B2C-E-Commerce als Treiber simultaner Veränderungen in IT-Struktur und Markenarchitektur

We analyze the influence of B2C e-commerce on IT structure and brand architecture based on conceptual considerations, a case study and an empirical survey. We first discuss the changes in transaction costs that are induced by B2C e-commerce. The effects of B2C e-commerce on IT structure and brand architecture, which are anticipated from a transaction cost perspective, are illustrated using a case study from the tourism industry. We conducted a quantitative study among 101 chief information officers (CIOs) and chief marketing officers (CMOs) from the most important consumer brand companies in Austria. The results of a correspondence analysis show that a high importance of e-commerce triggers a typical bundle of changes in IT structure and brand architecture, which point toward a stronger integration within and between these two structural elements. We therefore conclude that B2C e-commerce calls for a better coordination of those measures that impact IT structure and brand architecture.     

Velocity Distribution in the Roughness Layer of Rough-Bed Flows

Several models for the vertical distribution of the double-averaged (in time and in the plane parallel to the mean bed) longitudinal velocity in the flow region between roughness troughs and roughness tops are suggested. We found that the same model for velocity distribution may be applicable to a range of flow conditions and roughness types, which share some common features. The suggested models for velocity distribution in the near-bed region are: (1) Constant velocity; (2) exponential velocity distribution; and (3) linear velocity distribution. The measured velocity distributions may be approximated by a single model or by a combination of models depending on roughness geometry and flow conditions. The validity of these models for velocity distribution is supported by laboratory data.     

Dielectrophoresis‐Assisted Integration of 1024 Carbon Nanotube Sensors into a CMOS Microsystem

Carbon‐nanotube (CNT)‐based sensors offer the potential to detect single‐molecule events and picomolar analyte concentrations. An important step toward applications of such nanosensors is their integration in large arrays. The availability of large arrays would enable multiplexed and parallel sensing, and the simultaneously obtained sensor signals would facilitate statistical analysis. A reliable method to fabricate an array of 1024 CNT‐based sensors on a fully processed complementary‐metal‐oxide‐semiconductor microsystem is presented. A high‐yield process for the deposition of CNTs from a suspension by means of liquid‐coupled floating‐electrode dielectrophoresis (DEP), which yielded 80% of the sensor devices featuring between one and five CNTs, is developed. The mechanism of floating‐electrode DEP on full arrays and individual devices to understand its self‐limiting behavior is studied. The resistance distributions across the array of CNT devices with respect to different DEP parameters are characterized. The CNT devices are then operated as liquid‐gated CNT field‐effect‐transistors (LG‐CNTFET) in liquid environment. Current dependency to the gate voltage of up to two orders of magnitude is recorded. Finally, the sensors are validated by studying the pH dependency of the LG‐CNTFET conductance and it is demonstrated that 73% of the CNT sensors of a given microsystem show a resistance decrease upon increasing the pH value.     

Metal‐containing Polymers via Electropolymerization

Electropolymerization represents a suitable and well‐established approach for the assembly of polymer structures, in particular with regard to the formation of thin, insoluble films. Utilization of monomers that are functionalized with metal complex units allows the combination of structural and functional benefits of polymers and metal moieties. Since a broad range of both electropolymerizable monomers and metal complexes are available, various structures and, thus, applications are possible. Recent developments in the field of synthesis and potential applications of metal‐functionalized polymers obtained via electropolymerization are presented, highlighting the significant advances in this field of research.     

Stress intensity factor computation using the method of fundamental solutions: mixed‐mode problems

The method of fundamental solutions is applied to the computation of stress intensity factors in linear elastic fracture mechanics. The displacements are approximated by linear combinations of the fundamental solutions of the Cauchy–Navier equations of elasticity and the leading terms for the displacement near the crack tip. Two algorithms are developed, one using a single domain and one using domain decomposition. Numerical results are given. Copyright © 2006 John Wiley & Sons, Ltd.     

Long COVID: Association of Functional Autoantibodies against G-Protein-Coupled Receptors with an Impaired Retinal Microcirculation

Long COVID (LC) describes the clinical phenotype of symptoms after infection with the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Diagnostic and therapeutic options are limited, as the pathomechanism of LC is elusive. As the number of acute SARS-CoV-2 infections was and is large, LC will be a challenge for the healthcare system. Previous studies revealed an impaired blood flow, the formation of microclots, and autoimmune mechanisms as potential factors in this complex interplay. Since functionally active autoantibodies against G-protein-coupled receptors (GPCR-AAbs) were observed in patients after SARS-CoV-2 infection, this study aimed to correlate the appearance of GPCR-AAbs with capillary microcirculation. The seropositivity of GPCR-AAbs was measured by an established cardiomyocyte bioassay in 42 patients with LC and 6 controls. Retinal microcirculation was measured by OCT–angiography and quantified as macula and peripapillary vessel density (VD) by the Erlangen-Angio Tool. A statistical analysis yielded impaired VD in patients with LC compared to the controls, which was accentuated in female persons. A significant decrease in macula and peripapillary VD for AAbs targeting adrenergic β2-receptor, MAS-receptor angiotensin-II-type-1 receptor, and adrenergic α1-receptor were observed. The present study might suggest that a seropositivity of GPCR-AAbs can be linked to an impaired retinal capillary microcirculation, potentially mirroring the systemic microcirculation with consecutive clinical symptoms.     

