Effects of ethanol,formaldehyde, and gentle heat fixation in confocal resonance Raman microscopy of purple nonsulfur bacteria

Resonance Raman microscopy is well suited to examine living bacterial samples without further preparation. Therefore, comparatively little thought has been given to its compatibility with common fixation methods. However, fixation of cell samples is a very important tool in the microbiological sciences, allowing the preservation of samples in a specific condition for further examination, future measurements, transport, or later reference. We examined the effects of three common fixatives—ethanol, formaldehyde solution, and gentle heat—on the resonant Raman spectrum of three generic bacteria species, Rhodobacter sphaeroides DSM 158^T, Rhodopseudomonas palustris DSM 123^T, and Rhodospirillum rubrum DSM 467^T, holding carotenoid‐ and heme‐chromophores in confocal Raman microscopy. In addition, we analyzed the effect of poly‐L ‐lysine coating of microscope slides, widely used for mounting biological and medical samples, on subsequent confocal Raman measurements of native and fixed samples. The results indicate that ethanol is preferable to formaldehyde as fixative if applied for less than 24 h, whereas heat fixation has a strong, detrimental effect on the resonant Raman spectrum of bacteria. Formaldehyde fixation excels at fixation times above 24 h, but causes an overall reduction in signal intensity. Poly‐L ‐lysine coating has no discernable effect on the Raman spectra of samples fixed with ethanol or heat, but it further decreases the signal intensity, especially at higher wavenumbers, in the spectra of samples fixed with formaldehyde. Microsc. Res. Tech. 74:177–183, 2011. © 2010 Wiley‐Liss, Inc.     

The nature of polymer grafts and substrate shape on the surface degradation of poly(l‐lactide)

Surface grafting of functional polymers is an effective method to alter material properties and degradation behavior. Two different substrate shapes of poly(l ‐lactide) (PLLA), i.e., films and microparticles, were surface‐grafted with hydrophilic monomers, and their surface degradation was monitored. Surface grafting with a hydrophilic and acidic polymer graft [acrylic acid (AA)] induced large alterations in the surface morphology and topography of the films. In contrast, hydrophilic and neutral polymer grafts [acrylamide (AAm)] had no significant effect on the surface degradation behavior, while the PLLA reference and co‐monomeric (AA/AAm) polymer‐grafted samples exhibited intermediate surface degradation rates. The grafted PAA chains induced a local acidic environment on the surface of the substrates, which in turn catalyzed the surface degradation process. This effect was more pronounced in the films than in the microparticles. Thus, the nature of the grafted chains and substrate geometry were shown to affect the surface degradation behavior of PLLA substrates. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42736.     

Land use mapping by local authorities in Britain

This paper reports on a study of great historic and contemporary gardens as perceived by teachers and scholars of landscape architecture and garden history and as portrayed in garden history books. Lists of most frequently cited historic and contemporary gardens are provided and their representation in selected garden history books is discussed.     

Solvent and Extraction Conditions Control the Assayable Phenolic Content and Antioxidant Activities of Seeds of Black Beans,Canola and Millet

The effects of extraction solvent and conditions on the total phenolic content (TPC) and antioxidant activity of black beans, canola and foxtail millet were investigated. The antioxidant activity was assayed using 2,2‐diphenyl‐1‐picrylhydrazyl radical scavenging activity (DRSA) and oxygen radical absorbance capacity (ORAC). Four solvent systems, namely 70 % acetone, 80 % ethanol, 80 % methanol and a mixture of acetone/methanol/water (7:7:6, v/v/v) were used. The extraction methods adopted in this study included refluxing, homogenization, cold extraction and sonication. The TPC as measured using the Folin Ciocalteu's method were 12.35–28.39, 2.43–16.73, and 1.78–5.06 µmol catechin equivalents/g dry matter (dm) for canola, black beans and foxtail millet, respectively. Aqueous acetone afforded the highest TPC for black beans and canola. Within the same solvent system used, the TPC, DRSA and ORAC obtained from different extraction techniques differed for black beans, canola and foxtail millet. The results demonstrated that the solvent system as well as method influenced the extraction of phenolic compounds and their antioxidant activities, depending on the type of matrix in which phenolics were embedded.     

