One-pot synthesis of hematite-alumina hollow sphere composite by ultrasonic spray pyrolysis technique with high adsorption capacity toward PAHs

A hybrid nanocomposite of alumina and hematite was synthesized by ultrasonic spray pyrolysis technique. The study of microscopic images, mapping analysis, and XRD patterns revealed that the Al₂O₃ – Fe₂O₃ nanocomposite was composed of separated spherical particles with a thin layer ball-shaped structure that metal oxides are uniformly distributed in the wall of hollow sphere particles, led to a coherent and monotonous construction. A series of coefficients of equilibrium sorption of polycyclic aromatic hydrocarbons (PAHs) as hazardous materials were measured on the prepared composite material in a batch technique. The free or pure Al₂O₃ or Fe₂O₃ showed negligible removal efficiency for the mentioned analytes. The various significant variables, such as initial analyte concentration, solution pH, adsorbent dose, and contact time to remove analyte, were studied in the aqueous solutions. Adsorption data were modeled to Langmuir, Freundlich, and Temkin isotherms, and a good correlation found in the case of Langmuir isotherm and adsorption capacity for anthracene, phenanthrene, and naphthalene were 370, 333, and 322 mg g^?1, respectively. Investigation of the kinetic models proved a pseudo-second-order, and the prepared adsorbent can be reused more than 7 times without a significant decrease of adsorption performance.     

Effect of pre‐germination time of brown rice on serum cholesterol levels of hypercholesterolaemic rats

BACKGROUND: Brown rice is unpolished rice with immeasurable benefits for human health. Brown rice (BR) and pre‐germinated brown rice (PGBR) are known to contain various functional compounds such as γ‐oryzanol, dietary fibre and γ‐aminobutyric acid (GABA). In the present study, the experimental diets containing BR and PGBR (24, 48 h pre‐germination) were used to investigate the influence of pre‐germination time of brown rice on blood cholesterol in Sprague–Dawley male rats. RESULTS: Hypercholesterolaemia and elevation of LDL‐cholesterol were successfully ameliorated by the experimental diets containing BR and PGBR (24 and 48 h pre‐germination). As compared to the control sample, the pre‐germination time had a significant (P < 0.05) effect on blood cholesterol of Sprague–Dawley male rats. It was also found that the significantly (P < 0.05) better effect on lipid profile of hypercholesterolaemic rats was observed by prolonging the pre‐germination time. As compared to non‐germinated brown rice, the germinated brown rice showed the higher cardio‐protective effect on hypercholesterolaemic Sprague–Dawley male rats. CONCLUSION: The present study suggests that the changes of blood cholesterol can be mainly modulated by using the PGBR rather than BR. The prolonging of pre‐germination time led to an increase in the bioactive components, thereby providing a more efficient functional diet affecting the high blood cholesterol. This study suggests that PGBR can be used instead of BR and polished rice in the human diet. Copyright © 2009 Society of Chemical Industry     

AZ31-O镁合金和6061-T6铝合金搅拌摩擦焊接头的显微组织和力学性能(英文)

对3 mm厚的AZ31-O镁合金板和6061-T6铝合金板进行异种材料搅拌摩擦焊。实验中搅拌针的旋转速度为600~1400 r/min,前进速度为20~60 mm/min。结果表明,在旋转速度1000 r/min、前进速度40 mm/min的工艺条件下,可以获得无缺陷的焊接接头。组织观察发现搅拌区的晶粒尺寸要比基材区的明显小很多。在搅拌区形成了复杂的金属流动。显微硬度测试表明搅拌区的硬度分别是不均匀的。拉伸实验结果表明,接头的拉伸强度约为基材AZ31镁合金的76%,或6061铝合金的60%。接头拉伸断口SEM形貌观察表明为脆性断裂。     

Facility location dynamics: An overview of classifications and applications

In order to modify the current facility or develop a new facility, the dynamics of facility location problems (FLPs) ought to be taken into account so as to efficiently deal with changing parameters such as market demand, internal and external factors, and populations. Since FLPs have a strategic or long-term essence, the inherited uncertainty of future parameters must be incorporated in relevant models, so these models can be considered applicable and ready to implement. Furthermore, due to largely capital outlaid, location or relocation of facilities is basically considered as a long-term planning. Hence, regarding the way in which relevant criteria will change over time, decision makers not only are concerned about the operability and profitability of facilities for an extended period, but also seek to robust locations fitting well with variable demands. Concerning this fact, a trade-off should be set between benefits brought by facility location changes and costs incurred by possible modifications. This review reports on literature pointing out some aspects and characteristics of the dynamics of FLPs. In fact, this paper aims not only to review most variants of these problems, but also to provide a broad overview of their mathematical formulations as well as case studies that have been studied by the literature. Finally, based on classified research works and available gaps in the literature, some possible research trends will be pointed out.     

