A Review of Dynamic Fracture Studies in Functionally Graded Materials

Abstract:  This article presents a review of dynamic fracture studies on functionally graded materials. A brief literature review on the fracture mechanics of graded materials is presented first. This is followed by a discussion on the higher-order asymptotic analysis of the transient elastic field surrounding the tip of a dynamically growing crack in a functionally graded material. A comprehensive experimental study of dynamic crack growth in model functionally graded material using the optical method of reflection photoelasticity and high-speed photography is then presented. The results are analysed to establish a generalised relationship between the crack velocity and the dynamic mode-I stress intensity factor (SIF). This relationship is found to be unique and is distinctly different from that previously established for the matrix material (polyester). Finally, an innovative experimental procedure is used to demonstrate the necessity of employing a fully transient stress-field representation in the analysis of optical data for an accurate prediction of the dynamic SIF history.     

A parallel technique for signal-level perceptual organization

Due to the potential for essentially unbounded scene complexity, it is often necessary to translate the sensor-derived signals into richer symbolic representations. A key initial stage in this abstraction process is signal-level perceptual organization (SLPO) involving the processes of partitioning and identification. A parallel SLPO algorithm that follows the global hypothesis testing paradigm, but breaks the iterative structure of conventional region growing through the use of α-partitioning and region filtering is presented. These two techniques segment an image such that the gray-level variation within each region can be described by a regression model. Experimental results demonstrate the effectiveness of this algorithm     

集成模拟和实际测试带来更短的设计周期和更高质量的产品

尽管模拟和测试在产品开发过程中扮演着相似的角色,但到目前为止功能上的互补并未臻完整.它们存在于各自相对隔绝的环境中(一个处于实际环境中,另一个则处于虚拟环境中),彼此的结果不能互用,在许多情况下甚至不相信彼此的结果.……     

Evaluation of solid-desiccant-based evaporative cooling cycles for typical hot and humid climates

This paper presents an evaluation of various solid desiccant cycles for air conditioning in hot and humid climates. Psychometric evaluation of potential cycles for 16 typical Indian cities has been carried out with the objective of achieving standard comfort conditions in the room. Computer simulation is based on constant effectiveness of heat exchangers and evaporative coolers and actual performance data of a commercially available desiccant wheel dehumidifier. The influence of various outdoor conditions, the effectiveness of heat exchangers/evaporative coolers on the cooling coefficient of performance and volumetric air flowrate per unit cooling capacity have been investigated. It is found that amongst ventilation, recirculation and Dunkle cycles, the Dunkle cycle is better for a wide range of outdoor conditions. However, cycles using wet surface heat exchangers give even higher performance.     

Efficient dissemination of personalized information using content-based multicast

There has been a surge of interest in the delivery of personalized information to users (e.g., personalized stocks or travel information), particularly as mobile users with limited terminal device capabilities increasingly desire updated and targeted information in real time. When the number of information recipients is large and there is sufficient commonality in their interests, as is often the case, IP multicast is an efficient way of delivering the information. However, IP multicast services do not consider the structure and semantics of the information in the multicast process. We propose the use of Content-Based Multicast (CBM) where extra content filtering is performed at the interior nodes of the IP multicast tree; this will reduce network bandwidth usage and delivery delay, as well as the computation required at the sources and sinks. We evaluate the situations in which CBM is advantageous. The benefits of CBM depend critically upon how well filters are placed at interior nodes of the IP multicast tree and the costs depend upon those introduced by filters themselves. Further, we consider the benefits of allowing the filters to be mobile so as to respond to user mobility or changes in user interests and the corresponding costs of filter mobility. The criterion that we consider is the total network bandwidth utilization. For this criterion, we develop an optimal filter placement algorithm, as well as a heuristic that executes faster than the optimal algorithm. We evaluate the algorithms by means of simulation experiments. Our results indicate that filters can be effective in substantially reducing bandwidth. We also find filter mobility is worthwhile if there is marked large-scale user mobility. We conclude with suggestions for further work.     

A radix-8 wafer scale FFT processor

Wafer Scale Integration promises radical improvements in the performance of digital signal processing systems. This paper describes the design of a radix-8 systolic (pipeline) fast Fourier transform processor for implementation with wafer scale integration. By the use of the radix-8 FFT butterfly wafer that is currently under development, continuous data rates of 160 MSPS are anticipated for FFTs of up to 4096 points with 16-bit fixed point data.     

