An investigation of normal and submerged condition on microstructural and tribological properties of friction stir processed AZ91-D magnesium alloy

A comparative study of micro-structural transformations and tribological properties of the friction stir processed AZ91-D magnesium (Mg) alloy in normal friction stir processing (NFSP) and submerged friction stir processing (SFSP) conditions was carried out. The optimum parameters used for processing were tool rotational speed of 1000?rpm/min, 50?mm/min of transverse speed and 6 numbers of passes. A significant reduction in grain size (28.7% and 13.1%) and increase in micro-hardness (14.55% and 8.92%) along depth and width of stir zone (SZ) of SFSPed specimen has been achieved as compared to NFSPed specimens. This change can be attributed to the dynamic recrystallisation and removal of excess frictional heat leading to inhibited post-grain growth in the processed alloy. Pin-on-disc sliding wear testing was conducted to compare the wear performance of NFSPed and SFSPed specimens. The SFSPed specimen has shown an improved wear resistance as compared to NFSPed specimens. The major prevailing wear mechanisms were abrasion, delamination, oxidation and mild plastic deformation.     

Effects of Post-Weld Heat Treatment on the Microstructure and Toughness of Flash Butt Welded High-Strength Low-Alloy Steel

Metallurgical and Materials Transactions A - Effect of post-weld heat treatment on the weld microstructure, texture, and its correlation to the toughness of flash butt welded joints were...     

A meta-heuristic cuckoo search and eigen permutation approach for model order reduction

In this paper, a new model order reduction technique is presented by combining the benefits of the meta-heuristic cuckoo search optimization and Eigen permutation methods for order reduction of higher order continuous-time systems. In the proposed approach, the numerator and the denominator polynomials of reduced order model are determined by Cuckoo search and Eigen permutation approaches, respectively. The proposed approach preserves the stability of the original system into the lower order model as the Eigen permutation retains the dominant pole with simultaneous cluster formation of the remaining real and complex poles. The effectiveness of the proposed method is validated by single-input single-output and multiple-inputs multiple-outputs numerical examples.     

Thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine on the basis of a new isentropic exponent

The thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine is presented in this paper, on the basis of a new (harmonic mean) isentropic exponent. An analytical expression is derived for the optimum pressure ratio and maximum non-dimensional net work output. It is found that the optimum pressure ratio and the maximum non-dimensional net work are high when the ratio of extreme temperatures of cycle (i.e. T _max and T _min) and isentropic efficiencies of compressor and turbine (i.e. η_c and η_t) are high. The theoretical results are also compared with the practical conditions of power plant.     

Link Estimation and Routing in Sensor Network Backbones: Beacon-Based or Data-Driven?

In the context of IEEE 802.11b network testbeds, we examine the differences between unicast and broadcast link properties, and we show the inherent difficulties in precisely estimating unicast link properties via those of broadcast beacons even if we make the length and transmission rate of beacons be the same as those of data packets. To circumvent the difficulties in link estimation, we propose to estimate unicast link properties directly via data traffic itself without using periodic beacons. To this end, we design a data-driven routing protocol Learn-on-the-Fly (LOF). LOF chooses routes based on ETX/ETT-type metrics, but the metrics are estimated via MAC feedback for unicast data transmission instead of broadcast beacons. Using a realistic sensor network traffic trace and an 802.11b testbed of ~195 Stargates, we experimentally compare the performance of LOF with that of beacon-based protocols, represented by the geography-unaware ETX and the geography-based PRD. We find that LOF reduces end-to-end MAC latency by a factor of 3, enhances energy efficiency by a factor up to 2.37, and improves network throughput by a factor up to 7.78, which demonstrate the feasibility and the potential benefits of data-driven link estimation and routing.     

Towards Strong Nonapproximability Results in the Lov��sz-Schrijver Hierarchy

Lovász and Schrijver described a generic method of tightening the LP and SDP relaxation for any 0–1 optimization problem. These tightened relaxations were the basis of several celebrated approximation algorithms (such as for max-cut, max-3sat, and sparsest cut).     

A student project for layered network protocol development

A student project to accompany a course on computer interfacing and local area networks is described. The audience at which the course is aimed consists of beginning graduate students and seniors. The course addresses fundamental concepts in computer networks in general, and local networks in particular. Students are given the specification of a simple sliding window protocol that provides sequence control and error recovery over an unreliable data link. The task is to implement this protocol on the Apple Macintosh computer as a Layer-3 protocol using the services of the link access protocol (Layer 2) already existent on the machine as part of the Appletalk network. Typical implementations and the cost of benefits of utilizing inexpensive microcomputers for projects in the field of computer networks are discussed     

Protonic polymer gel electrolytes based on carboxylic acids: ortho and inductive effects

The conductivity of polymer gel electrolytes containing three aromatic and three aliphatic carboxylic acids has been studied, viz. (i) ortho-, meta- and para-hydroxybenzoic acids and (ii) oxalic, malonic and succinic acids. Polymeric gels were prepared by adding different wt% of polymer poly(methylmethacrylate) (PMMA) in solutions of respective acids in high dielectric constant organic solvent mixtures of propylene carbonate, ethylene carbonate and dimethylformamide. The highest conductivity in the first of the above group of acids is for o-hydroxy benzoic acid and oxalic acid in the second group of acids. Results have been explained on the basis of ortho and/or inductive effects which depend upon the relative positions of the substituted hydroxyl (–OH) and carboxyl (–COOH) group or that of the two carboxylic groups.     

Modeling the anomalous threshold voltage behavior of submicrometerMOSFET's

A simple yet accurate semi-empirical analytical model for simulating the anomalous threshold voltage behavior in submicrometer MOSFETs is reported. The increase in the threshold voltage with decreasing channel length has been modeled by assuming a bias-independent, but channel-length-dependent, fixed charge at the source and drain ends. The new model requires two extra parameters in addition to the usual short-channel threshold voltage model parameters. These two parameters represent the magnitude of the fixed charge and the length over which the charge is spread at the source and drain ends. The model shows excellent agreement with the experimental threshold voltage data (within 2%) for submicrometer devices with varying oxide thickness, junction depth, and channel doping concentration