On tool wear and its effect on machined surface integrity

This paper presents the results of an investigation of induced residual stress, induced strain, and induced subsurface energy in machined surfaces due to the machining process. The influence of tool wear on residual stress, strain, and energy is also reported. The exact elasticity solution for a split ring was extended and used to calculate the residual stress in the machined surface by using ring dimension changes caused by the electrochemical removal of a thin layer of residually stressed surface. The strain distribution beneath the machined surface was determined by using the grid technique. The subsurface energy stored in the machined surface was then obtained from the data of residual stress and strain. For the materials studied, this investigation showed that such energy could not be neglected when establishing the total energy needed for machining a unit volume of material. Tool coatings having different surface roughness and tools having various magnitudes of flank wear were investigated. The experimental results show that tool wear is a dominant factor affecting the values of induced residual stress, strain, subsurface energy, and the quality of the machined surface. The increase of tool wear caused an increase of residual stress and strain beneath the machined surface. It was also found that the overall energy stored in the machined subsurface increases as the tool wear increases and as the tool surface gets rougher. When the cutting tool is severely worn, the machined surface not only becomes very rough, but also contains many partially fractured laps or cracks. This makes tool wear a key factor in controlling the quality of the machined surface.     

Design of a printed log‐periodic dipole array antenna with high gain for millimeter‐wave applications

In this article, a V‐band printed log‐periodic dipole array (PLPDA) antenna with high gain is proposed. The antenna prototype is designed, simulated, fabricated, and tested. Simulation results show that this antenna can operate from 42 to 82 GHz with a fractional impedance bandwidth of 64.5% covering the whole V‐band (50–75 GHz). The antenna has a measured impedance matching bandwidth that starts from 42 to beyond 65 GHz with good agreement between the experimental and simulated results. At 50 and 65 GHz, the antenna has a measured gain of 10.45 and 10.28 dBi, respectively, with a gain variation of 2.6 dBi across the measured frequency range. The antenna prototype exhibits also stable radiation patterns over the operating band. It achieves side‐lobe suppression better than 17.26 dB in the H‐plane and better than 8.95 dB in the E‐plane, respectively. In addition, the cross‐polarization component is 18.5 dB lower than the copolarization with front‐to‐back ratio lower than 24.1 dB in both E‐ and H‐planes across the desired frequency range. Based on a comparison of performance among the reported work in the literature, we can say that the proposed PLPDA antenna is a proper candidate to be used in many applications at V‐band frequency. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:185–193, 2015.     

A generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates based on isogeometric analysis

This paper presents a generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates. We exploit a higher-order shear deformation theory in each layer such that the continuity of the displacement and transverse shear stresses at the layer interfaces is ensured. Thanks for enforcing the continuity of the displacement and transverse shear stresses at an inner-laminar layer, the minimum number of variables is retained from the present theory in comparison with other layerwise theories. The method requires only five variables, the same as what obtained from the first- and higher-order shear deformation theories. In comparison with the shear deformation theories based on the equivalent single layer, the present theory is capable of producing a higher accuracy for inner-laminar layer shear stresses. The free boundary conditions of transverse shear stresses at the top and bottom surfaces of the plate are fulfilled without any shear correction factors. The discrete system equations are derived from the Galerkin weak form, and the solution is obtained by isogeometric analysis (IGA). The discrete form requires the C¹ continuity of the transverse displacement, and hence NURBS basis functions in IGA naturally ensure this condition. The laminated composite and sandwich plates with various geometries, aspect ratios, stiffness ratios and boundary conditions are studied. The obtained results are compared with the 3D elasticity solution, the analytical as well as numerical solutions based on various plate theories.     

Different Estimation Methods for Constant Stress Accelerated Life Test under the Family of the Exponentiated Distributions

The Accelerated Life Testing (ALT) has been used for a long time in several fields to obtain information on the reliability of product components and materials under operating conditions in a much shorter time. One of the main purposes of applying ALT is to estimate the failure time functions and reliability performance under normal conditions. This paper concentrates on the estimation procedures under ALT and how to select the best estimation method that gives accurate estimates for the reliability function. For this purpose, different estimation methods are used, such as maximum likelihood, least squares (LS), weighted LS, and probability weighted moment. Moreover, the reliability function under usual conditions is predicted. The estimation procedures are applied under the family of the exponentiated distributions in general, and for the exponentiated inverted Weibull (EIW) as a special case. Numerical analysis including simulated data and a real life data set is conducted to compare the performances between these four methods. It is found that the ML method gives the best results among other estimation methods. Finally, a comparison between the EIW and the Inverted Weibull (IW) distributions based on a real life data set is made using a likelihood ratio test. It is observed that the EIW distribution can provide better fitting than the IW in case of ALT. Copyright © 2015 John Wiley & Sons, Ltd.     

