Freestanding Alumina Membrane by Double-Layer Anodization

A novel method has been developed for fabricating full or partial freestanding anodic alumina. In our method a sacrificial metal layer is introduced between an Al film and a Si₃N₄ substrate. A freestanding alumina film at wafer scale is successfully achieved by anodizing the double metal layer, during which the alumina is spontaneously stripped off the Si₃N₄ substrate due to the anodic oxidation of the sacrificial layer. The barrier oxide of the alumina film is effectively removed either by H₃PO₄ dissolution or by CF₄ reactive ion etching. The freestanding alumina film is utilized as a contact mask to transfer its nanoporous pattern to a Si substrate. By patterning the sacrificial metal layer with contact lithography, a partial freestanding alumina film is successfully achieved on the silicon chip, producing a unique micro/nanofluidic channel. Compared with previous techniques, the method reported here is advantageous for its simplicity and flexibility     

A Novel Inverse-Magnetostrictive Force Sensor

The change in magnetic permeability of a material under stress (inverse magnetostriction) offers the potential for a high-performance, low-cost force sensor capable of being used in harsh real-world environments. The existing force sensor technologies are limited in their use in commercial products by either cost issues or susceptibility to electromagnetic noise. Inverse Magnetostriction has been used to measure strain in controlled environments since its discovery by Joule in 1847, but not in practical applications due to a lack of data on how magnetic material properties change with environmental conditions such as temperature. Utilizing an innovative noise-reducing self-inductance design, this paper presents the basis for an inverse-magnetostrictive compressive load sensor. A lumped-parameter model for the change in sensor inductance under load, due to both mechanical and magnetic effects, is derived. The material properties of a magnetostrictive iron alloy are empirically determined over a broad range of loads and temperatures. The model and material properties are confirmed by testing a prototype force sensor. The prototype measures compressive forces from 100 to 25 000 N over a temperature range of 20 degC to 120 deg with a typical error of +/-2% (4% max). The sensor does experience significant thermal hysteresis for which the model does not currently account. This work was motivated by the need for a force sensor in an automobile electric brake system and used a single iron alloy (50% Ni), but the model and testing procedure provide a roadmap for future research to improve the performance and capabilities of such a sensor     

Turning software into a service

The software as a service model composes services dynamically, as needed, by binding several lower-level services-thus overcoming many limitations that constrain traditional software use, deployment, and evolution.     

Individual differences in self-assessed health: An information-processing investigation of health and illness cognition.

In 2 studies, the relation between measures of self-assessed health (SAH) and automatic processing of health-relevant information was investigated. In Study 1, 84 male and 86 female undergraduate students completed a modified Stroop task. Results indicated that participants with poorer SAH showed enhanced interference effects for illness versus non-illness words. In Study 2, 27 male and 30 female undergraduate students completed a self-referent encoding task. Results offered a conceptual replication and extension of Study 1 by confirming the specificity of the relation between SAH measures and automatic processing of health (vs negative or positive general trait) information. These studies provide evidence that individual differences in SAH are reflected in schematic processing of health-relevant information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Creep in polyethylene and hydroxyapatite reinforced polyethylene composites

Isochronous stress-strain relationships and long term creep performance for unfilled and hydroxyapatite filled polyethylene composites have been studied. The tests were carried out in a buffered (pH=7.5) Ringer's solution at 37°C. It was observed that the inclusion of hydroxyapatite does not remove the non-linear viscoelasticity of polyethylene. The creep resistance is found to increase with increase in volume fraction of hydroxyapatite. The creep failure of composites at long times can occur due to debonding of the interface.     

Implementing Information Systems: Some Practical Advice and a Richer Model

Recent research suggests that implementing information systems presents considerable difficulties and that many implementations are total or partial failures. This paper argues that what both practitioners and students require are richer and more acceptable models of information systems implementation. Accordingly, case study data concerning the introduction of manufacturing resource planning (MRP II) are used to illustrate five patterns of behaviour (rites) which capture important social actions; and four components of changing psychological orientation. It is argued that appreciation of the rites and psychological developments identified here will support effective change programmes. Guidelines based on our model are provided for practitioners.     

