Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.     

Functionalized Hybrid Coatings on ABS Surfaces by PLD and Dip Coatings

It is important to give water-repellent and antibacterial properties to the acrylonitrile butadiene styrene (ABS) surfaces of the hearing aids. In this study, the sol–gel Si and sol–gel Ti solutions were prepared from the reactions of silicon ethoxide, titanium butoxide and methacrylic acid. The catalyst and Dynasylan F8815 were added to the sol–gel solutions to give hydrophobic properties onto the ABS surfaces. Additionally, silver nanoparticles were synthesized by nanosecond laser and added to the coating solutions to give extra antibacterial properties. The surfaces of the ABS targets were coated using the sol–gel dip coating and pulsed laser deposition techniques. The coatings with good adhesion between film and substrate and good water-repellent properties were achieved. The average contact angles for the coated ABS surfaces were measured in the range between 120 and 125 degrees. The obtained sol–gel materials and produced thin films onto the ABS surfaces were also analyzed in terms of the antibacterial properties. The highly antibacterial properties were observed in the sol–gel solutions and the thin films.     

Dyeing of poly(lactic acid) fibres with synthesised novel heterocyclic disazo disperse dyes

Poly(lactic acid) (PLA) is the first melt‐processable, renewable, sustainable and biodegradable natural‐based synthetic fibre. It has a broad range of uses and combines ecological advantages with outstanding performance in textiles. PLA fibre, as an aliphatic polyester, can be dyed with disperse dyes. Apart from the limited number of commercial disperse dyes, disperse dye exhaustion on PLA is generally lower than that on  poly(ethylene terephthalate) (PET). In this study, new heterocyclic disazo disperse dyes, substituted with methyl, nitro and chloro groups at their ortho‐, meta‐ and para‐ positions, synthesised in our previous study, were applied to PLA and PET fibres to examine their dyeing performance, and colour fastness and dye exhaustion properties. Different shades of yellow, orange, reddish brown and brown were obtained. Most of the synthesised novel heterocyclic disazo disperse dyes exhibited good build‐up properties with high K/S levels on both fibres. Para‐ bonding substituent provided higher K/S values than meta‐ and ortho‐ positions for –NO₂ and –Cl substituents for both fibres. Overall, the most synthesised novel heterocyclic disazo disperse dyes in this study exhibited good build‐up properties with high K/S, exhaustion and wet fastness levels on both PLA and PET fibres.      

Usage of bioactivated PCL nanofiber as a fluoxetine capturing matrix in milk

ABSTRACT

In this study, for the first time, polycaprolactone (PCL) nanofiber matrix was bioactivated for the removal of fluoxetine from milk. Bioactivated nanofiber was prepared by immobilizing fluoxetine antibody on PCL nanofiber matrix. The fluoxetine removal efficiency of bioactivated nanofiber in milk was found to be approximately 93.6%. This removal did not significantly change the biochemical composition of milk. In conclusion, as a novel product, bioactivated nanofibrous PCL matrix can be used for the removal of drugs or unwanted chemicals from breast milk or from other fluids.     

Gas chromatographic-olfactometric characterization of aroma active compounds in sun-dried and vacuum-dried tarhana

The influence of drying methods on the aroma active volatiles of sun-dried tarhana (SDT) and vacuum-dried tarhana (VDT) were compared using headspace SPME, GC-O and GC-MS. Although vacuum drying reduced the total amount of volatiles as compared to SDT (total FID peak area), more aroma active material was retained with VDT (total olfactory peak area). Vacuum drying retained a greater number of aroma active components (41) whereas the sun-dried method retained only 23. Aldehydes were the largest single class of aroma compounds in both types of tarhana: 17 in VDT and 10 in SDT. Other differentiating aroma compounds include alcohols, terpenes, and phenols such as geraniol, terpinolene, and 4-vinylguaiacol among others. A total of 22 aroma active components were present in greater amounts in the VDT versus only four aroma compounds present in greater amounts in the SDT.     

