Study on micro-patterning process of vertically aligned carbon nanotubes (VACNTs)

Vertically aligned carbon nanotubes (VACNTs) have drawn significant attention by the researchers because of their nanometric size and favorable material properties. Patterning of CNT forests in the micrometric domain is very important for their application in the area of microelectromechanical system (MEMS). For the first time this paper reports, detailed experimental investigation on a post growth μ-patterning process of VACNT forests. The micromechanical bending (M2B) process was locally applied at the targeted area in order to change the alignment of VACNT forests. Interestingly, the VACNT forest was transformed from typical black body absorber to reflective mirror as the M2B process was applied. Several parameters were identified that govern the resultant patterns such as rotational spindle speed, lateral bending speed, step size, tool morphology, and total depth of bend. Optimization of the parameters was carried out experimentally to obtain the best surface roughness and integrity of the microstructure. A minimum average surface roughness of Ra = 15 nm was achieved with 2000 rpm spindle speed, 1 mm/min bending speed and 1 µm step size.     

Nanoelectromechanical Chip (NELMEC) Combination of Nanoelectronics and Microfluidics to Diagnose Epithelial and Mesenchymal Circulating Tumor Cells from Leukocytes

An integrated nano‐electromechanical chip (NELMEC) has been developed for the label‐free distinguishing of both epithelial and mesenchymal circulating tumor cells (ECTCs and MCTCs, respectively) from white blood cells (WBCs). This nanoelectronic microfluidic chip fabricated by silicon micromachining can trap large single cells (>12 µm) at the opening of the analysis microchannel arrays. The nature of the captured cells is detected using silicon nanograss (SiNG) electrodes patterned at the entrance of the channels. There is an observable difference between the membrane capacitance of the ECTCs and MCTCs and that of WBCs (measured using SiNG electrodes), which is the key indication for our diagnosis. The NELMEC chip not only solves the problem of the size overlap between CTCs and WBCs but also detects MCTCs without the need for any markers or tagging processes, which has been an important problem in previously reported CTC detection systems. The great conductivity of the gold‐coated SiNG nanocontacts as well as their safe penetration into the membrane of captured cells, facilitate a precise and direct signal extraction to distinguish the type of captured cell. The results achieved from epithelial (MCF‐7) and mesenchymal (MDA‐MB231) breast cancer cells circulated in unprocessed blood suggest the significant applications for these diagnostic abilities of NELMEC.     

Integrated all-optical infrared switchable plasmonic quantum cascade laser

We report a type of infrared switchable plasmonic quantum cascade laser, in which far field light in the midwave infrared (MWIR, 6.1 μm) is modulated by a near field interaction of light in the telecommunications wavelength (1.55 μm). To achieve this all-optical switch, we used cross-polarized bowtie antennas and a centrally located germanium nanoslab. The bowtie antenna squeezes the short wavelength light into the gap region, where the germanium is placed. The perturbation of refractive index of the germanium due to the free carrier absorption produced by short wavelength light changes the optical response of the antenna and the entire laser intensity at 6.1 μm significantly. This device shows a viable method to modulate the far field of a laser through a near field interaction.     

A 3D Magnetic Hyaluronic Acid Hydrogel for Magnetomechanical Neuromodulation of Primary Dorsal Root Ganglion Neurons

Neuromodulation tools are useful to decipher and modulate neural circuitries implicated in functions and diseases. Existing electrical and chemical tools cannot offer specific neural modulation while optogenetics has limitations for deep tissue interfaces, which might be overcome by miniaturized optoelectronic devices in the future. Here, a 3D magnetic hyaluronic hydrogel is described that offers noninvasive neuromodulation via magnetomechanical stimulation of primary dorsal root ganglion (DRG) neurons. The hydrogel shares similar biochemical and biophysical properties as the extracellular matrix of spinal cord, facilitating healthy growth of functional neurites and expression of excitatory and inhibitory ion channels. By testing with different neurotoxins, and micropillar substrate deflections with electrophysical recordings, it is found that acute magnetomechanical stimulation induces calcium influx in DRG neurons primarily via endogenous, mechanosensitive TRPV4 and PIEZO2 channels. Next, capitalizing on the receptor adaptation characteristic of DRG neurons, chronic magnetomechanical stimulation is performed and found that it reduces the expression of PIEZO2 channels, which can be useful for modulating pain where mechanosensitive channels are typically overexpressed. A general strategy is thus offered for neuroscientists and material scientists to fabricate 3D magnetic biomaterials tailored to different types of excitable cells for remote magnetomechanical modulation.     

