Influence of dietary long-chain PUFA on premature baboon lung FA and dipalmitoyl PC composition

One of the major survival challenges of premature birth is production of lung surfactant. The lipid component of surfactant, dipalmitoyl PC (DPPC), increases in concentration in the period before normal term birth via a net shift in FA composition away from unsaturates. We investigated the influence of dietary DHA and arachidonic acid (AA) on lung FA composition and DPPC concentration in term and preterm baboons. Pregnant animals/neonates were randomized to one of four groups: breast-fed (B), term formula-fed (T⁻), preterm formulafed (P⁻), and preterm fed formula supplemented with DHA-AA (P⁺). Breast milk contained 0.68%wt DHA and the P⁺ group formula contained 0.61%wt DHA. In the preterm groups (P⁻ and P⁺), pregnant females received a course of antenatal corticosteroids. At the adjusted age of 4 wk, neonate lung tissue was harvested, and FA composition and DPPC were analyzed. Palmitate was ∼28%wt of lung total FA and no significant differences were found among the four treatment groups. In contrast, DPPC in the B group lung tissue was significantly greater than DPPC in the unsupplemented groups, but not compared with the P⁺ group. The B and P⁺ groups were not significantly different in DHA and AA, but were different compared with the unsupplemented (T, P⁻) groups. These results indicate that LCP supplementation increases lung DHA and AA, without compromising overall lung 16∶0 or DPPC. The shift in FA composition toward greater unsaturation in the groups consuming LCP supported improved surfactant lipid concentration in preterm neonate lungs.     

Morphology and thermal properties of two polymethacrylates modified by a polymer liquid crystal

We have studied blends of a polymer liquid crystal (PLC) with poly(cyclohexylethyl methacrylate) (PCHEMA) or poly(cyclohexylpropyl methacrylate) (PCHPMA). The PLC is PET/0.6PHB where PET = poly(ethylene terephthalate), PHB = p-hydroxybenzoic acid and 0.6 is the mole fraction of the latter in the copolymer. The microstructure was studied by scanning electron microscopy (SEM). PCHEMA + PLC (20 wt% of the latter, blend E) has a fine texture with LC islands evenly distributed in the matrix and good adhesion between the phases resulting from their partial miscibility. The PCHPMA + PLC (20 wt% of the latter, blend P) shows only limited compatibility. The SEM results are confirmed by values of the glass transition temperatures T_g determined via thermal mechanical analysis. The T_g value of the blend E is shifted towards the T_g of PLC; T_g of blend P is practically equal to that of PCHPMA. The linear isobaric expansivity α_L values for both blends are lower than the respective values for pure PCHPMA and PCHEMA. Thermal stabilities of the blends determined by thermogravimetry are also better than those of pure polymethacrylates. The temperature of 50% weight degradation for blend E is higher than that for pure PCHEMA by more than 60 K Copyright © 2004 Society of Chemical Industry     

The KlaperSuite framework for model-driven reliability analysis of component-based systems

Automatic prediction tools play a key role in enabling the application of non-functional requirements analysis, to simplify the selection and the assembly of components for component-based software systems, and in reducing the need for strong mathematical skills for software designers. By exploiting the paradigm of Model-Driven Engineering (MDE), it is possible to automatically transform design models into analytical models, thus enabling formal property verification. MDE is the core paradigm of the KlaperSuite framework presented in this paper, which exploits the KLAPER pivot language to fill the gap between design and analysis of component-based systems for reliability properties. KlaperSuite is a family of tools empowering designers with the ability to capture and analyze quality of service views of their systems, by building a one-click bridge towards a number of established verification instruments. In this article, we concentrate on the reliability-prediction capabilities of KlaperSuite and we evaluate them with respect to several case studies from literature and industry.     

Allelochemical resistance of bald cypress,Taxodium distichum,heartwood to the subterranean termite,Coptotermes formosanus

The heartwood of bald cypress,Taxodium distichum (L.) Rich., resisted feeding attack by the Formosan subterranean termite,Coptotermes formosanus Shiraki. Hexane-extracted heartwood, however, was consumed at > 12 times the amount of sound heartwood eaten. A bioassay usingT. distichum sapwood as a feeding substrate was employed to assess the antitermitic activity of successive hexane, acetone, and methanol extracts of heartwood shavings and isolates derived from the active hexane extract. Two fractions, eluted from the crude hexane extract by liquid chromatography, significantly reduced termite feeding compared to the parent extract, while a third fraction was less active than the original hexane extract. Each fraction contained one major component. All three components were structurally related diterpenes. The two most active heartwood constituents were identified by GC-MS and NMR as ferruginol and manool, while the third and least active, but most prevalent, compound in heartwood was identified as nezukol. Results of bioassays suggest that these allelochemicals act principally as feeding deterrents with accompanying termite mortality due to starvation.     

