A comprehensive simulation model for immunity prediction in integrated circuits with respect to substrate injection

This paper presents a comprehensive modelling methodology for the electromagnetic immunity of integrated circuits (ICs) to direct power injection (DPI). The aim of this study is to predict the susceptibility of ICs by the means of simulations performed on an appropriate electrical model of different integrated logic cores located in the same die. These cores are identical from a functional point of view, but differ by their design strategies. The simulation model includes the whole measurement setup as well as the integrated circuit under test, its environment (PCB, power supply) and the substrate model of each logic core. Simulation results and comparisons with measurement results demonstrate the validity of the suggested model. Moreover, they highlight the interest of the aforementioned protection strategies against electromagnetic disturbances.     

Effect of gamma irradiation and sulphitation treatments on keeping quality of white button mushroom Agaricus bisporus (J. Lge)

Gamma irradiation, alone and in combination with sulphitation, was tested for preventing the browning and maintaining the quality attributes of the white button mushrooms. Mushrooms were subjected to treatment of gamma irradiation in the dose range of 0.5–2.0 kGy and to combination treatments of sulphitation at a concentration of 0.1% potassium metabisulphite (KMS) and gamma irradiation (dose range 0.5–2.0 kGy) followed by storage at 10 ± 2 °C (RH 85%). A dose of 2.0 kGy significantly reduced the weight loss, prevented browning and mould growth. Cap and veil opening of mushrooms was delayed by 9 days and shelf life was extended by 12 days at a dose level of 2.0 kGy. Sulphitation alone at a concentration of 0.1% KMS was effective in controlling browning only upto 3 days, beyond which both browning and cap opening increased significantly ( P  ≤ 0.05) and the samples were unacceptable after 6 days of storage. No synergistic effect of sulphitation and irradiation was observed with respect to the shelf-life extension of mushroom.     

The rheological properties of ketchup as a function of different hydrocolloids and temperature

The flow properties of ketchup were assessed upon addition of commonly used food thickeners: guar, xanthan and CMC gum at three different concentrations (0.5%, 0.75% and 1%) and four temperatures (25, 35, 45 and 55 °C). The ketchup without supplementation served as a control. All ketchup formulations exhibited non-Newtonian, pseudoplastic behaviour at all temperatures and hydrocolloid levels. The Power-law and Herschel-Buckley model were successfully applied to fit the shear stress versus shear rate data. The flow behaviour indices, n and n' , varied in the range of 0.189–0.228 and 0.216–0.263, respectively. The consistency coefficients, k and k' , were in the range of 8.42–27.22 and 6.56–20.10 Pa s ⁿ , respectively. The addition of hydrocolloids increased the yield point (τ₀) and apparent viscosity of the ketchup in comparison to that of the control. The Arrhenius equation was successfully used to describe the effects of temperature on the apparent viscosity of the prepared formulations. The E _a value appeared in the range between 5492.6 and 21475.8 J mol⁻¹.     

Plasma lipoproteins and liver lipids in two breeds of geese with different susceptibility to hepatic steatosis: Changes induced by development and force-feeding

Susceptibility to fatty liver in the force-fed goose is partly under genetic control. However, the mechanisms leading to liver steatosis in this avian model are poorly understood, but may involve perturbation in hepatic lipoprotein synthesis. Plasma lipoproteins were fractionated by density gradient ultracentrifugation from plasma of geese differing in their susceptibility to liver steatosis (Landes breed, highly susceptible; Rhine breed, partly resistant). The concentrations and chemical compositions of the major lipoprotein classes (VLDL, IDL, LDL and HDL) were characterized at 8, 22 and 27 wk of age and compared to the lipid composition of the corresponding liver. In non-force-fed geese, the lipoprotein profile was typical of birds, with high-density lipoprotein (HDL) predominating (4–5 g/L). However, at 22 and 27 wk of age, very low-density lipoprotein (VLDL) levels were significantly lower in Landes geese suggesting that this breed may possess a lower ability to export liver lipids, which would explain its susceptibility to liver steatosis when overfed. The livers of force-fed geese were specifically enriched in triglyceride, and to a lesser extent, in cholesteryl esters and non-esterified fatty acids as compared to those of control geese of the same age (27 wk). This accumulation of lipids was more pronounced in the Landes breed and was responsible for the higher liver weight in that breed. In both breeds, liver steatosis was accompanied by an increase in plasma levels of HDL (11 g/L), whereas low-density lipoproteins were essentially absent. An increase in VLDL plasma levels occurred in the Landes breed only (2.51 g/Lvs 1.85 g/L in the Rhine breed), and was positively correlated with liver weight. However, VLDL in force-fed geese in both breeds were deficient in triglyceride (28–29% by wt) but enriched in cholesterol (41% by wt). These results indicate that a defect in the incorporation of triglyceride into nascent hepatic VLDL may result in liver steatosis in this species.     

