Performance Analysis of Prefix Delegation-Based Route Optimization Schemes: Effects of Increasing the Number of Nodes

Prefix delegation-based schemes have been proposed to solve the route optimization problem in NEtwork MObility where multiple IP-enabled hosts move together as a mobile network. Differences in the route optimization for hosts at the cost of increased signaling will result in performance difference of the schemes depending on parameters, such as speed of the mobile network, its distance from the home network (the network to which mobile network usually belongs), and the number of hosts in the mobile network. Although the effects of the first two parameters on the performance of the schemes have been studied, effects of increasing the number of hosts have not been studied. Therefore, there is a need to evaluate performance when the number of hosts is increased. We perform the evaluation through ns-2 simulation. Results show that the performance superiority achieved by the hosts?? route optimization is only affected by the distance significantly only when the number of hosts is small. The results will help to decide when to use the route optimization for hosts depending on the values of the parameters.     

Ab initio study of structural,electronic, phase diagram,and optical properties of CdSe<Subscript><Emphasis Type=Italic>x</Emphasis></Subscript>Te<Subscript><Emphasis Type=Italic>1−x</Emphasis></Subscript> semiconducting alloys

Based on the self-consistent ab initio full potential-linearized augmented plane wave method, the structural, electronic, optical, and thermodynamic properties of CdSe _x Te_1−x ternary semiconductor alloys have been investigated. The exchange–correlation potential was calculated using both the generalized gradient approximation (GGA) by Perdew–Burke–Ernzerhof (PBE) and the GGA by Engel–Vosko (EV-GGA). The ground-state properties are determined for the cubic bulk materials CdSe, CdTe, and their mixed crystals at various concentrations (x = 0.25, 0.5, and 0.75). Deviation of the lattice parameter from Vegard’s law and the bulk modulus from linear concentration dependence has been examined. The microscopic origins of the band-gap bowing parameter have been discussed. Moreover, the refractive index and the optical dielectric constant for CdSe _x Te_1−x are studied using different models. Besides, the thermodynamic stability of the alloys of interest is investigated by means of the miscibility critical temperature.     

Thermoeconomic optimization of a shell and tube condenser using both genetic algorithm and particle swarm

This paper presents a thermoeconomic optimization of a shell and tube condenser, based on two new optimization methods, namely genetic and particle swarm (PS) algorithms. The procedure is selected to find the optimal total cost including investment and operation cost of the condenser. Initial cost includes condenser surface area and operational cost includes pump output power to overcome the pressure loss. Design parameters are tube number, number of tube pass, inlet and outlet tube diameters, tube pitch ratio and tube arrangements (30, 45, 60 and 90°). Therefore, shell diameter should be selected less than 7 m, tube length should be less than 15 m, and ratio of diameter to tube length should be in the range of 1/12 to 1/3. In addition, it is found that GA provides better results for computer CPU running time, compared to PS algorithm. Finally, a sensitivity analysis of design parameters at the optimal point is conducted. Results show that an increase in the tube number leads to decrease in the objective function first then it leads to a considerable increment in objective function.     

First principles calculations of structural,electronic, optical and thermodynamic properties of PbS,SrS and their ternary alloys Pb1−xSrxS

Using first-principle method, we investigate the structural, electronic, optical and thermodynamic properties of the strontium semiconductors Pb_1?xSr_xS with 25%, 50% and 75% of Sr. The calculations are performed by using the full-potential linearized augmented plane wave (FP-LAPW) method. As exchange–correlation potential we used the generalized gradient approximation (GGA) of Perdew et al. The variation of the calculated equilibrium lattice constant versus concentration shows that a small deviation from Vegard’s law is clearly visible with downward bowing parameter equal to 0.009 Å. The bulk modulus as a function of x for Pb_1?xSr_xS alloy shows a significant deviation from the linear concentration dependence (LCD) with downward bowing equal to 6.62 GPa. The different roles of structural and chemical effects on the gap bowing and its variation with composition are identified and discussed. In addition, density of states and optical properties were calculated and compared to the available experimental data and previous theoretical works. On the other hand, the thermodynamic stability of these alloys was investigated by calculating the excess enthalpy of mixing ΔH_m as well as the phase diagram.     

Crypt analysis of two time pads in case of compressed speech

Keystream reuse, also known as the two time pad problem, is a well known weakness in stream ciphers. The implementers of the cryptographic algorithms are still underestimating this threat. The keystream reuse exploitation techniques presented so far assume the underlying plaintext to be textual data and all the heuristics presented previously are based on the language characteristics of the underlying text based data, which fail when compression is applied on the plaintext before encryption. This paper presents exploitation techniques for two time pads in case of stream ciphered digitized and compressed speech signals. In this paper we show that how an adversary can automatically recover the digitized speech signals encrypted under the same keystream provided the language (e.g. English) and digital encoding/compression scheme details of the underlying speech signals are known. Our technique of cryptanalysis is based on the modeling of the speech parameters by exploiting the inter frame correlations between each components of the speech vectors in different frames and then using these models to decode the two speech signals in the keystream reuse scenario. The technique is flexible enough to incorporate all modern speech coding schemes based on parameter or hybrid encoding and compression techniques. The simulation experiments have showed promising results for most of the present day speech digitization and compression techniques.     

Effect of Postweld Heat Treatment on Microstructure, Hardness, and Tensile Properties of Laser-Welded Ti-6Al-4V

The effects of postweld heat treatment (PWHT) on 3.2-mm- and 5.1-mm-thick Ti-6Al-4V butt joints welded using a continuous wave (CW) 4-kW Nd:YAG laser welding machine were investigated in terms of microstructural transformations, welding defects, and hardness, as well as global and local tensile properties. Two postweld heat treatments, i.e., stress-relief annealing (SRA) and solution heat treatment followed by aging (STA), were performed and the weld qualities were compared with the as-welded condition. A digital image correlation technique was used to determine the global tensile behavior for the transverse welding samples. The local tensile properties including yield strength and maximum strain were determined, for the first time, for the laser-welded Ti-6Al-4V. The mechanical properties, including hardness and the global and local tensile properties, were correlated to the microstructure and defects in the as-welded, SRA, and STA conditions.     

Mass-production of flexible and transparent Te-Au nylon SERS substrate with excellent mechanical stability

Nano Research - In the past two decades, the field of surface-enhanced Raman scattering (SERS) has flourished and many rational strategies have been reported for the successful construction of SERS...     

Optimization of biohydrogen production by Clostridium butyricum EB6 from palm oil mill effluent using response surface methodology

Clostridium butyricum EB6 successfully produced hydrogen gas from palm oil mill effluent (POME). In this study, central composite design and response surface methodology were applied to determine the optimum conditions for hydrogen production (P_c) and maximum hydrogen production rate (R_max) from POME. Experimental results showed that the pH, temperature and chemical oxygen demand (COD) of POME affected both the hydrogen production and production rate, both individually and interactively. The optimum conditions for hydrogen production (P_c) were pH 5.69, 36 °C, and 92 g COD/l; with an estimated P_c value of 306 ml H₂/g carbohydrate. The optimum conditions for maximum hydrogen production rate (R_max) were pH 6.52, 41 °C and 60 g COD/l; with an estimated R_max value of 914 ml H₂/h. An overlay study was performed to obtain an overall model optimization. The optimized conditions for the overall model were pH 6.05, 36 °C and 94 g COD/l. The hydrogen content in the biogas produced ranged from 60% to 75%.