3GPP LTE‐Assisted Wi‐Fi‐Direct: Trial Implementation of Live D2D Technology

This paper is a first‐hand summary on our comprehensive live trial of cellular‐assisted device‐to‐device (D2D) communications currently being ratified by the standards community for next‐generation mobile broadband networks. In our test implementation, we employ a full‐featured 3GPP LTE network deployment and augment it with all necessary support to provide real‐time D2D connectivity over emerging Wi‐Fi‐Direct (WFD) technology. As a result, our LTE‐assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real‐world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE‐assisted WFD solutions and associated operational ranges.     

The aquathermolysis of heavy oil from Riphean-Vendian complex with iron-based catalyst: FT-IR spectroscopy data

In this paper, we investigated the influence of steam treatment on structural group composition of resins and asphaltenes of heavy oil. The object of investigation was oil-saturated rocks from Riphean-Vendian complex. The extracted crude oil was determined as a high-viscous fluid. The resins and asphaltenes destructed in a small extent due to thermal treatment. The oil-soluble iron-based catalyst intensified the destructive processes. The content of sulfur compounds (-SO) in resins and asphaltenes drastically decreased due to reduction reaction of sulfoxide to sulfide and hydrogen sulfide. The results showed that catalytic aquathermolysis, even at low temperature ranges, promoted the cracking reaction of most macromolecular components and increased the content of light fractions of heavy oil. Consequently, it reduced its viscosity.     

Discontinuous Coarsening of Tetragonal Precipitates in Partially Stabilized Zirconia Induced by Diffusional Coherency Strain under Applied Stress

When partially stabilized zirconia with 6 mol% MgO and 4 mol% CaO is aged at 1450°C, intragranular precipitation occurs and concurrently the boundaries between the grains migrate, forming a Ca-enriched precipitate-free cubic phase and large tetragonal precipitates behind them. At these compositions and temperature the boundary migration is rapid and shows the characteristics of a discontinuous coarsening. A uniaxial compressive stress applied to this specimen during the aging treatment increases or decreases the migration rate of the boundaries parallel or perpendicular to the stress axis, respectively, in agreement with the prediction that a compressive coherency strain due to the diffusion of Ca atoms is produced at the surface of the retreating grains and drives the migration. The diffusional coherency strain energy is thus expected to be the dominant driving force for the discontinuous coarsening in this solid.     

Nanoneedle Platforms: The Many Ways to Pierce the Cell Membrane

Establishing techniques to efficiently and nondestructively access the intracellular milieu is essential for many biomedical and scientific applications, ranging from drug delivery, to electrical recording, to biochemical detection. Cell penetration using nanoneedle arrays is currently a research focus area because it not only meets the increasing therapeutic demands of cell modifications and genome editing, but also provides an ideal platform for tracking long‐term intracellular information. Although the precise mechanism driving membrane penetration by nanoneedle arrays is still unclear, the low cytotoxicity, wide range of delivered materials, diverse cell type targets, and simple material structures of nanoneedle arrays make these splendid platforms for cell access. Here, the recent progress in this field is reviewed by examining device architectures and discussing mechanisms for nanoneedle penetration, and the major studies demonstrating the most general applicability of nanoneedle arrays, typical methodologies to access the intracellular environment using nanoneedles with spontaneous or assisted penetration modes, as well as biosafety aspects are presented. This review should be valuable for deeply understanding the materials fabrication principles, device designs, cell penetration methodologies, biosafety aspects, and application strategies of nanoneedle array‐based systems that are of crucial importance for the development of future practical biomedical platforms.     

Characteristics of mince from pond-bred silvercarp (Hypophthalmichthys molitrix) and preliminary experiments on its use in sausages

The quality of fresh, chilled and frozen mince made from the flesh of pond-bred silvercarp (Hypophthalmichthys molitrix (Val)) was evaluated. Flavour panel scores for all minces were acceptable and this quality did not deteriorate during storage for one week in a domestic refrigerator (5–6°C) or for one year at ?20°C. The levels of oxidative rancidity (2-thiobarbituric acid analysis) in the minces were consistent with this maintenance of quality. Aerobic plate counts at 25°C of fresh mince rose from 7–9 × 10⁴ to 1.1 × 10⁵ after 6 days' storage at 5–6°C. Coliform and psychrotroph counts rose from 1.0 × 10¹ and 7–8 × 10³ to 5–4 × 10² and 1.3 × 10⁴, respectively. The functional and textural properties of pond-bred silvercarp mince in terms of salt-soluble protein content, water binding capacity and penetrometer values were measured on fresh, refrigerated and frozen samples. All-fish sausages and frankfurters developed from pond-bred silvercarp mince were assessed in laboratory and consumer tests against commercial beef sausages and frankfurters. The fish products competed well and achieved levels of acceptance similar to those of the beef-containing products. Texture measurements revealed slight changes in the fish products during storage for 7 days at 5–6°C. No spoilage was detected in any of the products after a week at 5–6°C. The nutritional advantages of the fish sausages and frankfurters are discussed.     

Tunable,Grating-Gated,Graphene-On-Polyimide Terahertz Modulators

An electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth is presented and it is exploited to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal grating used as a gate electrode, with an HfO₂/AlO_x gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. The authors achieve 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9–2.7 THz range. The modulator is then integrated with a multimode THz QCL. By adjusting the modulator operational bandwidth, the authors demonstrate that the graphene modulator can partially compensate the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the operational range, with 98 equidistant optical modes and a spectral coverage ~1.2 THz. This paves the way for applications in the terahertz, such as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and metrological tools for spectroscopy at THz frequencies.     

Universal Interface between Functional Oxides and Silicon

Integration of crystalline oxides with silicon provides a versatile platform to extend and advance silicon technology. The interface between oxide and Si controls the structure and functional properties of the resulting material. In particular, the formation of a submonolayer metal phase on silicon is the standard approach to stabilize the epitaxial growth of oxides. However, fundamental questions—a) whether the interface transforms in the process of the synthesis; and b) if it is possible to control the interface and its electronic structure by varying the submonolayer template—remain unanswered. The present study employs MBE synthesis of EuO and SrO on Si(001) to demonstrate that the structure of the oxide/Si interface does not depend on the type of the template, its symmetry, and stoichiometry. Chemical transformations of the templates converging into the same 2D product are detected in situ by electron diffraction. Then, the common interfacial structure of 1D periodicity is visualized by high-resolution electron microscopy. The study provides insights into the process of oxide integration with silicon but also sets the limits in designing oxide/Si interfaces.     

采用电子束检测技术辅助晶体管开发

涉足尖端技术研究工作的芯片制造商正在把无数新材料和奇特的器件结构结合起来,用于65nm及更低节点的量产。同时他们发现,在这些研究上的努力生产的结果还包括目前必须着手解决各器件各个层上出现的