Template-free synthesis of flower-shaped zero-valent iron nanoparticle: Role of hydroxyl group in controlling morphology and nitrate reduction

Well-dispersed single phasic flower-like zero valent iron nanoparticles have been synthesized under aerobic conditions using a facile approach without the addition of any additives or templates. The role of hydroxyl groups of polyhydroxy alcohols in controlling surface morphology of nanoparticles has been thoroughly investigated. The obtained nanoparticles have been characterized by TEM, FE-SEM, XRD and BET surface area analyzer. Electron microscopy analyses reveal that the solvent plays a pivotal role in determining the morphology of the particles. With increase in viscosity of the solvent, formations of ‘petal-like’ structures, which are joined at the center are formed. The nitrate removal efficiency of the iron nanoparticles synthesized in different solvents has been studied and it is seen that the “flower-like” iron nanoparticles were most active in the removal of nitrate. Experiments have been done by varying (i) nitrate concentrations, (ii) nanoparticle dose, and (iii) type of nanoparticles. The results conclude that highest removal efficiency (～100%) was achieved when the nanoparticle dose was 2.88 g/L, even for high nitrate concentrations up to 400 mg/L. The major highlight of this work is the fact that even though the nanoparticles synthesized in glycerol-water mixture have larger size in comparison to the other nanoparticles, still they remove the nitrates with highest efficiency.”     

Bone cell–materials interaction on alumina ceramics with different grain sizes

The objective of this work was to study adhesion, proliferation and differentiation of osteoblast cells (OPC1) on alumina ceramic, a bio-inert material. Alumina ceramic with different average grain sizes, 1 μm and 12 μm, respectively, were used in as-prepared condition without any grinding and polishing to understand the influence of grain size on cell–material interactions. Scanning electron microscopy and confocal imaging were used to study attachment, adhesion and differentiation of OPC1 cells. Cells attached, proliferated and differentiated well on both the substrates. Adhesion of cells, as assessed by observing the production of vinculin, was found to be a consistent phenomenon on both the substrates. On day 5 of cell culture, significant cell-attachment was observed and vinculin was detected throughout cytoplasm. MTT assay showed that proliferation of OPC1 cells was consistently higher in the case of 12 μm-alumina. Cells of different morphology, nodular, plate-like as well as elongated, were found to get anchored at grains, grain boundaries as well as pores. On day 16, there were clear signs of mineralization as well. Over all, alumina with average grain size of 12 μm showed better cell-attachment, growth and differentiation compared to 1 μm grain size samples.     

Disaster-survivable cloud-network mapping

Cloud-computing services are provided to consumers through a network of servers and network equipment. Cloud-network (CN) providers virtualize resources [e.g., virtual machine (VM) and virtual network (VN)] for efficient and secure resource allocation. Disasters are one of the worst threats for CNs as they can cause massive disruptions and CN disconnection. A disaster may also induce post-disaster correlated, cascading failures which can disconnect more CNs. Survivable virtual-network embedding (SVNE) approaches have been studied to protect VNs against single physical-link/-node and dual physical-link failures in communication infrastructure, but massive disruptions due to a disaster and their consequences can make SVNE approaches insufficient to guarantee cloud-computing survivability. In this work, we study the problem of survivable CN mapping from disaster. We consider risk assessment, VM backup location, and post-disaster survivability to reduce the risk of failure and probability of CN disconnection and the penalty paid by operators due to loss of capacity. We formulate the proposed approach as an integer linear program and study two scenarios: a natural disaster, e.g., earthquake and a human-made disaster, e.g., weapons-of-mass-destruction attack. Our illustrative examples show that our approach reduces the risk of CN disconnection and penalty up to 90 % compared with a baseline CN mapping approach and increases the CN survivability up to 100 % in both scenarios.     

A new strain hardening model for rate-dependent crystal plasticity

This paper presents a crystal plasticity based finite element analysis employing the new microstructure-based strain hardening model recently presented by Saimoto and Van Houtte (2011) [7] to simulate formability and texture evolution in the commercial aluminum alloy 5754. Simulations are performed to compare the predictive capability of the new hardening model against the common work hardening models using a rate-dependent plasticity formulation. The parameters in the numerical models are calibrated using the X-ray data published by Iadicola et al. (2008) [9] for the aluminum sheet alloy 5754. The predictions of the model for balanced biaxial tension and in-plane plane-strain tests are compared against experimental observations presented in Iadicola et al. (2008) [9]. It is concluded that the new model provides the best predictions of the large strain behavior of Aluminum sheet alloy 5754 subjected to various strain paths.     

