NiaSi2O5（OH）4 Multi-Walled Nanotubes with Tunable Magnetic Properties and Their Application as Anode Materials for Lithium Batteries

Highly crystalline and thermally stable pure multi-walled Ni₃Si₂O₅(OH)₄ nanotubes with a layered structure have been synthesized in water at a relatively low temperature of 200–210 °C using a facile and simple method. The nickel ions between the layers could be reduced in situ to form size-tunable Ni nanocrystals, which endowed these nanotubes with tunable magnetic properties. Additionally, when used as the anode material in a lithium ion battery, the layered structure of the Ni₃Si₂O₅(OH)₄ nanotubes provided favorable transport kinetics for lithium ions and the discharge capacity reached 226.7 mA·h·g⁻¹ after 21 cycles at a rate of 20 mA·g⁻¹. Furthermore, after the nanotubes were calcined (600 °C, 4 h) or reduced (180 °C, 10 h), the corresponding discharge capacities increased to 277.2 mA·h·g⁻¹ and 308.5 mA·h·g⁻¹, respectively.      

DJG-1阳离子絮凝剂合成的影响因素

DJG-1阳离子絮凝剂的合成步骤为：玉米淀粉与丙烯酰胺在硝酸铈铵引发下接枝，得A；A与醇在酸催化下发生酯化反应得B；甲醛与二甲胺反应得N-羟甲基胺（C）；在C中加入酸使pH值为4左右。得酸性范围内的N-羟甲基胺（C′）。B与C′发生曼尼希反应得D（叔胺盐）；D发生烷基化反应E（季铵盐）；E与四苯硼钠反应生成白色沉淀。室内试验分析了DJG-1阳离子絮凝剂合成的影响因素。评价了DJG-1的水处理效果并与硫酸铝进行了对比。实验结果表明，DJG-1阳离子絮凝剂合成的影响因素包括引发剂的选用，活化时间，投料比，反应时间与温度及溶液pH值等。用DJG-1絮凝剂混凝处理钻井废水时，絮凝沉淀的速度比用硫酸铝处理时大得多，废水处理效率高，但DJG-1絮凝剂与硫酸铝复合使用经济效益更好，且硫酸铝用量为300mg/L时，DJG-1的最佳用量为3-4mg/L。     

焙烧方法对CO2-O2联合重整甲烷用Ni/ZrO2催化剂性能的影响

采用溶胶-凝胶法制备了ZrO2载体,应用静态空气、流动空气、流动氮气、流动空气一静态空气焙烧方法处理载体粒子,采用浸渍法制备了上述载体的负载型Ni/ZrO2催化剂,考察了焙烧方法、焙烧温度对Ni/Zr02催化剂性能的影响.结果表明,采用流动氮气500℃焙烧载体,制得的Ni/ZrO2催化剂孔径小,比表面积较大;采用流动氮气800℃焙烧载体,制得的Ni/ZrO2催化剂在联合重整甲烷反应中甲烷转化率高于90%.