Incorporating Nano-silica as a Binder to Improve Corrosion Resistance of High Alumina Refractory Castables

In this study, four types of castables as calcium-aluminate cement (CAC)-bonded and nano-silica (NS)-bonded castables based on tabular-alumina and bauxite aggregates were prepared to investigate the replacement of the calcium-aluminate cement by NS. All samples were allowed to dry at 110 °C then fired at 800 and 1200 °C. Bulk density and apparent porosity of samples were measured. The molten aluminum static corrosion test (cup test) results showed that NS-bonded specimens had higher resistance to corrosion compared to CAC-bonded samples (based on the measured average aluminum penetration depth into the refractory texture). However no penetration was observed in bauxite NS-bonded samples. The results were consistent with dynamic corrosion test in aluminum melt carried out at 800 °C for 100 h. The small pore size in NS-bonded castables was found to be the main cause for high corrosion resistance as micro-pores prevented the melt to penetrate into the refractory.     

Targeted design of polyaniline-graphene oxide,barium-strontium titanate,hard-soft ferrite,and polyester multi-phase nanocomposite for highly efficient microwave absorption

The current paper focuses on synthesizing a high-efficiency microwave absorber via incorporating the nanofillers of graphene oxide-polyaniline (GO-PANI), barium-strontium titanate (BST), and soft-hard ferrite within the polyester matrix. The nanocomposite magnets of (Ba_0.5Sr_0.5Fe₁₂O₁₉)_1-x hard/(CoFe₂O₄)_x soft (x = 0.2, 0.5, and 0.8) were prepared using sol-gel auto-combustion method. The GO-PANI and BST were successfully synthesized by in situ polymerization and improved polymerization, respectively. The phase structure, chemical structure, morphology, and microwave absorption properties of the synthesized nanocomposites were characterized by X-ray diffractometer (XRD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM), vector network analyzer (VNA) techniques, respectively. The results showed that the synergistic effects of the combination of dielectric (BST), conductive (GO-PANI), and magnetic materials (hard-soft ferrites) provided the reflection loss values of less than ?20 dB (>99% absorption) in the X-band region. The minimum reflection loss of ?35 dB (>99.99% absorption) was obtained by the optimal formulation including (Ba_0.5Sr_0.5Fe₁₂O₁₉)_0.2 (CoFe₂O₄)_0.8, and the weight ratio of 1: 2 for both BST/soft-hard ferrite and hard-soft ferrite + BST/GO-PANI with the thickness of 1 mm. According to the results, the thickness factor plays a key role in improving the impedance matching. Consequently, the proposed nanocomposite can be employed as a novel kind of microwave absorbers with good impendence matching and high absorption.     

Salt-assisted solution combustion synthesis of NiFe2O4: Effect of salt type

The effects of three types of salt including NaF, KCl, and NaCl on the properties of NiFe₂O₄ nanoparticles using salt-assisted solution combustion synthesis (SSCS) have been investigated. The synthesized powders were evaluated by SEM, TEM, FTIR, XRD, and VSM analysis. Also, the specific surface area (SSA), as well as size distribution and volume of the porosities of NiFe₂O₄ powders were determined by the BET apparatus. The visual observations showed that the intensity and time of combustion synthesis of nanoparticles have been severely influenced by the type of salt. The highest crystallinity was observed in the synthesized powder using NaCl. The SSA has also been correlated completely to the type of salt. The quantities of SSA was achieved about 91.62, 64.88, and 47.22 m²g^-1 for the powders synthesized by KCl, NaCl, and NaF respectively. Although the magnetic hysteresis loops showed the soft ferromagnetic behavior of the NiFe₂O₄ nanoparticles in all conditions, KCl salt could produce the particles with the least coercivity and remanent magnetization. Based on the present study, the salt type is a key parameter in the SSCS process for the preparation of spinel ferrites. Thermodynamic evaluation also showed that the melting point and heat capacity are important parameters for the proper selection of the salt.     

