The Rheological Properties of Lube Oil With Terpolymeric Additives

Twelve terpolymeric additives were prepared via free radical chain addition polymerization. The rheological properties of lube oil (SAE-30) were studied with and without additives. The prepared terpolymers have a good effect on the viscosity-temperature relationship. The flow curves and viscosity-shear rate curves of the prepared additives doped with lube oil were studied and it was found that they behave as Bingham fluids. The sensitivity of the prepared terpolymers to mechanical stresses was studied and it was found that the sensitivity increases with increasing the molecular weight of the prepared additives.     

Groundwater Exploration and Assessment in Rural Communities of Yobe State, Northern Nigeria

The provision of adequate water supply and sanitation to the rapidly growing urban populations is increasingly becoming a problem for governments throughout the world. The continuing expansion of the numbers of people in cities who need water and sanitation services form a continuous pressure to either invest in additional production capacity or to stretch the available supplies to serve more people. Due to rapid increase in population growth in the Yobe State north of Nigeria, there is a shortage in the water supply to Damaturu city the capital of the state and surrounding villages. At the present the total water supply is about 10,000 m³/day abstracted form the shallow alluvial groundwater aquifer using 29 production wells. Due to the expected increase in water demand and the limited potentiality of shallow aquifer system, other deep aquifers were explored and investigated to evaluate their potentiality for future water demand. Vertical Electrical Sounding Method was used for the geophysical survey of the study area. Groundwater flow model was developed and calibrated against the historical information. Three wellfields were designed to provide Damaturu city and surrounding villages with the required water. The calibrated model has been used to evaluate the aquifer potentiality and the effect of future withdrawals on the deep aquifer system. It was found that the aquifer system within the study area consists of two main layers. The upper layer is the Chad formation comprises an alluvial sand and gravel with intercalation of thin sility clay layers. The second layer is Keri-Keri formation consists of sandstone formation which is not explored before. During this study the Kerri-Kerri aquifer system was investigated as an alternative source for groundwater for future demand. The study presents an integrated groundwater resources management strategy for present and future water supply for rural communities.     

Novel fire-retardant bagasse papers using talc/cyclodiphosphazane and nanocellulose as packaging materials

This paper aimed to modify the ignitability of the bagasse paper by using talc powder, 1,3-di-aniline-2,2,2,4,4,4-hexachlorocyclodiphosph(V)azane, and nanocellulose crystal. The formation of cellulose nanocrystals (CNCs) was detected using transmission electron microscopy (TEM), X-ray diffraction (XRD). Thermal analysis as thermal gravimetric analysis (TGA) of the specimens recorded the improvement of the highest % of ash residue at 750 °C compared to the untreated one. The shape of the flame spread was studied. The ignition properties were studied for the untreated and treated specimens by limiting oxygen index (LOI) and flame chamber (UL/94), which recorded enhancing compared to the untreated specimen. This improvement was recorded either by measuring the mechanical properties (tensile strength, burst strength, elongation, and elasticity) of the specimens. The current article showed that the treated specimen was recorded the highest values compared to the untreated one in all physical, mechanical, and ignition properties, so these treatment paper sheets may be used as fire-retardant packaging materials.     

Analysis of Pipe Networks by the Finite Element Method

ABSTRACT

In this paper, the finite element technique used in the analysis and design of water distribution networks will be presented. The method was applied successfully to the solution of three different networks.

In order to demonstrate the feasibility of the approach and to show some merits and demerits of the finite element method, a comparison was made on a digital computer with the standard Hardy Cross method. In all cases the finite element method was shown to provide superior performance.

Moreover, the programmes were run on three different machines [Wang vs 100, Apple IIe, and IBM micro-computer] to show the effect of increasing storage capacity, machine accuracy, and time saving.     

