Effect of Polymethyl Methacrylate (PMMA) Powder to Liquid Monomer (P/L) Ratio and Powder Molecular Weight on the Properties of PMMA Cement

The present study investigated the effect of PMMA powder to liquid monomer (P/L) ratio and molecular weight of PMMA powder on the properties of PMMA cement. Two types of PMMA powder (Mw: 120,000 and 350,000) were prepared with different P/L ratios (based on wt/wt ratios); 0.75:1, 1:1, 1.25:1, and 1.5:1. Characterization of PMMA powders, handling characteristics and flexural properties of cured PMMA samples were investigated. In conclusion, low P/L ratio and high molecular weight of PMMA powders are desirable to produce PMMA cement with good handling properties and high flexural properties.     

Preparation and Properties of Biodegradable Polymer Film Based on Polyvinyl Alcohol and Tropical Fruit Waste Flour

In this study, two different types of tropical fruit waste flour, rambutan waste flour (RWF) and banana waste flour (BWF), were blended with polyvinyl alcohol (PVOH) by solution casting method. The structure of the blend film was characterised by Fourier Transform Infrared Spectroscopy. The tensile strength and elongation at break of tropical fruit waste flour-filled polyvinyl alcohol were lower, but the tensile modulus was higher, than that of PVOH film. At a similar blend ratio, the tensile properties of the PVOH/RWF film were higher than the PVOH/BWF film, but the PVOH/BWF film showed higher water uptake than PVOH/RWF film.     

ZnO nanorods surface-decorated by WO3 nanoparticles for photocatalytic degradation of endocrine disruptors under a compact fluorescent lamp

Nanoscaled tungsten oxide (WO₃) particles coated on ZnO nanorods (ZNRs) were newly synthesized by combining a hydrothermal technique with a chemical solution process. The structure, morphologies and compositions of the as-prepared WO₃–ZNR nanocomposites were characterized through XRD, FESEM, TEM and Raman measurements. The results revealed that pure monoclinic WO₃ nanoparticles with an average size range of 18–26 nm were distributed on the surfaces of ZNRs and attached strongly. Particularly, the optical properties as well as photocatalytic characteristics of pure ZNRs and WO₃–ZNR nanocomposites with different loadings of WO₃ were also examined. The absorption of WO₃–ZNR nanocomposites was redshifted due to effective immobilization of WO₃ on ZNRs. Under irradiation of a 55 W compact fluorescence lamp, the photocatalytic activities of the WO₃–ZNR nanocomposites were superior to those of pure ZNRs and P25 in the degradation of resorcinol (ReOH). Furthermore, WO₃–ZNR nanocomposites showed very favorable recycle use potential and high sedimentation rate. Other endocrine disrupting chemicals (EDCs) such as phenol, bisphenol A (BPA) and methylparaben were also successfully photodegraded under identical conditions. These characteristics showed the practical applications of the WO₃–ZNR nanocomposites in indoor environmental remediation.     

Optimization of rotor speed based on stretching,efficiency, and viscous heating in nonintermeshing internal batch mixer: Simulation and experimental verification

Optimization of rotor speed based on stretching, efficiency, and viscous heating in nonintermeshing internal batch mixer has been investigated using polymer melt. A practical optimization technique was followed for optimization. Four different rotor speeds were used and characterized numerically with viscous dissipation and stretching. The heat distribution between rotor edge and mixer wall was calculated. Stretching experienced by the fluid was analyzed and the result was verified experimentally using particle tracking method. Exponential increase of energy dissipation between the rotor edge and the barrel at higher speed highlighted the importance of choosing the thermal properties of the polymer to avoid thermal degradation. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Characterization of soda hardwood lignin and the formation of lignin fibers by melt spinning

Lignin fibers were developed from a commercial available soda hardwood lignin (SHL) with a melt‐spinning approach. SHL showed spinnability to form the fine fibers when poly(ethylene oxide) was used as a plasticizer with lignin. The thermal properties of lignin provided valuable information to assist the processing steps of the lignin fiber formation. The guaiacyl/syringyl ratio in SHL was determined by ³¹P‐NMR because it had great influence on the thermal mobility of lignin. A suitable temperature profile for the melt spinning was predicted through rheological studies of lignin. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and Characterization of Molecularly Imprinted Polymer Membrane for the Removal of 2,4-Dinitrophenol

Molecularly imprinted polymers (MIPs) were prepared by bulk polymerization in acetonitrile using 2,4-dinitrophenol, acrylamide, ethylene glycol dimethacrylate, and benzoyl peroxide, as the template, functional monomer, cross-linker, and initiator, respectively. The MIP membrane was prepared by hybridization of MIP particles with cellulose acetate (CA) and polystyrene (PS) after being ground and sieved. The prepared MIP membrane was characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. The parameters studied for the removal of 2,4-dinitrophenol included the effect of pH, sorption kinetics, and the selectivity of the MIP membrane. Maximum sorption of 2,4-nitrophenol by the fabricated CA membrane with MIP (CA-MIP) and the PS membrane with MIP (PS-MIP) was observed at pH 7.0 and pH 5.0, respectively. The sorption of 2,4-dinitrophenol by CA-MIP and PS-MIP followed a pseudo–second-order kinetic model. For a selectivity study, 2,4-dichlorophenol, 3-chlorophenol, and phenol were selected as potential interferences. The sorption capability of CA-MIP and PS-MIP towards 2,4-dinitrophenol was observed to be higher than that of 2,4-dichlorophenol, 3-chlorophenol, or phenol.     