Data envelopment analysis with classification and regression tree – a case of banking efficiency

Abstract: Data envelopment analysis (DEA) is a non‐parametric method for measuring the efficiency and productivity of decision‐making units (DMUs). On the other hand data mining techniques allow DMUs to explore and discover meaningful, previously hidden information from large databases. Classification and regression (C&R) is the commonly used decision tree in data mining. DEA determines the efficiency scores but cannot give details of factors related to inefficiency, especially if these factors are in the form of non‐numeric variables such as operational style in the banking sector. This paper proposes a framework to combine DEA with C&R for assessing the efficiency and productivity of DMUs. The result of the combined model is a set of rules that can be used by policy makers to discover reasons behind efficient and inefficient DMUs. As a case study, we use the proposed methodology to investigate factors associated with the efficiency of the banking sector in the Gulf Cooperation Council countries.     

Analysis of Pipe Networks by the Finite Element Method

ABSTRACT

In this paper, the finite element technique used in the analysis and design of water distribution networks will be presented. The method was applied successfully to the solution of three different networks.

In order to demonstrate the feasibility of the approach and to show some merits and demerits of the finite element method, a comparison was made on a digital computer with the standard Hardy Cross method. In all cases the finite element method was shown to provide superior performance.

Moreover, the programmes were run on three different machines [Wang vs 100, Apple IIe, and IBM micro-computer] to show the effect of increasing storage capacity, machine accuracy, and time saving.     

Non-Gaussian Model for Ringing Phenomena in Offshore Structures

Significant interest has been shown in identifying the nonlinear mechanisms that induce a ringing type response in offshore structural systems. This high frequency transient type response has been observed in offshore systems, particularly in tension leg platforms (TLPs). Given the implications of this behavior on the fatigue life of TLP tendons, it is essential that ringing be considered in the overall response evaluation. This study presents two non-Gaussian probabilistic models of nonlinear viscous hydrodynamic wave forces that induce ringing. The response of a single-degree-of-freedom system exposed to these non-Gaussian wave force models is then evaluated using analytical and numerical studies based on the It? differentiation rule and the Monte Carlo simulation procedure, respectively. The results demonstrate that the proposed models induce ringing type response in a simplified structure. This study provides a probabilistic framework for modeling ringing type phenomenon which will serve as a building block for more refined hydrodynamic load models.     

Electrospun Azithromycin-Laden Gelatin Methacryloyl Fibers for Endodontic Infection Control

This study was aimed at engineering photocrosslinkable azithromycin (AZ)-laden gelatin methacryloyl fibers via electrospinning to serve as a localized and biodegradable drug delivery system for endodontic infection control. AZ at three distinct amounts was mixed with solubilized gelatin methacryloyl and the photoinitiator to obtain the following fibers: GelMA+5%AZ, GelMA+10%AZ, and GelMA+15%AZ. Fiber morphology, diameter, AZ incorporation, mechanical properties, degradation profile, and antimicrobial action against Aggregatibacter actinomycetemcomitans and Actinomyces naeslundii were also studied. In vitro compatibility with human-derived dental pulp stem cells and inflammatory response in vivo using a subcutaneous rat model were also determined. A bead-free fibrous microstructure with interconnected pores was observed for all groups. GelMA and GelMA+10%AZ had the highest fiber diameter means. The tensile strength of the GelMA-based fibers was reduced upon AZ addition. A similar pattern was observed for the degradation profile in vitro. GelMA+15%AZ fibers led to the highest bacterial inhibition. The presence of AZ, regardless of the concentration, did not pose significant toxicity. In vivo findings indicated higher blood vessel formation, mild inflammation, and mature and thick well-oriented collagen fibers interweaving with the engineered fibers. Altogether, AZ-laden photocrosslinkable GelMA fibers had adequate mechanical and degradation properties, with 15%AZ displaying significant antimicrobial activity without compromising biocompatibility.     

Infrared Spectra of Nitrated Polymeric Carbohydrates

Nitrated Polymeric carbohydrates are not very pure when used, as their physical constants are neither sharp nor unique for positive identification purposes. The ingredients of explosives are so numerous and it was considered beyond the scope of this investigation to include them.     

Eco-friendly food products as source of natural colorant for wool yarn dyeing

ABSTRACT

Food products as a source of natural colorants are gaining widespread popularity around the globe due to their ayurvedic and eco-friendly nature. Current study is aimed with the utilization of food products (Saffron and madder) as a source of dye for woolen yarn. It is found that, for Saffron, irradiation of yarn for 6 min gives high color strength by dyeing for 45 min in the presence of 2% of salts using un-irradiated dye bath of 1 pH, whereas for madder, 4 min is optimal irradiation time for extract to dye irradiated yarn for 25 min in the presence of 6% of salts using the irradiated dye bath of pH 1. The mordanting carried out at optimal conditions show that using both extracts, woolen yarn dyed at optimal conditions has given good color characteristics. It is concluded that microwave radiation has not only improved natural dyeing process but also make the process more eco-friendly and sustainable as well.