Effect of CO2 Exposure on the Chemical Stability and Mechanical Properties of BaZrO3‐Ceramics

The reactivity of BaZrO₃ with CO₂ has been addressed as one of the major challenges with BaZrO₃‐based electrolytes in protonic ceramic fuel cells. Here, we present a study of the effect of CO₂ exposure on BaZrO₃‐materials at elevated temperatures. Dense BaZr_1?xY_xO_3?x/2 (x = 0, 0.05, 0.1, 0.2) and BaCe_0.2Zr_0.7Y_0.1O_2.95 ceramics were prepared by sintering of powder prepared by spray pyrolysis. The Vickers indentation method was used to determine the hardness and estimate the fracture toughness of pristine materials as well as the corresponding materials exposed to CO₂. Formation of BaCO₃ on the surface of exposed ceramics was confirmed by X‐ray diffraction and electron microcopy. The reaction resulted in formation of Ba‐deficient perovskite at the exposed surface. The reaction with CO₂ was most pronounced at 650°C compared to the other temperatures applied in the study. The reactivity was also shown to depend on the Y‐content and the grain size and was most pronounced for BaZr_0.9Y_0.1O_2.95. The reaction with CO₂ was observed to have a profound effect on the fracture toughness of the ceramics, demonstrating a depression of the mechanical stability of the materials. The results are discussed with respect to the chemical and mechanical stability of BaZrO₃ materials, with particular emphasis on the composition and grain size.     

Relationships Between Structure and Activity in the α-Amylase Family of Starch-metabolising Enzymes

α-Amylases are known to be multidomain proteins, i.e., the molecules consist of several folding units. Each α-amylase is believed, however, to have a catalytic domain consisting, of a barrel of eight parallel α-strands surrounded by eight α-strands. with an extra helix inserted after the sixth γ-strands. The α-strands and helices alternate along the polypeptide chain and are linked together by irregular loops. Amino acid residues situated on the loops joining the C-terminal end of each α-strand to the N-terminal end of the following helix make up the active site of the enzymes. A similar structure has been found in cyclodextrin glucanotransfcrases and it is now believed that such a (α/α)8-barrel also constitutes the catalytic domain of enzymes active on α-1.6-glucosidic bonds, and of enzymes with dual specificity for both α-1.4- and α-1.6- bonds. Knowledge of the three-dimensional structure of α-amylases and cyclodextrin glucanotransferase has made possible identification of structural features important for enzymic activity and specificity. By analogy, some general conclusions are reached concerning pullulanase, isoamylase. oligo-1,6-glucosidase, neopullulanase and branching enzymes.     

Influence of medium-chain triglycerides on lipid metabolism in the rat

Lipid metabolism was studied in rats fed diets containing corn oil, coconut oil, or medium-chain triglyceride (MCT), a glyceride mixture containing fatty acids of 8 and 10 carbons in length. The ingestion of MCT-supplemented, cholesterolfree diets depressed plasma and liver total lipids and cholesterol as compared with corn oil-supplemented diets. In rats fed cholesterol-containing diets, plasma cholesterol levels were not influenced by dietary MCT, but liver cholesterol levels were significantly lower than in animals fed corn oil. In vitro cholesterol synthesis from acetate-1-¹⁴C was lower in liver slices of rats that consumed MCT than in similar preparations from corn oil-fed rats. Studies of fatty acid carboxyl labeling from acetate-1-¹⁴C and the conversion of palmitate-1-¹⁴C to C₁₈ acids by liver slices showed that chain-lengthening activity is greater in the liver tissue of rats fed MCT than in the liver of animals fed corn oil. The hepatic fatty acid desaturation mechanisms, evaluated by measuring the conversion of stearate-2-¹⁴C to oleate, was also enhanced by feeding MCT. Adipose tissue of rats fed MCT converts acetate-1-¹⁴C to fatty acids at a much faster rate than does tissue from animals fed corn oil. Evidence is presented to show that the enhanced incorporation of acetate into fatty acids by the adipose tissue of rats fed MCT represents de novo synthesis of fatty acids and not chain-lengthening activity. Data are also presented on the fatty acid composition of plasma, liver, and adipose tissue lipids of rats fed the different fats under study.     

Melt processing and characterization of polyvinyl alcohol and polyhydroxyalkanoate multilayer films

Multilayer films for food packaging applications composed of polyvinyl alcohol (PVOH) as the core layer and polyhydroxyalkanoate (PHA) as the outer skin layers were produced by the co‐extrusion process. Rheological properties of PVOH and PHA were performed and analyzed before co‐extruding into a cast film. Analysis of the rheological data indicated the processing temperatures and grades of the PVOH and PHA polymers that would produce similar viscosity and melt flow properties. To improve adhesion of the layers, PHA was grafted with maleic anhydride using a dicumyl peroxide initiator to provide a tie layer material, which improved the peel strength of the PHA and PVOH layers by over 2×. Oxygen transmission rate (OTR) testing showed that the multilayer sample provided an OTR of 27 cc/m²‐day at 0% relative humidity (RH) and rates of 41 and 52 cc/m²‐day at relative humidity values of 60% and 90% RH, respectively. This indicates significant barrier performance enhancement over monolayer PVOH that provided an OTR of 60 cc/m²‐day at 0% RH and 999 cc/m²‐day at 60% RH. Biodegradation testing of the films in the marine environment showed that both the unmodified and maleated PHA polymers displayed high levels of mineralization, whereas the PVOH material did not. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013