Evaluating ion diffusivity of cracked cement paste using electrical impedance spectroscopy

Cracking can significantly accelerate mass transport in concrete and as such, impact its durability. This paper is aimed at quantifying the effect of saturated cracks on ion diffusion. Electrical conductivity, measured by electrical impedance spectroscopy (EIS), was used to characterize the diffusion coefficient of fiber-reinforced cement paste disks that contained one or two through-thickness cracks. Crack widths in the range 20–100 μm were generated by controlled indirect tension test. Crack profiles were digitized and quantified by image analysis to determine crack volume fraction and average crack width. Crack connectivity (e.g., inverse of tortuosity) was calculated from the conductivity results measured by EIS. The results suggest that the diffusion coefficient of cracked samples is strongly and linearly related to the crack volume fraction; but is not directly dependent on crack width. Crack tortuosity does reduce the ion diffusion through cracks, but its impact is not very significant. Overall, the most important parameter governing ion diffusion in saturated cracked concrete is the volume fraction of cracks. Theoretical justifications of these observations are also provided.     

Prediction of ultrasonic wave velocity in particleboard and fiberboard

Ultrasonic wave velocities were determined at parallel and perpendicular to manufacturing direction and at the interval angles of 15° in clockwise and counterclockwise directions of particleboard and fiberboard. The experimental results were compared with the predicted values using some empirical formulae such as Hankinson and Jacoby equations. The results showed that the ultrasonic wave velocity were the highest in parallel direction in particleboard and fiberboard and decreases with increase of angle and the lowest values occurred in perpendicular direction. The predicted ultrasonic velocity using Hankinson and Jacoby equations are in close agreement with the measured values. Relationship between ultrasonic wave velocities and particles and fibers angle could be successfully presented by cubic and quadratic regression equations as well.     

Insiders and the law: The impact of regulatory change on insider trading

Abstract and Key Results

Application of two-dimensional spectral analysis to the evaluation of the single and joint segregation characteristics

Two-dimensional statistical functions such as spectral density function, coherence function and phase angle are used to evaluate the single and joint segregation characteristics of alloying elements. Employing the latter two functions, the joint segregation index, defined elsewhere for a one-dimensional case, is redefined for a two-dimensional one. The effects of calcium treatment on center segregation (macrosegregation) and intergranular segregation (semi-macrosegregation) of MnS in three commercial calcium treated steel slabs, continuously cast under different operating conditions, are quantified by using the joint segregation index. The results are compared with those of a slab without calcium treatment. It is shown that both center segregation and intergranular segregation of MnS in all three calcium treated slabs are suppressed as compared with the slab without calcium treatment, and that the extent of the effect depends on the casting conditions. By reasoning on the basis of two-dimensional power spectra, it is shown that in a calcium treated slab sulfur and calcium are almost uniformly distributed throughout the slab, and that in the slab without calcium treatment sulfur and manganese appear together periodically only at largely spaced positions.     

Visual comparability of 3D regular sampling and reconstruction

The Body-Centered Cubic (BCC) and Face-Centered Cubic (FCC) lattices have been analytically shown to be more efficient sampling lattices than the traditional Cartesian Cubic (CC) lattice, but there has been no estimate of their visual comparability. Two perceptual studies (each with N = 12 participants) compared the visual quality of images rendered from BCC and FCC lattices to images rendered from the CC lattice. Images were generated from two signals: the commonly used Marschner-Lobb synthetic function and a computed tomography scan of a fish tail. Observers found that BCC and FCC could produce images of comparable visual quality to CC, using 30-35 percent fewer samples. For the images used in our studies, the L(2) error metric shows high correlation with the judgement of human observers. Using the L(2) metric as a proxy, the results of the experiments appear to extend across a wide range of images and parameter choices.