Electrodeposited composite coating of Ni-W-P with nano-sized rod- and spherical-shaped SiC particles

In this research, Ni-W-P-SiC nanocomposite coatings are electrodeposited from the plating solution containing suspension of nano-sized spherical- and rod-shaped SiC particles. The influence of SiC particle charge, applied current density, surfactant addition and the particle shape on the SiC incorporation rate has been studied. The phase structure, microhardness and wear resistance of Ni-W-P-SiC nanocomposite coatings were evaluated using X-ray diffraction (XRD), microhardness tester and wear test apparatus. The surface morphology of the produced coatings and worn surfaces has been investigated using scanning electron microscope (SEM). Additionally, the composite coating exhibited higher hardness and wear resistance than the pure Ni-W-P alloy. Regardless the particle shape, the mechanical characteristics of composite coatings are improved with increasing of SiC wt.% into the matrix. The corrosion behavior of the produced coatings was studied using anodic polarization measurements. The nanocomposite coating incorporating SiC rods exhibited higher mechanical and corrosion performance compared with deposits with spherical SiC nano-particles.     

The fatty acid composition of Hibiscus sabdariffa seed oil

Analysis of Hibiscus sabdariffa seed oil from different seed collections (or cultivars), representing different growing areas, showed differences in the fatty acid pattern, especially with respect to linoleic (30.1-37.45%) and epoxyoleic (trace to 5.3%). The results showed different values from those previously reported for the cyclopropenoid fatty acid, found to be malvalic acid (0.4-2.0%), responsible for the positive Halphen response of the oil. It is now also established that the oil contains dihydrosterculic acid (1.0-1.6%) which has been reported previously in other species of the genus Hibiscus. The results of the rest of fatty acids showed ranges for myristic 0.2-0.5%, palmitic 17.4-22.6%, stearic 3.9-5.2% and oleic acid 34.6-39.8%.     

Optic nerve signals in a neuromorphic chip II: Testing and results

Seeking to match the brain's computational efficiency, we draw inspiration from its neural circuits. To model the four main output (ganglion) cell types found in the retina, we morphed outer and inner retina circuits into a 96 x 60-photoreceptor, 3.5 x 3.3 mm2, 0.35 microm-CMOS chip. Our retinomorphic chip produces spike trains for 3600 ganglion cells (GCs), and consumes 62.7 mW at 45 spikes/s/GC. This chip, which is the first silicon retina to successfully model inner retina circuitry, approaches the spatial density of the retina. We present experimental measurements showing that the chip's subthreshold current-mode circuits realize luminance adaptation, bandpass spatiotemporal filtering, temporal adaptation and contrast gain control. The four different GC outputs produced by our chip encode light onset or offset in a sustained or transient fashion, producing a quadrature-like representation. The retinomorphic chip's circuit design is described in a companion paper [Zaghloul and Boahen (2004)].     

Polarity dependent oxide defects located using liquid crystals

Liquid crystals have been used to study, non-destructively, the localized regions of high conductivity known to be present in thin layers of silicon dioxide grown thermally on n type silicon. The polarity dependence of the turbulence in the liquid crystals, together with the growth in the number of defects with time suggests that mobile impurity ions play an important role.     

From data topology to a modular classifier

This article describes an approach to designing a distributed and modular neural classifier. This approach introduces a new hierarchical clustering that enables one to determine reliable regions in the representation space by exploiting supervised information. A multilayer perceptron is then associated with each of these detected clusters and charged with recognizing elements of the associated cluster while rejecting all others. The obtained global classifier is comprised of a set of cooperating neural networks and completed by a K-nearest neighbor classifier charged with treating elements rejected by all the neural networks. Experimental results for the handwritten digit recognition problem and comparison with neural and statistical nonmodular classifiers are given.Received: 1 October 2002, Accepted: 21 November 2002, Published online: 6 June 2003     

Some Physical Properties of CuTlSe Alloy

The structure and optical properties of Cu0.1Tl2Se3 alloy was studied. X-ray analysis showed that the polycrystalline powder consists of a mixture of two phases Cu3TlSe2 (monoclinic) and TlSe (tetragonal). Chalcopyrite phase CuTlSe2 can be obtained by annealing the powder at 250 ℃ for 1 h. Thin film with a monoclinic phase of Cu3TlSe2 was obtained for the thick film (0.7 mum). The optical parameters alpha, n, k, epsilon' and epsilon " and the energy gap were calculated. The thermoelectric power measurements showed that S has a positive polarity over the whole range of temperature.