Antioxidant and free radical-scavenging activities of smooth hound (Mustelus mustelus) muscle protein hydrolysates obtained by gastrointestinal proteases

We have investigated the antioxidative activity of five hydrolysates from smooth hound (Mustelus mustelus) meat obtained by various gastrointestinal proteases: crude enzyme extract, low molecular weight (LMW) alkaline protease and trypsin-like protease from M. mustelus intestine, pepsin from M. mustelus stomach, and bovine trypsin.     

Finite time control of robotic manipulators with position output feedback

This paper deals with the robust finite time tracking of desired trajectories for a wide group of robotic manipulators in spite of unknown disturbances, uncertainties, and saturations of actuators while only manipulator's positions are available and its velocities are not measurable physically. A new form of chattering‐free second order fast nonsingular terminal sliding mode control scheme is introduced to design input torques for fulfilling the determined tracking objective in the adjustable total finite settling time. The proposed control algorithm is incorporated with two nonlinear observers to estimate disturbances and velocities of joints within finite settling times. The global finite time stability of the closed‐loop manipulator is analytically proved. Finally, a numerical simulation is carried out to verify the effectiveness of the designed input torques. Copyright © 2017 John Wiley & Sons, Ltd.     

State synchronization of linear and nonlinear agents in time‐varying networks

This paper studies state synchronization of homogeneous time‐varying networks with diffusive full‐state coupling or partial‐state coupling. In the case of full‐state coupling, linear agents as well as a class of nonlinear time‐varying agents are considered. In the case of partial‐state coupling, we only consider linear agents, but, in contrast with the literature, we do not require the agents in the network to be minimum phase or at most weakly unstable. In both cases, the network is time‐varying in the sense that the network graph switches within an infinite set of graphs with arbitrarily small dwell time. A purely decentralized linear static protocol is designed for agents in the network with full‐state coupling. For partial‐state coupling, a linear dynamic protocol is designed for agents in the network while using additional communication among controller variables using the same network. In both cases, the design is based on a high‐gain methodology. Copyright © 2017 John Wiley & Sons, Ltd.     

Improved hydrological projections and reservoir management in the Upper Indus Basin under the changing climate

The availability of water resources plays an important role for the economy of a country. The nexus of energy‐food‐water are interlinked and of particular importance in the uncertain environment of developing countries. In Pakistan, agriculture contributes 25% to the gross domestic product. The Indus River contributes 44% of the available water to irrigation of crops and the ecosystem, and currently produces 5,112 MW electricity, with the potential to produce 38,602 MW electricity. This makes it important to investigate the status of water availability in the Upper Indus Basin under existing emission scenarios. In this study, the future availability of water is projected for the Indus River under the A2, B2, RCP4.5 and RCP8.5 emission scenarios. A meta‐analysis has been conducted to present a combined picture by combining the results from the emission scenarios. Our meta‐analysis shows higher confidence in RCPs projections. The results show that suffcient water will be available in the Indus River that will meet the demands of water in future but there will be scarcity of water in some months under each scenario. However, by proper management and optimum utilisation of the available water, this scarcity can be resolved.     

Indoor mould growth prediction using coupled computational fluid dynamics and mould growth model

This study investigates, using in-situ and numerical simulation experiments, airflow and hygrothermal distribution in a mechanically ventilated academic research facility with known cases of microbial proliferations. Microclimate parameters were obtained from in-situ experiments and used as boundary conditions and validation of the numerical experiments with a commercial computational fluid dynamics (CFD) analysis tool using the standard k–ε model. Good agreements were obtained with less than 10% deviations between the measured and simulated results. Subsequent upon successful validation, the model was used to investigate hygrothermal and airflow profile within the shelves holding stored components in the facility. The predicted in-shelf hygrothermal profile was superimposed on mould growth limiting curve earlier documented in the literature. Results revealed the growth of xerophilic species in most parts of the shelves. The mould growth prediction was found in correlation with the microbial investigation in the case-studied room reported by the authors elsewhere. Satisfactory prediction of mould growth in the room successfully proved that the CFD simulation can be used to investigate the conditions that lead to microbial growth in the indoor environment.     

Cyclic behavior of concentrically braced frames with built-up braces composed of channel sections

Concentrically braced frames are earthquake resistant systems commonly used in buildings. Seismic behavior of this type of structures is affected by their configurations, brace properties, and brace to gusset plate connections. In this paper, the results of three experiments conducted to investigate the cyclic behavior of concentrically braced frames with braces built-up of double channels are reported. Significant damage was observed in beam to column connections. Large out of plane deformation of braces caused some cracks in the connector welds; however they did not result in fracture. Although large drift was applied to the frames, no brace fracture was observed. Furthermore, experiments showed that the majority of compressive strength in post-buckling state and a noticeable portion of tensile strength originated from frame action. By choosing connector spacing as the main parameter and using finite element models, a parametric study was performed to investigate the effect of this parameter on this type of frames with two different details of brace to gusset plate connections. It is observed that reducing the connector spacing increases the inelastic strain demand in braces and decreases it in gusset plates. However, gusset plates, which accommodate 2t linear clearance, are less dependent on connector spacing, compared to those accommodating 6t elliptical clearance. It seems that the limitations of slenderness ratio of individual section, stipulated in current seismic provisions, need further study.