Nitric Oxide Signalling in Descending Vasa Recta after Hypoxia/Re-Oxygenation

Reduced renal medullary oxygen supply is a key factor in the pathogenesis of acute kidney injury (AKI). As the medulla exclusively receives blood through descending vasa recta (DVR), dilating these microvessels after AKI may help in renoprotection by restoring renal medullary blood flow. We stimulated the NO-sGC-cGMP signalling pathway in DVR at three different levels before and after hypoxia/re-oxygenation (H/R). Rat DVR were isolated and perfused under isobaric conditions. The phosphodiesterase 5 (PDE5) inhibitor sildenafil (10⁻⁶ mol/L) impaired cGMP degradation and dilated DVR pre-constricted with angiotensin II (Ang II, 10⁻⁶ mol/L). Dilations by the soluble guanylyl cyclase (sGC) activator BAY 60-2770 as well as the nitric oxide donor sodium nitroprusside (SNP, 10⁻³ mol/L) were equally effective. Hypoxia (0.1% O₂) augmented DVR constriction by Ang II, thus potentially aggravating tissue hypoxia. H/R left DVR unresponsive to sildenafil, yet sGC activation by BAY 60-2770 effectively dilated DVR. Dilation to SNP under H/R is delayed. In conclusion, H/R renders PDE5 inhibition ineffective in dilating the crucial vessels supplying the area at risk for hypoxic damage. Stimulating sGC appears to be the most effective in restoring renal medullary blood flow after H/R and may prove to be the best target for maintaining oxygenation to this vulnerable area of the kidney.     

The Role of Heparan Sulfate in CCL26-Induced Eosinophil Chemotaxis

Proinflammatory chemokine ligand 26 (CCL26, eotaxin-3) mediates transendothelial cell migration of eosinophils by binding and activating the G-protein-coupled (GPC) chemokine receptor 3 on the surface of eosinophilic cells. Here we have investigated the role of glycosaminoglycans (GAGs) as potential co-receptors in the process of CCL26-induced eosinophil chemotaxis. For this purpose, we have first identified the GAG-binding site of CCL26 by a site-directed mutagenesis approach in the form of an alanine screening. A panel of GAG-binding-deficient mutants has been designed, generated, and analyzed with respect to their binding affinities to heparan sulphate (HS) by isothermal fluorescence titration studies. This showed that basic amino acids in the α-helical part of CCL26 are strongly involved in GAG-binding. In chemotaxis experiments, we found that decreased GAG-binding affinity correlated with decreased chemotactic activity, which indicates an involvement of GAGs in eosinophil migration. This was further proven by the negative impact of heparinase III treatment and, independently, by the incubation of eosinophils with an anti heparan sulfate antibody. We finally investigated eosinophils’ proteoglycan (PG) expression patterns by real-time PCR, which revealed the highest expression level for serglycin. Including an anti-serglycin antibody in CCL26-induced eosinophil migration experiments reduced the chemotaxis of these immune cells, thereby proving the dependence of eosinophil mobilization on the proteoglycan serglycin.     

Design and Development of a Bimodal Optical Instrument for Simultaneous Vibrational Spectroscopy Measurements

Vibrational spectroscopy techniques are widely used in analytical chemistry, physics and biology. The most prominent techniques are Raman and Fourier-transform infrared spectroscopy (FTIR). Combining both techniques delivers complementary information of the test sample. We present the design, construction, and calibration of a novel bimodal spectroscopy system featuring both Raman and infrared measurements simultaneously on the same sample without mutual interference. The optomechanical design provides a modular flexible system for solid and liquid samples and different configurations for Raman. As a novel feature, the Raman module can be operated off-axis for optical sectioning. The calibrated system demonstrates high sensitivity, precision, and resolution for simultaneous operation of both techniques and shows excellent calibration curves with coefficients of determination greater than 0.96. We demonstrate the ability to simultaneously measure Raman and infrared spectra of complex biological material using bovine serum albumin. The performance competes with commercial systems; moreover, it presents the additional advantage of simultaneously operating Raman and infrared techniques. To the best of our knowledge, it is the first demonstration of a combined Raman-infrared system that can analyze the same sample volume and obtain optically sectioned Raman signals. Additionally, quantitative comparison of confocality of backscattering micro-Raman and off-axis Raman was performed for the first time.