Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Neuropsychological and psychosocial effects of the FMR-1 full mutation: Case report of monozygotic twins discordant for the fragile X syndrome.

An extensive evaluation was conducted with 16-yr-old monozygotic twins concordant for the fragile X full mutation but discordant for mental retardation. The clearly affected twin had an IQ score of 47; 77% of her neuropsychological z scores were at least 2 SDs below average. Her sister had an IQ score of 105 and average neuropsychological performance. However, each girl demonstrated relative verbal strengths and visual-spatial weaknesses. Their parents rated each girl as having significant problems with attention, conduct, anxiety-withdrawal, and hyperactivity. The girls did not rate themselves as having significant anxiety. These findings are consistent with group data on females with fragile X and demonstrate the wide range of effects associated with the fragile X full mutation. This case report implicates the importance of a psychosocial phenotype of fragile X independent of cognitive ability level. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

How infants perceive a simple causal event.

Four experiments examined 10-mo-old infants' causal event perception. Exp 1 replicated previous studies except that the specific objects used as agent and recipient varied from trial to trial. Under these conditions infants did not process the causality. Instead they keyed on specific temporal and spatial differences among the events. Exp 2 showed that infants notice a change in the particular agent performing either a causal or noncausal action. Exp 3 showed that infants do not notice a change in the type of action done to a particular recipient. Exp 4 demonstrated that infants do not pay attention to the object used as a recipient. As a whole, the results indicate that 10-mo-old infants perceive the causality of simple events by associating a specific agent with the causal action. These results provide more support for an information-processing view than for the view that infants have a causal module. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Contribution of listeners' approaching motion to auditory distance perception.

Of the several sources of acoustic information for distance perception, those arising from motion of the listener or sound source have received little attention. This motion-related information (recently called acoustic tau) is described, and experiments evaluating its utilization are presented. Accuracy and consistency at walking to the locations of briefly presented sounds were better when people listened while walking than while standing still. Manipulations of the sound to simulate shorter or longer target distances produced appropriate undershooting but not overshooting. The results indicate that people use motion-related acoustic information about distance to guide their locomotor actions, although they do not take full advantage of this information. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Use of Explosives on The Moon

The utilization of explosives for excavation on the lunar surface is under serious consideration as a part of the design for construction of temporary and permanent bases. An excavation research program has shown that small‐scale explosives blasting in a lunar‐soil simulant will greatly reduce the digging forces required for scoop and dragline excavators. Some crater‐blasting parameters were determined for the lunar soil simulant at one Earth gravity and at 10 Earth gravities using a centrifuge. The size of the craters produced at 10 Earth gs matched those formed at one earth g by scaling according to the weight of the explosive. These data can be applied to explosive‐excavation problems such as habitat construction, burial of nuclear power sources, and the rapid construction of shelters remote from the main base to shield against solar‐flare activity.     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

From information to probability: An axiomatic approach—Inference is information processing

We define the very rich language of composed conditionals on a three‐valued logic and use this language as the communication tool between man and machine. Communication takes place for three reasons: knowledge acquisition, query, and response. Learning, thinking, and answering questions are of a pure information theoretical nature. The pivot of this knowledge processing concept is the amount of information (bit) we receive if a conditional becomes true. We follow an axiomatic approach to information theory rather than the classical probabilistic approach of Shannon; information comes first, and then comes probability. In the light of this philosophy, query and response experience new interpretations. Both, acquisition and response are realized by maximizing entropy and minimizing relative entropy, respectively. The iterative solution of these mathematical optimization problems gives new insights into the adaptation of prior knowledge to new information. Our expert system shell SPIRIT supports this kind of knowledge processing, which will be established by suitable examples. © 2003 Wiley Periodicals, Inc.     

The influence of preparation conditions on the electrochemical behaviour of CuO in a Li/CuO cell

A dozen CuO samples prepared under various conditions and from different starting materials were evaluated as cathode materials for a primary Li/CuO cell. The “thin electrode” method was used for rapid evaluation of the samples. Both coulombic efficiency and discharge voltage depend considerably on the method of synthesis. No correlation was found between the specific surface area and the resistivity of the samples on the one hand and the cathode performance on the other. Best results were obtained from CuO prepared by the oxidation of Cu₂O under controlled temperature and time of oxidation.