Sediment flux from Lesser Zab River in Dokan Reservoir: Implications for the sustainability of long‐term water resources in Iraq

Prudent management of Iraqi water resources under climate change conditions requires plans to be based on actual figures of the storage capacity of existing reservoirs. With the absence of sediment flushing measures, the actual storage capacity of Dokan Reservoir (operated since 1959) has been affected by the amount of sediment delivered during its operational life leading to an undetermined reduction in its storage capacity. In consequence, there has not been an update on the dam's operational storage capacity curves. In this research, new operational curves were established for the reservoir based on a recent bathymetric survey undertaken in 2014. The reduction in reservoir capacity during the period between 1959 and 2014 was calculated by the mean of the difference between the designed storage capacity and the storage capacity which was concluded from the 2014 bathymetric survey. Moreover, the rate of sediment transported to the reservoir was calculated based on the overall quantities of accumulated sediment and the water discharge of the Lesser Zab River into the reservoir. The results indicate that the dam capacity is reduced by 25% due to sedimentation of an estimated volume of 367 million cubic metres at water level 480 m.a.s.l. The annual sedimentation rate was about 6.6 million cubic metres, and the sediment yield was estimated to be 701.2 t?km^?3?year.     

Bathymetry and siltation rate for Dokan Reservoir,Iraq

The Dokan Reservoir dam is a concrete cylindrical arch with gravity abutments, located on the Lesser Zab River about 60 km from the city of Sulaimani in north‐eastern Iraq. A bathymetric survey was conducted in November 2014 for a period of 10 days, using an echo sounder of 200‐kHz single beam. The survey results indicated an annual average sediment deposition of 3.8 million m³. Thirty‐two sediment samples were collected from the reservoir bed. The ratio of gravel, sand, silt and clay was 15:14:48:23, respectively. The reservoir bed is covered mainly with silt. The sediments are composed of silty clay (77.6%), silty sandy clay (10%), sandy gravely silty clay (1.2%) and gravely sandy silty clay (1%).     

Synthesis of Some Novel Antioxidant and Anticorrosive Additives for Egyptian Lubricating Oils

Abstract

The starting oxazolone 1 was reacted with p-aminophenol in glacial acetic acid to afford imidazolone 2, which afforded Mannich base 3 via the reaction with piperidine and paraformaldehyde. Moreover, the reaction of 2 with ethylchloroacetate or chloroacetic acid in dry acetone gave the corresponding imidazolones 4 and 5, respectively. Compound 4 reacted with benzylamine or 4-chlorobenzaldehyde to furnish 6 and 7, respectively. On the other hand, oxazolone 1 reacted with hydrazines in glacial acetic acid to afford the 1,2,4-triazines 11–15. Representative compounds of the synthesized products were established and evaluated as antioxidant and corrosion inhibitors for gasoline lube oils.     

Low band gap poly(1,4-arylene-2,5-thienylene)s with benzothiadiazole units: Synthesis, characterization and application in polymer solar cells

We describe the synthesis of two novel poly(1,4-arylene-2,5-thienylene)s P1 and P2 containing benzo[c][2,1,3]thiadiazole monomeric units via Suzuki-Miyaura polymerization of a thiophene diboronic ester with aryl diiodides. The use of a catalyst complex consisting of Pd(OAc)₂ in combination with the electron-rich biaryl phosphine S-Phos resulted in efficient polymerization reactions. The polymers synthesized, P1 and P2, were characterized by UV-vis spectroscopy and cyclic voltammetry. Theoretical calculations and electrochemical measurements on P1 suggested a favorable position of the molecular orbitals for employment in polymer solar cells in combination with PCBM. Devices containing P1:PCBM 1:2 in the active layer showed an efficiency of 1.2% by simple spin casting from chloroform.     

Influence of nanofluids on mixed convective heat transfer over a horizontal backward‐facing step

Predictions are reported for laminar mixed convection using various types of nanofluids over a horizontal backward‐facing step in a duct, in which the upstream wall and the step are considered adiabatic surfaces, while the downstream wall from the step is heated to a uniform temperature that is higher than the inlet fluid temperature. The straight wall that forms the other side of the duct is maintained at constant temperature equivalent to the inlet fluid temperature. Eight different types of nanoparticles, Au, Ag, Al₂O₃, Cu, CuO, diamond, SiO₂, and TiO₂, with 5% volume fraction are used. The conservation equations along with the boundary conditions are solved using the finite volume method. Results presented in this paper are for a step height of 4.9 mm and an expansion ratio of 1.942, while the total length in the downstream of the step is 0.5 m. The Reynolds number is in the range of 75 ≤ Re ≤ 225. The downstream wall was fixed at a uniform wall temperature in the range of 0 ≤ ΔT ≤ 30 °C which is higher than the inlet flow temperature. Results reveal that there is a primary recirculation region for all nanofluids behind the step. It is noticed that nanofluids without secondary recirculation region have a higher Nusselt number and it increases with Prandtl number decrement. On the other hand, nanofluids with secondary recirculation regions are found to have a lower Nusselt number. Diamond nanofluid has the highest Nusselt number in the primary recirculation region, while SiO₂ nanofluid has the highest Nusselt number downstream of the primary recirculation region. The skin friction coefficient increases as the temperature difference increases and the Reynolds number decreases. © 2011 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20344     

GENOTOXICITY IN CHIRONOMUS KIIENSIS (CHIRONOMIDAE: DIPTERA) AFTER EXPOSURE TO POLLUTED SEDIMENTS FROM RIVERS OF NORTH PENINSULAR MALAYSIA: IMPLICATION FOR ECOTOXICOLOGICAL MONITORING