Optical properties of multi-stacked BaTiO3/SrTiO3 thin films synthesized via chemical method

In this work, the BaTiO₃ and SrTiO₃ thin films as well as BaTiO₃/SrTiO₃ lamellar composites are synthesized via sol-gel spin-coating method. The formation of corresponding phases from their sols is investigated by virtue of X-ray diffraction on their powders, which confirms the formation of tetragonal structure for BaTiO₃, but cubic structure for SrTiO₃. The field emission scanning electron microscopy images show that crack-free films with different morphologies are formed in each sample. Likewise, by changing periodicity of the samples, the morphology of the composite samples is changed. As the number of layers increases from 1 to 20, the band gap reduces from 4.38 eV to 4.10 eV for BaTiO₃ samples and from 4.13 eV to 3.80 eV for SrTiO₃ samples confirmed by UV–Vis spectra. The band gap of periodicity = 1 sample is higher than that of BaTiO₃, while band gaps of periodicity = 2 and 5 composites mount between those of BaTiO₃ and SrTiO₃. In addition, the refractive indices of multi-stacked composites are about 0.2 lesser than refractive indices of BaTiO₃ sample in high wavelengths. The periodicity dependence of optical frequency dielectric constant, dielectric loss, impedance, Urbach tail, extinction coefficient, and electric modulus of multi-stacked composites are also studied.     

Poly(acrylic acid)/gum arabic/ZnO semi-IPN hydrogels: synthesis,characterization and their optimizations by response surface methodology

Iranian Polymer Journal - Synthesis of novel semi-interpenetrating poly(acrylic acid) (PAA)/gum arabic (AG)/ZnO hydrogels by in situ free radical polymerization was optimized using response surface...     

Prediction of bulk modulus and volumetric expansion coefficient of water for leak tightness test of pipelines

To determine whether any pressure variation in pipeline hydrostatic test is a result of temperature changes or the presence of leaks, the calculation of pressure/temperature changes is required for test sections. In these calculations, bulk modulus and volumetric expansion coefficient of fresh or sea water must be taken into account. In this study, a simple-to-use correlation is developed to predict the bulk modulus and volumetric expansion coefficient of both fresh and sea water as a function of temperature and pressure. The proposed correlation helps to cover the bulk modulus and volumetric expansion coefficient of both fresh and sea water for temperatures less than 50 °C (40 °C for sea water) as well as pressures up to 55,000 kPa (550 bar). The results can be used in follow-up calculations to determine whether any pressure variation in pipeline hydrostatic test is a result of temperature changes or the presence of leaks. The proposed correlation showed promising results with average absolute deviations for volumetric expansion coefficient and bulk modulus of water being around 0.58% and 0.08% respectively. The novel correlation is easy to use and will prove to be of immense value for project engineers to test the critical limits accurately.     

Optimization of Water Distribution Networks Using Integer Linear Programming

In this study optimum design of municipal water distribution networks for a single loading condition is determined by the branch and bound integer linear programming technique. The hydraulic and optimization analyses are linked through an iterative procedure. This procedure enables us to design a water distribution system that satisfies all required constraints with a minimum total cost. The constraints include pipe sizes, which are limited to the commercially available sizes, reservoir levels, pipe flow velocities, and nodal pressures. Accuracy of the developed model has been assessed using a network with limited solution alternatives, the optimal solution of which can be determined without employing optimization techniques. The proposed model has also been applied to a network solved by others. Comparison of the results indicates that the accuracy and convergence of the proposed method is quite satisfactory.     

Modeling Multithreaded Applications Using Petri Nets

Since most modern computing systems contain multiple processing elements, applications are relying on multithreaded programming techniques that allow a program to execute multiple tasks concurrently to take advantage of the processing capabilities. Multithreaded programs are more difficult to design and test because of the nondeterministic execution orders and synchronization among the threads. Different approaches can be used to test Multithreaded Applications. In our approach we use Petri nets to represent the key elements of interactions among threads to identify potential problems such as race conditions, lost signals, and deadlocks. A tool called C2Petri has been developed which converts C-Pthreads programs to the equivalent Petri net model. This tool helps verification of Pthread-based programs. At present the tool has limited capabilities and we hope to expand the capabilities of our tool in the near future.