Selective separation of cobalt and nickel by flat sheet supported liquid membrane using Alamine 300 as carrier

Cobalt and nickel are among the most important nonferrous metals. The using of flat sheet supported liquid membranes (FSSLMs) to remove metals from wastewaters has been used actively by the scientific and industrial communities. In this study, the selective separation of cobalt from thiocyanate solutions containing cobalt and nickel by FSSLM was examined using tri-n-octylamine (Alamine 300) as carrier. The FSSLM was consisted of extractant, flat sheet support and organic solvent. The various parameters were studied to determine the optimum extraction and striping conditions of cobalt and nickel. These parameters were stirring speeds of phases, NH₄SCN concentration, pH, diluent type, extractant concentration, stripping reagent concentration and modifier concentration. Concentration of cobalt and nickel were determined by Shimadzu AA-6701GF spectrophotometer. In the optimum conditions, selective separation of cobalt was achieved with an efficiency of 98.4% within 8 h, for equimolar feed mixtures, 400 mg/L Co + 400 mg/L Ni, and the separation factor of Co(II) over Ni(II) was 234.4. In addition, for nonequimolar feed mixtures, 500 mg/L Co + 1000 mg/L Ni, Ni in excess, selective separation of cobalt was 99.9%, and the separation factor of Co was 506 in the same time.     

Characterization of Fenugreek (<Emphasis Type="Italic">Trigonella foenum-graecum</Emphasis>) Seed Lipids

The composition and content of lipids, fatty acids, triacylglycerols, tocopherols and sterols in nine fenugreek genotypes were analyzed. Lipid content in fenugreek seeds ranged from 5.8 to 15.2%. Major fatty acids were: linoleic acid (45.1–47.5%), α-linolenic (18.3–22.8%), oleic (12.4–17.0%), palmitic (9.8–11.2%) and stearic (3.8–4.2%) acids. The ratios of n-6 to n-3 fatty acids were between 2.1 and 2.7. Similar fatty acid distribution was observed in all analyzed samples with some deviations. α-Tocopherol was the predominant component found in the fenugreek lipid antioxidants, and it constituted over 84% of the total amounts of tocopherols. It amounts ranged from 620 to 910 mg/kg lipids. β-Sitosterol was the major sterol in all samples, varying from 14,203 to 18,833 mg/kg of lipids. Campesterol and cycloartenol were other major sterols, and these compounds including β-sitosterol constituted 56–72% of all sterols. Fenugreek seed lipids consisted predominantly triunsaturated (56.9–66.5%) and diunsaturated (32.2–41.6%) triacylglycerides. Among these components trilinolein (LLL; 12.9–20.5%) dominated followed by PLL (14.0–20.4%), LnLnO (7.8–17.7%), PLO (5.7–11.6%), OLL (6.9–10.6%), LLLn (3.2–9.6%), and LnLnL (3.5–7.6%). Results of the study show that fenugreek seed lipids may be a source of a nutraceutical ingredient for food applications.     

Online monitoring of diallyldimethylammonium chloride polymerization

Diallyldimethylammonium chloride, which is an acidic salt with numerous applications, was polymerized in water at three different monomer concentrations and at three different pHs which the monomer is in charged form. Reactions were investigated by the automatic continuous online monitoring of polymerization technique. Conversion, molecular weight, and reduced viscosity were monitored. The reaction is found to be second‐order with respect to monomer. Rate constants and molecular weights tend to increase with pH and concentration. POLYM. ENG. SCI., 54:1350–1356, 2014. © 2013 Society of Plastics Engineers     

Chemical Profile and Biological Activities of Two Edible Plants: Chemical Investigation and Quantitative Analysis Using Liquid Chromatography Tandem Mass Spectrometry and Gas Chromatography Mass Spectrometry

The objectives of this study were to define the phenolic and fatty acid profiles, anticholinesterase, antioxidant, antimicrobial activities, and total phenolic-flavonoid contents of Lycopsis orientalis and Tragopogon latifolius var. angustifolius which have been used as food source and food supplement in Anatolia and have never been examined before. Rosmarinic and quinic acids (21.11 and 11.46 mg g^–1 extract, respectively) were found to be the most abundant constituents in L. orientalis and T. latifolius var. angustifolius among the studied 27 compounds by liquid chromatography tandem mass spectrometry. In the fatty acid compositions of L. orientalis and T. latifolius var. angustifolius that were determined by gas chromatography mass spectrometry, oleic (29.1%) and palmitic (28.7%) acids were identified as the major components, respectively. The high antioxidant activity of the methanol extract of L. orientalis shows parallelism to its rosmarinic acid content. Besides, this extract showed medium anticholinesterase activity. The results of the present study proves that the L. orientalis might also be used as a food source due to its high phenolic acid content and strong antioxidant property.