Kinetic Investigation of Reaction Between Mineral Ulexite and Citric Acid

In this study, the dissolution kinetics of ulexite, a sodium-calcium-borate hydrate (Na₂O·2CaO·5B₂O₃·16H₂O) in citric acid solutions was investigated in a batch reactor. The rate of dissolution can be expressed according to surface chemical reaction controlling with changing fluid reactant concentration. The activation energy of the process was found to be 39.4 kJ/mol.     

Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Reordering for improving global Arnoldi–Tikhonov method in image restoration problems

This paper discusses the solution of large-scale linear discrete ill-posed problems arising from image restoration problems. Since the scale of the problem is usually very large, the computations with the blurring matrix can be very expensive. In this regard, we consider problems in which the coefficient matrix is the sum of Kronecker products of matrices to benefit the computation. Here, we present an alternative approach based on reordering of the image approximations obtained with the global Arnoldi–Tikhonov method. The ordering of the intensities is such that it makes the image approximation monotonic and thus minimizes the finite differences norm. We present theoretical properties of the method and numerical experiments on image restoration.     

Glycation of soy protein isolate with two ketoses: d-Allulose and fructose

Modification of food proteins to have improved functional properties is of great importance. In this study, modification of soy protein isolate (SPI) was achieved through glycation. SPI was glycated in a spray dryer (SD) and an incubator followed by freeze drying (FD). d -Allulose, an important rare sugar, was used in SPI glycation as the carbohydrate source, and results were compared with fructose. In addition to the sugar type, two different SPI powder: sugar ratios (1:1 and 5:1) were investigated. For the glycated samples, emulsification activity, free amino groups, protein solubility, Fourier-transform infrared spectroscopy analysis, antioxidant activity experiments and time-domain NMR relaxometry measurements for hydration were conducted. According to the results, the solubility of SPI that is limited in native form has shown a significant improvement after glycation through both FD and SD methods. Besides, glycation through the FD method was found to be more favourable due to its milder conditions than the SD method. Considering the physicochemical properties, the best combination for the highest glycation degree was found to be the samples prepared at the 1:1 ratio with d -Allulose in the FD method. Overall, it was concluded that glycation of SPI enhanced its functional properties such as antioxidant and emulsification activities.     

The Water-Soluble Peripheral Substituted Phthalocyanines as Corrosion Inhibitors for Copper in 0.1 N HCl: Gravimetric,Electrochemical, SEM-EDS,and Quantum Chemical Calculations

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition effects of water-soluble peripheral substituted cobalt, copper and zinc metallophthalocyanines (CoPc (1), CuPc (2) and...     

Effects of Mn and Gd Co-substituted into ZnO on Structural and Magnetic Properties

We have worked on the structural and magnetic properties of Zn_0.99?xMn_0.01Gd _x O _δ (for x = 0.02, 0.03, and 0.04) compounds prepared by using a sol–gel method. The x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to understand the structural properties of the samples. We observed that co-substitution of Mn (1 %) and Gd (2–4 %) into the ZnO does not change the hexagonal structure. Scanning electron microscope (SEM) images show us that the grain size decreases with the increasing amount of the Gd into the ZnO matrix. The magnetic properties of the samples have been investigated by using magnetic hysteresis and DC susceptibility measurements. The ZMG1 sample shows a weak ferromagnetic behavior at room temperature, whereas the ZMG2 and ZMG3 samples exhibit a paramagnetic nature. Furthermore, it is also found that the magnetizations of the samples decrease with increasing Gd content in the ZnMnO system due to the enhancing interaction between Gd ³⁺ ions. We summarize that the co-substitution of Mn and Gd into the ZnO generates a room-temperature ferromagnetism, but it still needs more work to obtain strong and high coercivity magnetic loops for applications.     

Simulation of exhaust gas reforming of propane in a heat exchange integrated microchannel reactor

Exhaust gas reforming of propane to a hydrogen-rich mixture in a single, heat-exchange integrated, adiabatic, catalytic microchannel is modeled and simulated at different exhaust gas compositions from conventional gasoline and diesel fueled engines. Propane is considered as the model hydrocarbon for the complex fuels such as gasoline and diesel. The single microchannel is considered to be the characteristic unit of the catalytic exhaust gas reformer involving identical channels located parallel to each other. Steady-state simulations, carried out by the finite volume method, involve parametric variations of the total feed flow rate, and the amounts of propane and steam injected externally into the exhaust gas (reformer feed) stream. The results show that effective heat transfer and uniform temperature distribution, which are critical for the successful operation of the exhaust gas reformer, can be obtained in the microchannel configuration even at low gas hourly space velocities (GHSVs) at which the conventional packed-bed reformers usually lead to remarkable hot-spot formation. Production of H₂ and CO is favored by the addition of higher amounts of propane and steam into the reformer feed. Increasing the total feed flow rate, hence the GHSV is found to improve heat distribution along the microchannel at the expense of reduced product yields due to insufficient contact time.