Electrical double-layer capacitors: evaluation of ageing phenomena during cycle life testing

This paper represents an assessment of the main ageing phenomena in electrical double-layer capacitors (EDLCs). In this study the cycle life of the EDLC cells with a rated capacitance of 1,600 F has been investigated at different ambient temperatures and current rates. From the experimental results we can observe that the impact of the high ambient temperature is significant on the cycle life of the cells. Moreover, the results also show the negative impact of the current rate. The internal resistance tests showed that the increase of the resistance is much higher than the decrease of the capacitance. Thus, the ageing of the EDLC during cycling was clearly non-linear. Further the EIS measurements indicated the higher increase of the imaginary part of the impedance at low frequencies during cycling, which indicates the capacitance fade.     

Yielding behaviour of thermoplastic/elastomer blends cured by gamma irradiation

Mechanical blends of thermoplastic medium density polyethylene (MDPE) and elastomeric ethylene propylene diene monomer (EPDM) have been prepared with a fixed composition of 60/40 wt%. They have been used either in their gum form or loaded with two different reinforcing fillers, high abrasion furnace (HAF) carbon black or precipitated SiO₂ (Hi Sil) of concentration 25–100 phr (parts per hundred parts of resin) with respect to the blend. Curing was achieved by gamma irradiation. Yielding properties (yield stress, yield strain and cold drawing) have been followed as a function of irradiation dose for different blend compositions. Yield stress values increased with irradiation dose and with the content of the reinforcing filler, but yield strain and cold drawing values decreased with irradiation dose and also with the filler content. The data obtained reveal that Hi Sil is more effective as a reinforcing filler, and the prepared blends are suitable for load‐bearing applications. © 2001 Society of Chemical Industry     

Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

Effectiveness of some diquaternary ammonium surfactants as corrosion inhibitors for carbon steel in 0.5 M HCl solution

Four Gemini surfactants were synthesized and characterized using elemental analysis, FTIR and ¹H NMR spectroscopy. The synthesized compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution. The inhibition efficiencies of the tested inhibitors were depended on the hydrophobic chain length and the used doses of the inhibitors. The polarization measurements showed that these inhibitors are acting as mixed inhibitors for both anodic and cathodic reactions. The results showed that the inhibition efficiencies were increased by increasing the inhibitor doses and the hydrophobic chain length and reached the maximum at 500 ppm by weight for stearyl derivative. The efficiencies obtained from the impedance measurements were in good agreement with those obtained from the gravimetrical and polarization techniques which prove the validity of these tolls in the measurements of the tested inhibitors.     

Microstructure and phase composition of cordierite-based co-clinker

The aim of this work is to study the effect of phase composition and microstructure of cordierite-based co-clinkers on the electrical properties and coefficient of thermal expansion of cordierite briquettes. To achieve this aim talc and kaolinite samples were collected from quarries in the Egyptian desert. The samples are characterized using XRD, XRF, polarized light, cathodoluminescence and SEM microscopy attached with EDAX, in addition to X-ray micro-computed tomography (3D- µXCT). The electrical properties and coefficient of thermal expansion of the cordierite briquettes are determined using HiTESTER instrument and automatic Netzsch DIL402 PC dilatometer, respectively.Five talc-based batches were shaped and fired in the temperature range 1000–1350 °C for 2 h. The microstructural and physical characteristics of the resulted cordierite-based co-clinkers depend mainly on the viscosity of the liquid phase developed during firing. The microchemistry of the cordierite briquettes confirms their enrichment of both cordierite and ferroan-cordierite crystallized directly from locally developed melts. The dielectric constant and loss factor values for cordierite briquettes allow their possible use as insulator components in electronic applications.     

Muscle tissue structural changes and texture development in sea bream, Sparus aurata L., during post-mortem storage

Sea bream, Sparus aurata L., specimens were studied in pre-rigor (3 h) and during the following post-mortem days: 1, 5, 10, 15 and 22. Muscle and textural parameters were evaluated on 6 specimens/stage. Structural results showed scarce fibre-to-fibre detachment on pre-rigor, which increased during the post-mortem degradation. Ultrastructural changes revealed rapid muscle degradation. In pre-rigor myofibrils were detached to both sarcolemma and endomysium. Intermyofibrillar spaces increased and some mitochondriae and sarcoplasmic reticulum were swollen. After 1 day, the sarcolemma appeared occasionally disrupted and the interfibrillar spaces increased. From 5 to 10 days, the I-band and Z line presented some alterations, although these were more severe at 15-22 days. Thus, in these two last stages, loss of I-band, Z line and actin filaments was observed, that coincides with the alteration of the hexagonal arrangement in these advanced stages. Also, the fragmentation of myofibrils increased from 5 to 10 days on. Sarcolemma and endomysium were gradually disrupted throughout the post-mortem stages with total loss at 22 days. Consequently, the interfibrillar spaces increased at last stages. Autophagic mechanisms increased from 5 days on, with an intense destruction of all the intracytoplasmic organelles. Textural parameters decreased from pre-rigor until 5-10 days, mainly associated to detachment of myofibers to sarcolemma-endomysium.     

Electrodeposited composite coating of Ni-W-P with nano-sized rod- and spherical-shaped SiC particles

In this research, Ni-W-P-SiC nanocomposite coatings are electrodeposited from the plating solution containing suspension of nano-sized spherical- and rod-shaped SiC particles. The influence of SiC particle charge, applied current density, surfactant addition and the particle shape on the SiC incorporation rate has been studied. The phase structure, microhardness and wear resistance of Ni-W-P-SiC nanocomposite coatings were evaluated using X-ray diffraction (XRD), microhardness tester and wear test apparatus. The surface morphology of the produced coatings and worn surfaces has been investigated using scanning electron microscope (SEM). Additionally, the composite coating exhibited higher hardness and wear resistance than the pure Ni-W-P alloy. Regardless the particle shape, the mechanical characteristics of composite coatings are improved with increasing of SiC wt.% into the matrix. The corrosion behavior of the produced coatings was studied using anodic polarization measurements. The nanocomposite coating incorporating SiC rods exhibited higher mechanical and corrosion performance compared with deposits with spherical SiC nano-particles.     

Scalable and fault‐tolerant key agreement protocol for dynamic groups

With the widespread use of the Internet, the popularity of group communication‐based applications has grown considerably. Since most communications over the Internet involve the traversal of insecure networks, basic security services are necessary for these collaborative applications. These security services can be facilitated if the authorized group members share a common secret. In such distributed applications, key agreement protocols are preferred to key distribution protocols. In the past two decades, there have been many proposals for key agreement protocols. Most of these protocols are not efficient and limit the size of the underlying group. In this paper, we consider the scalability problem in group key agreement protocols. We propose a novel framework based on extension of the Diffie–Hellman key exchange protocol. The efficiency of our protocol comes from the clustering of the group members, where the common session key is established collaboratively by all participants. We present the auxiliary protocols needed when the membership changes. We show that our protocol is superior in complexity in both communication and computation overheads required to generate the session key. Copyright © 2006 John Wiley & Sons, Ltd.