Rapid industrialization and urbanization has led to increasing input of chemical contaminants into the aquatic environment of Malaysia. Despite the threat civilization poses to the biota, there are still very few relevant studies on ecotoxicological testing of river ecosystems. To overcome this knowledge gap, we examined lethal and genotoxic effects of sediments from different rivers of the northern Malaysia against Chironomus kiiensis, a group well represented in the aquatic fauna of this region. We exposed the larvae to sediments from Selama River (SR), Permatang Rawa River (PRR) and Kilang Ubi River (KUR) at various durations (0, 6, 12, 24 and 48 h). The larval mortality was monitored, whereas DNA damage in survivors' cells was determined using the comet assay. Pollution level indexed by the amounts of heavy metals and other organic contaminants in the sediment showed progressive increases from SR to PRR to KUR. Highly polluted sediments (PRR to KUR) were detrimental to C. kiiensis larvae, most of which did not survive following exposure for long periods. DNA analyses revealed greater damages in nuclei derived from larvae maintained on polluted sediments, in particular, those from KUR. The effects on the genomic material of C. kiiensis larvae occurred in a time‐dependent manner, with damage level increasing as exposure time progressed. Our results highlight the genotoxic properties of polluted sediments. More importantly, this study showed that C. kiiensis larvae could respond to different levels of pollution with respect to exposure time. It is concluded that C. kiiensis larvae is a potential candidate for river ecotoxicological monitoring. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of Pipe Networks by the Finite Element Method

ABSTRACT

In this paper, the finite element technique used in the analysis and design of water distribution networks will be presented. The method was applied successfully to the solution of three different networks.

In order to demonstrate the feasibility of the approach and to show some merits and demerits of the finite element method, a comparison was made on a digital computer with the standard Hardy Cross method. In all cases the finite element method was shown to provide superior performance.

Moreover, the programmes were run on three different machines [Wang vs 100, Apple IIe, and IBM micro-computer] to show the effect of increasing storage capacity, machine accuracy, and time saving.     

Egyptian Mango Juice. Experiment on Storage Experience

In this study processed mango juice was packed in four types of containers and stored at different temperatures for 16 weeks through which furfural level determination and organoleptic assessment were conducted. The experiment revealed an evident relationship to exist among furfural level, storage temperature and type of packing material. Furfural level failed to closely parallel flavour difference; therefore it could be regarded as one of the features concomitant juice aging rather than accepted as a satisfactory criterion of off flavour. The study relates flavour deterioration to the changes in the lipid fraction of the juice.     

Base-catalyzed oxidation of poly (ethylene glycol) by alkaline permanganate: Part I. Kinetics and mechanism of formation of coordination intermediate complex

A spectrophotometric investigation has been applied to study the kinetics of oxidation of poly (ethylene glycol) (PEG) as a synthetic polymer by alkaline permanganate at a constant ionic strength of 1.0 mol.dm^?3. The reaction was found to proceed through two distinct measurable stages. The first stage was relatively fast and corresponding to the formation of coordination polymer intermediate complexes involving blue hypomanganate (V) and/or green manganate (VI) transient species. The influence of variable factors on the oxidation rates such as the concentration of permanganate ion and PEG substrate concentrations as well as the pH and ionic strength have been examined. Under the pseudo-first-order reaction conditions of [PEG] ? [MnO₄^?], the experimental results showed a first-order dependence in [MnO₄^?] and fractional first-order kinetics in each of [PEG] and alkali concentration. The oxidation process was of base-catalyzed nature where the oxidation rates were increased with increasing the alkali concentration. The observed first-order rate constant was found to be 1.1 ×10^?3 s^?1 with deprotonation constant of 0.72 dm³ mol^?1 at 45 °C. Blue hypomanganate (V) was detected for the first time by using a conventional spectrophotometer. The oxidation process has proceeded without the intervention of a free-radical mechanism. Colloidal manganese (IV) and the acid derivatives of PEG were identified as final oxidation products. The activation parameters of the second-order reaction have been calculated and found to be ΔH^≠ = 40.66 kJmol^?1; ΔS^≠ = ? 145.41 Jmo^l?K^?1 and ΔG^≠ = 83.99 kJmol^?1. A plausible reaction mechanism for oxidation based on the evaluated activation parameters and in good consistent with the observed kinetic data was suggested and discussed.     

Synthesis and evaluation of some new oxazolones and imidazolones as antioxidant additives for Egyptian lubricating oils

Oxazolone derivative 2 was utilized as a key intermediate for synthesis of some new oxazolone and imidazolone derivatives. Reaction of oxazolone derivative 2 with diamines under different conditions afforded the corresponding imidazolone derivatives 3-8, respectively. Moreover, oxazolone 2 reacted with some heterocyclic amines in glacial acetic acid giving the corresponding imidazolone derivatives 9-14, respectively. Cyclocondensation of thiosemicarbazide with compound 2 in dry pyridine afforded compound 15. Addition of secondary amines to olefin double bond of compound 2 gave the corresponding addition products 16-19, respectively. Michael addition of compound 2 with some active methylene compounds afforded oxazolone derivatives 20-23, respectively. These prepared products were evaluated as antioxidant and corrosion inhibitors for gasoline lubricating oil and compounds 6a-c, 10 and 15 exhibited the highest antioxidant and anticorrosive activities. The effect of concentration of additives was studied to recommend the optimum concentration to be used. The results showed, for additive 15, 0.1 g for 1 L oil was the more effective concentration. Measurements for thermal analysis and of surface tension of oil after oxidation were also carried out.