余应力的共同作用,管道易产生应力腐蚀而导致开裂破坏。现采用表面含金化处理的渗铝钢管,并研究解决了其焊接等关键问题,经三年多运行证明,该技术是成功的。     

Microstructure and properties of cutting magnesium-brass containing no lead

1 INTRODUCTIONLead-brass has excellent cutting ability , me-chanical and physical properties and is one of themost widely used copper alloys . The occupationratio of brass tube to all kinds of tubes reaches90 % in developed countries . The cutting lead-brass is a dual-phase brass and fine lead particlesdistribute dispersivelyin grains and on grain boun-ries . Theleadin wasted brass can easily beleachedand dissolvedinto soil .If the wasted lead-brass isburned in air ,the lead will become p…     

实型铸造大件的应用及新发展

众所周知，实型铸造生产中采用聚苯乙烯泡塑模样，应用呋喃树脂白硬砂造型。当金属液浇入铸型时，泡沫塑料模样在高温金属液作用下迅速气化，燃烧而消失，金属液取代了原来泡沫塑料所占据的位置，冷却凝固成与模样形状相同的实型铸件。     

Electrochemical properties of CeMgu Ni＋x% Ni composites （x=0, 50, 100 and 200） prepared by ball-milling

The electrochemical properties of the as-cast CeMg11 Ni and ball-milled CeMg11 Ni x%Ni(x=0, 50,100 and 200, mass fraction) composites were investigated. The results show that homogeneous amorphous phase of CeMg11 Ni x% Ni composite can be obtained by ball-milling, and discharge capacity of the ball-milled CeMg11 Ni x% Ni composites differs greatly depending on the amount of Ni introduced during milling. The CeMg11 Ni 200% Ni composite after 90 h ball-milling was found to exhibit a large discharge capacity of about 1 012 mAh/g at 303 K,and it also shows better charge-discharge cycling stability than those with lower Ni content. This remarkable improvement in electrochemical properties of the ball-milled composites seems to be attributed to the formation of an amorphous composite as well as the improvement of the surface state of the ball-milled particles.     

基于Cimatron的数控加工技术在运动鞋模具制造中的应用

介绍了利用Cimatron软件编制运动鞋TPR数控加工程序的过程。分析了该软件在CAM应用这方面的特点及优点。     

基于ArcSWAT2009的锦江流域径流模拟分析

基于ArcGis10.0建立了锦江流域数据库,将ArcSWAT2009模型应用于锦江流域的径流模拟。采用LH-OAT灵敏度分析方法进行参数灵敏度分析,得出模型灵敏参数序列,并利用4个水文站(危坊、宜丰、上高、高安)2001~2008年径流观测数据对SWAT模型进行参数率定。模型适用性评价结果表明:校准期和验证期年均值相对误差(Re)小于20%,月相关系数(R2)和月效率系数(NSE)均大于0.7,拟合精度较高,SWAT模型适宜锦江流域的径流模拟。