Transcutaneous balloon angioplasty in the treatment of subclavian steal syndrome. Characteristics of vertebral basal flow with transcranial Doppler technique

Subclavian steal syndrome (SSS) appears when the origin of the subclavian artery (SA) is occluded or stenosed. Introduction of transcranial Doppler sonography (TCD) provided an opportunity to evaluate parameters of the blood flow in the vertebral (VA) and basilar artery (BA). Measurements of blood flow velocities performed at rest and after the brachial hyperemia test allow one to classify hemodynamic types of SSS. The aim of the study was to categorize types of steal and to compare the differences of flow patterns before and after percutaneous transluminal SA balloon angioplasty (SA-PTA). Fourty-eight patients with angiographically confirmed SSS (aged from 27 to 68 years, mean 53; 2/1 f/m ratio) were examined with 2 MHz range-gated, pulsed transcranial Doppler device (TC 2-64B EME). Both VA and BA were evaluated by the transoccipital approach at rest and during the brachial hyperemia. In 5 cases (10.4%) permanent reversal blood flow in the BA was observed (complete basilar steal). In flow in the BA blood flow was in the normal direction at rest and altered (reversed or decreased) when induced with brachial hyperemia test (transient basilar steal). In the next 14 patients (29.2%) permanently reversed VA blood flow was observed with only a slight or no alterations of the BA flow after the hyperemia test (complete vertebral steal). In the last 19 cases (39.6%) alterations of the VA blood flow without changes in BA flow were observed (latent vertebral steal). Between 1991 and 1994 twenty seven symptomatic patients with different hemodynamic types of SSS were treated with SA-PTA. TCD evaluation of VA's and BA using the hyperemia test was performed before, 3 to 7 days and 3 months after morphologically and hemodynamically successful subclavian artery balloon PTA. Normal results of vertebrobasilar examinations were obtained in 26 cases after this procedure. In one case the latent vertebral steal was detected. The 28 months mean follow-up revealed no significant changes in TCD flow patterns recorded from VA's and BA. After collecting data of about 60 patients with SSS we examined with TCD we conclude that: in patients with a hemodynamically significant SA stenosis the presence of reversed ipsilateral VA blood flow (a radiologic steal) its not a good determinant of either the presence or type of presenting symptoms and after successful PTA or recanalisation and PTA of SA in almost all cases we examined close to normal TCD recordings in BA and VA.     

Change of foot size with weightbearing. A study of 2829 children 3 to 18 years of age

The change of foot length and width with age has been reported in a few anthropometric studies in the literature. However, the relationship with body height rarely is reported, and the dynamic effect of weightbearing on foot size has not been documented. In this series, 2829 children 3 to 18 years of age of equal gender distribution were included in the study. The foot length and width on weightbearing and nonweightbearing were measured with a special precision electronic caliper. The foot length and width were found to increase linearly from the age of 3 years until 12 years in girls and 15 years in boys. This was followed by a phase during which the increase plateaued. The foot length and width increased significantly on weightbearing at all ages in both genders with a mean of 2.1 to 4.4 mm or 3.1% to 4.8%, respectively. The foot length and width also were found to correlate significantly with the body height in both genders, with a correlation coefficient of 0.96 to 0.98. No significant differences were found between the sizes of the dominant and nondominant foot in either gender.     

A retrograde fluorescent-labeling study of direct relationship between the limbic (anterodorsal and anteroventral thalamic nuclei) and the visual system in the albino rat

Case-control methodology was used to assess lung cancer risk from exposure to arsenic in air, employing data from former workers in different units at the Chuquicamata copper mine and smelter complex. Thirty two workers from this complex were identified among the lung cancer deaths that occurred in the Northern region of Chile between 1987 and 1991. Each case was matched on age and sex, with controls that had a similar date of enrolment in the company. Available data on arsenic concentrations in air for six work sites were compiled from 1952 to 1991 and these were used to categorize the workplaces: Administrative area (1.6 micrograms/m3), Mine (2.3 micrograms/m3), Oxid Plant (3.1 micrograms/m3), Workshop and Services (9.8 micrograms/m3), Sulphur Plant (8.4 micrograms/m3) and Smelter (201.7 micrograms/m3). The results indicate an Odds Ratio of 5.7 (Fisher's p = 0.016) of dying from lung cancer among workers of the smelter compared with the rest of the workers.