The effects of chronic high dose androgen or estrogen treatment on the human prostate [corrected

Prostate development and disease are androgen dependent. However, the nature of hormonal effects on the prostate of healthy young men is not clear. We, therefore, measured prostate size in males chronically exposed to high doses of androgens (AS; habitual anabolic steroid abusers; n = 15) or estrogens (E; male to female transsexuals; n = 11) and compared the results with those in age-matched healthy eugonadal men without known prostate disorders. Prostate size was measured by planimetric ultrasound as cross-sectional areas and maximal dimensions in three orthogonal dimensions with a 7.5-megahertz B-mode sector scanner biplane in a transrectal transducer at 2.5 mm steps from the base to the apex of prostate. Total prostate volume (TPV) was reconstructed from planimetric sections, central prostate volume (CPV) was calculated by the ellipsoidal formula from the appropriate three maximum dimensions, and peripheral prostate volume was determined by the difference between TPV and CPV. Compared with age-matched controls, TPV was normal (-2%) in AS (P = 0.752) and reduced by 31% in E (P = 0.002), whereas CPV was increased by 20% in AS (P = 0.002) and reduced by 46% in E (P = 0.002), and the ratio of CPV/peripheral prostate volume was increased by 77% in AS (P < 0.001) and decreased by 33% in E (P = 0.047). Blood sex hormone-binding globulin was elevated by nearly 500% in E (P < 0.001), but was reduced by 47% in AS (P = 0.003). Prostate-specific antigen was normal (-6%) in AS (P = 0.799) and decreased by 86% in E (P = 0.002). Prostatic acid phosphatase was increased by 26% in AS (P = 0.007), but was unchanged (-28%) in E (P = 0.106). Total and free testosterone levels were reduced to castrate levels in E, whereas LH, FSH, and total testosterone levels were significantly reduced in AS. We conclude that in the human prostate of young men, CPV is more hormonally sensitive than TPV, and during high dose treatment, CPV is preferentially increased by chronic androgen treatment and decreased by chronic estrogen treatment. The reduction of TPV by estrogens was less than expected if solely attributable to inhibition of endogenous gonadotropin and testosterone secretion, suggesting that estrogens also have a positive effect on the normal human prostate. The reversibility and long term significance of androgen-induced stimulation of CPV and, in particular, its relationship to the onset and severity of benign prostatic hyperplasia remain to be clarified.     

Effects of viscosity on the bitterness and astringency of grape seed tannin

To examine the separate effects of viscosity and sweetness on astringency, aqueous solutions of grape seed tannin (GST) were thickened with carboxymethyl cellulose (CMC) from 2 to 45 cP (experiment 1) or sweetened with 0 to 1.8 g/L aspartame (experiment 2). Trained subjects continuously rated astringency and bitterness in duplicate. Subjects were categorized by the salivary flow induced by citric acid and ability to taste n-propyl thiouracil (PROP). In experiment 1, maximum intensity and total duration of astringency were significantly decreased as viscosity rose, although time to maximum intensity of astringency was not affected. Maximum intensity and total duration of bitterness were not significantly affected by increasing viscosity; however, the onset of bitterness was significantly delayed. In experiment 2, increasing sweetness had no affect on any astringency parameter, although maximum intensity of bitterness was significantly decreased. Neither PROP nor salivary flow-status had any effect on perception of bitterness or astringency in either experiment.     

Relative Contributions of the Male and the Female to Sexual Behavior and Reproductive Success in the Japanese Quail (Coturnix japonica).

Two contrasting investigative techniques provided evidence consistent with the interpretation that female quail (Coturnix japonica) regulate male copulatory behavior by the duration of their immobility and through this behavioral mechanism they also control the rate of fertilization of their eggs. In Experiment 1, copulation tests with males and females from different genetic lines showed that the type of female that participated in a copulatory test significantly influenced the latency of the male's grab, mount, and cloacal contact responses and also determined the efficiency of the male's copulatory behavior. These measures of male performance were correlated with female immobility in Experiment 2, which used a more homogeneous population of quail. Furthermore, 2 of these measures (copulatory efficiency and the latency to make cloacal contact) were correlated with fertilization rate. (PsycINFO Database Record (c) 2010 APA, all rights reserved)