Stabilisation of discrete-time polynomial fuzzy systems via a polynomial lyapunov approach

This paper deals with the problem of designing a controller for a class of discrete-time nonlinear systems which is represented by discrete-time polynomial fuzzy model. Most of the existing control design methods for discrete-time fuzzy polynomial systems cannot guarantee their Lyapunov function to be a radially unbounded polynomial function, hence the global stability cannot be assured. The proposed control design in this paper guarantees a radially unbounded polynomial Lyapunov functions which ensures global stability. In the proposed design, state feedback structure is considered and non-convexity problem is solved by incorporating an integrator into the controller. Sufficient conditions of stability are derived in terms of polynomial matrix inequalities which are solved via SOSTOOLS in MATLAB. A numerical example is presented to illustrate the effectiveness of the proposed controller.     

Automatic computer-aided caries detection from dental x-ray images using intelligent level set

Multimedia Tools and Applications - Dental diseases have high risk of affection across the globe and mostly in adult population. The analysis of dental X-ray images has some difficulties in...     

H∞ Controller design for spectral MIMO models by convex optimization

A new method for robust fixed-order H_∞ controller design by convex optimization for multivariable systems is investigated. Linear Time-Invariant Multi-Input Multi-Output (LTI-MIMO) systems represented by a set of complex values in the frequency domain are considered. It is shown that the Generalized Nyquist Stability criterion can be approximated by a set of convex constraints with respect to the parameters of a multivariable linearly parameterized controller in the Nyquist diagram. The diagonal elements of the controller are tuned to satisfy the desired performances, while simultaneously, the off-diagonal elements are designed to decouple the system. Multimodel uncertainty can be directly considered in the proposed approach by increasing the number of constraints. The simulation examples illustrate the effectiveness of the proposed approach.     

Leaching of a zinc ore and concentrate using the Geocoat™ technology

In this study, the Geocoat™ technology was used for the extraction of zinc from a mineral concentrate obtained from the Kooshk mine (Yazd, Iran) by a culture dominated by the mesophilic bacterium Acidithiobacillusferrooxidans in a packed column bioreactor. A low grade sphalerite ore was used as support for the concentrate coating. During the 100 days of leaching pH, Fe³⁺, Fe^total, microbial population density and zinc extraction were measured. The final zinc extraction from concentrate and low grade support was 97% and 78%, respectively, and it was found that leaching from the support does not proceed significantly before leaching from the coating is completed.     

Dual-Function Semaphorin 4D Released by Platelets: Suppression of Osteoblastogenesis and Promotion of Osteoclastogenesis

Effects of the antiosteoblastogenesis factor Semaphorin 4D (Sema4D), expressed by thrombin-activated platelets (TPs), on osteoblastogenesis, as well as osteoclastogenesis, were investigated in vitro. Intact platelets released both Sema4D and IGF-1. However, in response to stimulation with thrombin, platelets upregulated the release of Sema4D, but not IGF-1. Anti-Sema4D-neutralizing monoclonal antibody (mAb) upregulated TP-mediated osteoblastogenesis in MC3T3-E1 osteoblast precursors. MC3T3-E1 cells exposed to TPs induced phosphorylation of Akt and ERK further upregulated by the addition of anti-sema4D-mAb, suggesting the suppressive effects of TP-expressing Sema4D on osteoblastogenesis. On the other hand, TPs promoted RANKL-mediated osteoclastogenesis in the primary culture of bone-marrow-derived mononuclear cells (BMMCs). Among the known three receptors of Sema4D, including Plexin B1, Plexin B2 and CD72, little Plexin B2 was detected, and no Plexin B1 was detected, but a high level of CD72 mRNA was detected in RANKL-stimulated BMMCs by qPCR. Both anti-Sema4D-mAb and anti-CD72-mAb suppressed RANKL-induced osteoclast formation and bone resorptive activity, suggesting that Sema4D released by TPs promotes osteoclastogenesis via ligation to a CD72 receptor. This study demonstrated that Sema4D released by TPs suppresses osteogenic activity and promotes osteoclastogenesis, suggesting the novel property of platelets in bone-remodeling processes.     

CFD study of non-premixed swirling burners: Effect of turbulence models

This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion.