Indoor radon concentration measurements were carried out and corresponding annual effective doses due to exposure to indoor radon were determined in Artvin and Ardahan provinces located in the eastern part of Turkey. The measurements were performed for four seasons in order to determine the seasonal fluctuations mostly observed in indoor environments. Indoor radon concentration values were observed to range from 21 to 321 Bq m?3 for the Artvin province and from 53 to 736 Bq m?3 for the Ardahan province. It was observed that minimum indoor radon concentration values were obtained in summer, while the highest ones were observed in winter. Indoor radon concentration values of the current study were compared with those of other provinces in Turkey. As elevated indoor radon concentrations are mostly correlated with high 23?U activity concentrations in soil, a total of 57 and 33 soil samples were collected from the Artvin and Ardahan provinces, respectively, to determine 23?U activity concentration as well as the concentration of 232Th and ??K--naturally occurring radionuclides. It was also observed that soil samples collected from the study areas contained 13?Cs as an artificial radionuclide. 相似文献
Considering that the use of thin-walled shells is expanding every day, it is important to examine the problem of instability in this form of structure. Many steel structures such as high-water tanks, water and oil reservoirs, marine structures, and pressure vessels, including shell elements, are under stress tension. In addition, shell elements are subject to instability owing to the loads applied. Ten thin-walled cylindrical shell specimens in two groups with different dent depths of tc and 2tc, and the different dent number subject to uniform external pressure were tested in the present research (tc is the thickness of cylindrical shell). The samples were modified to include either one or two dent line with amplitudes of h/3 in height (h the height of cylinder shell). Moreover, CFRP Strips on the dent depth was used in one of the groups. The results of testing under different theories and codes are compared.
Abstract A DTA study has been made to investigate the thermal reactivities of five Turkish lignites (Elbistan, Ilgin, Karliova, Xangal, Yatagan) in an air atmosphere. The coal samples exhibited thermal reactivity at temperatures starting from 20 °C and continuing up to 671 °C. Endothermic peaks were observed at the lower end of the temperature range, the highest endothermic peak temperature being 146°C for Elbistan lignite. Exothermic peaks appeared at around 260, 360 and 600 °C. These temperatures are considered to signify the release and combustion of single benzene ring structures and combustion of condensed aromatic rings respectively. Corresponding stages are observed in the TGA traces. After correcting for differences in methodology, the overall heat effects measured by DTA are within greater than 90% of the calorific values of the coal samples determined by bomb calorimetry. 相似文献
In this study the natural radioactivity in marble samples used in Turkey was measured by means of gamma spectrometry. The results showed that the specific activities of 226Ra, 232Th and 40K ranged from 10 to 92 Bq kg−1, from 4 to 122 Bq kg−1 and from 28 to 676 Bq kg−1, respectively. The radiological hazards in marble samples due to the natural radioactivity were inferred from calculations of radium equivalent activities (Raeq), indoor absorbed dose rate in air values, the annual effective dose and gamma and alpha indexes. These radiological parameters were evaluated and compared with the internationally recommended values. The measurements showed that marble samples used in Turkey have low level of natural radioactivity; therefore, the use of these types of marble in dwellings is safe for inhabitants. Mass attenuation coefficients (μ/ρ) were obtained both experimentally and theoretically for different marble samples produced in Turkey by using gamma-ray transmission method. Experimental values showed a good agreement with the theoretical values. 相似文献
This paper presents the experimental results of twenty full scale specimens of steel bolted connections beam-to-column with top-and-seat angles in six groups, labelled L91-tp8, L82-tp8, L73-tp8, L91-tp10, L82-tp10 and L73-tp10 groups (L=length of top-and-seat angle, tp=stiffener thickness of top-and-seat angle), under static loading. This study was undertaken to analyse the influence of angles and beams with stiffeners on the behaviour of the beam-to-column joints. The main parameters observed are the evolution of the resistance, the stiffness, the rotation capacity, the ductility of a joint, and the energy dissipation capacity. The aim was to provide necessary data to improve the Eurocode 3. 相似文献
We consider the problem of decomposing Intensity Modulated Radiation Therapy (IMRT) fluence maps using rectangular apertures. A fluence map can be represented as an integer matrix, which denotes the intensity profile to be delivered to a patient through a given beam angle. We consider IMRT treatment machinery that can form rectangular apertures using conventional jaws, and hence, do not need sophisticated multi-leaf collimator (MLC) devices. The number of apertures used to deliver the fluence map needs to be minimized in order to treat the patient efficiently. From a mathematical point of view, the problem is equivalent to a minimum cardinality matrix decomposition problem. We propose a combinatorial Benders decomposition approach to solve this problem to optimality. We demonstrate the efficacy of our approach on a set of test instances derived from actual clinical data. We also compare our results with the literature and solutions obtained by solving a mixed-integer programming formulation of the problem. 相似文献