Acetanilide-loaded injectable hydrogels with enhanced bioactivity and biocompatibility for potential treatment of periodontitis

Chronic periodontitis poses long-term challenges in dentistry, requiring the development of innovative dental composites with biocompatibility, bone regeneration, and antibacterial properties. This study focuses on synthesis of novel injectable thermoresponsive hydrogels composed of chitosan, sodium bicarbonate, bioactive glass (20 and 40% w/w), and acetanilide drug (0.3 and 0.6% w/w). These hydrogels exhibit a sol–gel transition at 37°C, addressing periodontal challenges with reduced gelation time. The smooth flow characteristic was evaluated through 17-22 gauge syringe needles at low temperature. Rheological studies demonstrated pseudoplastic behavior, with viscosity decreasing as shear rate increases. Fourier transform infrared and x-ray diffraction analysis confirmed the bioactivity of hydrogels, forming a bone-like apatite layer in simulated body fluid. The drug-loaded hydrogels demonstrated promising in vitro antibacterial properties against dental pathogens, specifically Staphylococcus aureus and Pseudomonas aeruginosa. Drug dissolution analysis revealed relatively high release rate at 37°C, highlighting its role in rapidly eliminating bacterial colonies at the target site, while the subsequent sustained release contributes to the prevention of infection recurrence. Finally, biocompatibility was assessed with fibroblast, where the cells were observed anchoring into the polymeric chains of hydrogel through extended filopodia.     

Formulation and Evaluation of an Automatic Dishwashing Detergent Containing T1 Lipase

The use of enzymes in detergent formulations is becoming popular due to the concerns about the environment. T1 lipase (E.C. 3.1.1.3) was evaluated for its stability and performance in dishwashing along with other common components of an automatic dishwashing detergent. Therefore, the process of formulating the detergent would depend on the stability of T1 lipase, which may also reflect the performance during the washing. T1 lipase was mostly stable in nonionic surfactants, especially those that were made of polyhydric alcohols. T1 lipase was also stable in a mixture of sodium carbonate and glycine. However, sodium carbonate alone destabilized T1 lipase possibly due to the interaction between carbonates and Ca²⁺. These results indicated that polyhydric alcohols and glycine had stabilizing effects on T1 lipase. The dishwashing performance was evaluated in term of percent soil removed. The dishwashing performance of the formulated detergent was positively affected by the increase in temperature but negatively affected by the presence of hard water, specifically Ca²⁺ and Mg²⁺. However, T1 lipase was not negatively affected by the presence of hard water, and this enzyme was enhanced by the presence of polyacrylates. The presence of Ca²⁺ improved the structural integrity of T1 lipase. It is generally known that most enzymes that depend on Ca²⁺ for their structural integrity would be greatly destabilized in the presence of metal chelators; thus, stabilizing strategies such as adding glycine would be essential to maintain enzyme activity during the wash.     

Effect of processing routes on the mechanical, thermal and morphological properties of PLA-based hybrid biocomposite

Due to environmental awareness and depletion of petroleum oil, bioplastics and their composites are one of the most researchable topics throughout the world. Polymers that are produced from renewable sources are expected to be the best alternative to replace conventional polymers. The bottles neck of these bioplastics is its cost which limits its application in certain purposes. Bioplastics filled or reinforced with natural fibers can reduce cost and improve properties, like stiffness, strength and toughness of biocomposites. Impact strength and fracture toughness are the main demerits of short fiber-filled biocomposite. On the other hand, when nanoclay, having a very high aspect ratio, is mixed with bioplastics it may significantly affect the thermal and mechanical properties of the final composites. A composite may also suffer dispersion inefficiency, which is considered the key factor to improve the properties. The aim of this paper was to hybridize nanoclay and short kenaf fiber in polylactic acid (PLA) by double extrusion method and followed by mechanical, thermal and morphological characterizations. Mechanical properties showed improvement with nanoclay, specifically the impact strength increased more than 50 % compared with unreinforced PLA. A double extruded composite showed 3–10 % better tensile and flexural properties than the single extruded composite. Similarly, addition of nanoclay increased decomposition and melting temperatures (T _m) from 198 to 225 °C and 152 to 155 °C, respectively. Crystallization temperature (T _c), however, dropped with nanoclay from 116 to 106 °C and storage modulus (E’) increased by about 1 GPa. These findings were also supported by scanning electron micrograph (SEM) and transmission electron micrograph (TEM) where in double extruded composite a better dispersion of nanoclay was observed. By employing X-ray diffraction (XRD) it was found that higher percentage of crystallinity was obtained while Fourier transform infrared (FTIR) displayed new bond formation. The presence of nanoclay enhanced thermal and mechanical properties of the hybrid composite.