多核方法满足LTE SoC设计挑战

LTE的性能需求是3G网络的100-1，000倍。单核DSP已不足以满足这样的性能，采用多核方法，且每个核均针对任务进行特殊优化，将可以帮助设计师高效实现LTE处理所需的性能。     

Bootstrapping a weighted linear estimator of the ARCH parameters

Abstract.  A standard assumption while deriving the asymptotic distribution of the quasi maximum likelihood estimator in ARCH models is that all ARCH parameters must be strictly positive. This assumption is also crucial in deriving the limit distribution of appropriate linear estimators (LE). We propose a weighted linear estimator (WLE) of the ARCH parameters in the classical ARCH model and show that its limit distribution is multivariate normal even when some of the ARCH coefficients are zero. The asymptotic dispersion matrix involves unknown quantities. We consider appropriate bootstrapped version of this WLE and prove that it is asymptotically valid in the sense that the bootstrapped distribution (given the data) is a consistent estimate (in probability) of the distribution of the WLE. Although we do not show theoretically that the bootstrap outperforms the normal approximation, our simulations demonstrate that it yields better approximations than the limiting normal.     

Comparative evaluation of corrosion behaviour of type K thin film thermocouple and its bulk counterpart

This paper investigates the corrosion behaviour of type K thermoelements and their thin films, and compares the performance of chromel–alumel thin film thermocouple with its wire counterpart before and after exposure to 5% NaCl medium. Potentiodynamic polarisation tests reveal that chromel and alumel films are more “noble” than their respective wires. Alumel corrodes faster when coupled with chromel in films than as wires. Secondary electron micrographs and electrochemical impedance spectroscopy measurements suggest that chromel shows localised corrosion while alumel undergoes uniform corrosion. Corrosion adversely affects the thermocouple output and introduces an uncertainty in the measurement.     

Programmable memory in organic field-effect transistor based on lead phthalocyanine

A nonvolatile organic field-effect transistor (OFET) with a polymeric electret as gate insulator and spun cast film of lead phthalocyanine (PbPc) as semiconductor channel is reported. Hysteresis induced by gate–bias stress was exploited to study nonvolatile memory effects. The observation of the hysteresis and memory window is proposed to originate from charge storage in the polymeric electret. The on state retention time for the OFET memory device is more than 5 h and the device can reproduce continuous write–read–erase–read switching cycles.     

Preparation, thermal expansion, high pressure and high temperature behavior of Al2(WO4)3

The titled compound Al₂(WO₄)₃ was synthesized by a conventional solid state reaction and characterized by powder XRD. It crystallizes in an orthorhombic (Pbcn, No. 60) lattice, with unit cell parameters as 12.582(2), 9.051(1), 9.128(2) Å, and V = 1039.5(3) (Å)³. The compound was found to show negative thermal expansion (NTE) behavior in the temperature range of 25 to 850°C. The average linear NTE coefficient (₁), in this temperature range, was –1.5 × 10^–6 K^–1. The effect of pressure at ambient temperature, was studied by a Bridgman Anvil (BA) apparatus, to reveal that there is no irreversible phase transition up to 8 GPa. The effect of high pressure and high temperature on this compound was studied by a Toroid Anvil (TA) apparatus. This compound has a limited stability under high pressure and temperature, as it undergoes a decomposition to AlWO₄ and WO_3–x with a partial oxygen loss. As an off-shoot of this work, certain new modifications of WO_3–x under pressure and temperature were observed, viz., monoclinic, tetragonal and an orthorhombic modifications at 5 GPa/1400°C, 3 GPa/900°C and 1.8 GPa/1030°C, respectively. The detailed XRD studies of the products are presented here.     

A middleware‐transparent approach to developing distributed applications

An innovative middleware‐transparent approach to developing distributed applications is presented. The approach uses an aspect‐oriented software development technique to separate an application's middleware‐independent functionality from its middleware‐specific functionality. Application elements that are specific to the middleware are localized in aspects that can be seamlessly integrated into middleware‐independent application designs. The middleware‐transparent approach is used to decouple business functionality from middleware‐specific functionality. The decoupling allows developers to change middleware application elements without significantly modifying business functionality. Middleware technologies such as Java Remote Method Invocation (RMI), Jini, Simple Object Access Protocol (SOAP) remote procedure call (RPC) and .Net are used as examples to illustrate the approach. Copyright © 2005 John Wiley & Sons, Ltd.