Invertebrate response to impacts of water diversion and flow regulation in high‐altitude tropical streams

Water supply systems are critical infrastructure that provides food and energy security for developed societies. The operation of reservoirs (flow regulation) and water intakes (water diversion) has known negative impacts on aquatic ecosystems; however, quantification of ecological impacts and examination of these two types of flow alteration remain a developing area of research. We investigated the individual and combined impact of flow regulation and water diversion on stream ecosystem integrity, the freshwater macroinvertebrate community, and the population structure of flow‐sensitive insects. For 2 years, we monitored quarterly discharge, physical and chemical stream conditions, and benthic invertebrates of four high‐altitude tropical streams that are part of the water supply system of Quito, Ecuador. Flow regulation caused a loss of the hydrological seasonality of these streams, including a decrease in stream depth and biotic quality. Water diversion caused a decrease in dissolved oxygen and overall ecosystem integrity. Freshwater invertebrate density and richness decreased as a result of water diversion and flow regulation. The combined flow alteration in these streams decreased the density of nymphal stages of the widely distributed mayfly Andesiops peruvianus. Given the societal needs for food and energy security, water management for diversion (e.g., irrigation) and in‐line storage practices (e.g., hydroelectric dams) are anticipated to increase. This research suggests that the negative environmental impacts of flow alteration could be mitigated with discharge releases designed to approximate the natural hydrologic regime of undisturbed streams.     

Moral und Abhängigkeit

Definition of the problem:

Being satisfied with one’s work depends on professional autonomy, which is attributed to the medical profession to a high degree, combined with specialized knowledge and moral authority for vital questions. That is why physicians enjoy a high reputation. At the beginning of a person's medical career, moral competence is developed nearly completely, but specialized knowledge must be learned. Hospitals, in which further medical education regularly takes place, are still traditionally hierarchically organized today. Unfortunately, feudalistic or military structures hinder autonomous moral decisions and cause structural irresponsibility.

Arguments:

Obstructions and pressure by superiors, financial restrictions, arrogance and trying to make one's mark are shown in typical conflict situations. Stress, discontent, moral conflicts and illness, even including burn out are possible. Commitment and creativity by employees are prevented and mistakes cannot be constructively managed. Thus, patients may suffer unreasonably or be hurt.

Conclusion:

There is a risk to subordinate moral principles under other interests, not only with subordinates but also with superiors. Ways to create a culture that promotes autonomy among physicians and between different professions are discussed. Therefore it is necessary to institutionalize communication based on a reciprocal high regard in a team with people treated as equal partners, who are then able to discuss moral questions in a discourse.     

Evaluation of the salt leaching method for the production of ethylene propylene diene monomer rubber foams

The thermomechanical behavior of ethylene propylene diene monomer (EPDM) foams produced with the salt leaching method has been investigated and compared with the behavior of EPDM foams obtained from conventional blowing agents. Moreover, the salt-leaching process has been optimized to minimize salt residues and the influence of different parameters (such as average particle size and particle size distribution) has been investigated. Scanning electron microscopy and density measurements highlighted that salt-leaching leads to the formation of open-cell porosity with cell dimensions of around 60 to 80 μm, while foams obtained with the two traditional foaming agents lead to closed-cell porosity. Compression set values indicate that the behavior of the foams produced with salt leaching are more similar to the unfoamed rubber, characterized by higher elasticity and low residual deformation. Two theoretical models were successfully applied to the compression curves (Mooney-Rivlin and Exponential-Logarithmic) and they highlighted the effect of foaming on the properties of EPDM rubber and in particular the higher chain extensibility obtained through the salt leaching foaming method.     

The effect of adding devulcanized rubber on the thermomechanical properties of recycled polypropylene

This work aims to investigate the effect of adding vulcanized or partially devulcanized rubbers on recycled polypropylene (PPr), considering thermomechanical and morphological properties. The study proposes to better understand how structural changes underwent by rubber (after the devulcanization) contributed to improving the mechanical properties of the PPr. The PPr/rubber blends were prepared by a co-rotating twin-screw extruder and then were injected. The blends composed of the most devulcanized rubbers by microwaves with refined microstructure showed higher values of elongation at break and toughness. Data showed that the devulcanization process applied to the rubber interfered positively in its adhesion to the PPr. Data from dynamic mechanical analysis and atomic force microscopy indicated that the most devulcanized rubbers presented an interface more connected to PPr. These chemical interactions possibly impacted the mechanical properties of the PPr. Moreover, dilatation processes favored the fracture mechanisms of the PPr when rubber was added to it.