High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

38. Generalversammlung von CENELEC

Ohne Zusammenfassung     

Ewald Hering und die Gegenfarbtheorie

Ewald Hering's color-opponent-theory is still considered one of the foundations of the visual sciences. Prior to Hering, Hermann v. Helmholtz introduced a theory of color appearance, which was based primarily on the physical aspects of the stimulus. In contrast to Helmholtz, Hering's theory strongly emphasized the subject's perception of color. As a consequence, Hering considered Helmholtz' theory inadequate. Contrary to some historical accounts, he did not object to Helmholtz's three-receptor explanation for color-mixture. Instead of Helmholtz' fundamental colors red, green, and blue, Hering suggested that the colors possess opponent character: blue-yellow; red-green; and, black-white. Helmholtz, on the other hand, refused to accept Hering's theory. Finally, a student with Helmholtz, Johannes v. Kries, developed the so-called “zone-theory”, which combines both, Young-Helmholtz's and Hering's theory at different stages of the visual information processing system.     

International collaboration: Will it be keeping alive East European research?

International scientific collaboration is very sensitive to political and economic changes in a country or a geopolitical region. Collaboration in research is reflected by the corresponding coauthorship of the published results which can be analysed with the help of bibliometric methods. Based on data from theScience Citation Index (SCI), the change of annual international coauthorship patterns ofBulgaria, Czechoslovakia, Hungary, Poland andRomania have been analysed for the periods 1981–1985 and 1984–1993, respectively. It is shown that international collaboration was not developing similarly in the countries under study. Whilst scientific communities of Hungary and Poland have already been opening in the early 80s, the international collaboration of the other East-European countries was still dominated by COMECON relations till 1989. As expected, since 1990 an increasing scientific collaboration with highly developed countries can be observed in all five countries. At the same time, scientific collaboration with the former communist countries shows a clear decline. The great share of international co-authorship links is some countries reflect various tendencies part of which are interpreted with the help of a cardiologic model.     

Rank order filters and priority queues

Summary A derivation of a parallel algorithm for rank order filtering is presented. Both derivation and result differ from earlier designs: the derivations are less complicated and the result allows a number of different implementations. The same derivation is used to design a collection of priority queues. Both filters and priority queues are highly efficient: they have constant response time and small latency. Anne Kaldewaij received an M.Sc. degree in Mathematics from the University of Utrecht (The Netherlands) and a Ph.D. degree in Computing Science from the Eindhoven University of Technology. Currently, he is associate professor in Computing Science at Eindhoven University. His research includes parallel programming and the design of algorithms and data structures. He enjoys teaching and he has written a number of textbooks on mathematics and programming. Jan Tijmen Udding received an M.Sc. degree in Mathematics in 1980 and a Ph.D. degree in Computing Science in 1984 from Eindhoven University of Technology. Currently, he is associate professor at Groningen University. His main research interests are mathematical aspects of VLSI, program derivation and correctness, and functional programming.     

Analysis of lipid classes by solid-phase extraction and high-performance size-exclusion chromatography

An improved method to analyze lipid classes of edible oils and fats by solid-phase extraction (SPE) and high-performance size-exclusion chromatography (HPSEC) is presented. A mixture of lipid standards was fractionated by the solid-phase extraction procedure (NH₂ phase) into polar and nonpolar fractions; these were then submitted to analysis by HPSEC. The size-exclusion chromatographic columns were three styrene/divinylbenzene columns with pore sizes of 100 Å and 50 Å. Light-scattering was used for the detection system, and the parameters of the detector were optimized to minimize the difference between the responses of the compounds studied. With this procedure it was possible to separate the following lipid classes: triacylglycerols, diacylglycerols, monoacylglycerols and free fatty acids, sterols, sterol esters, tocopherols and carotenoids. Quantitative analysis was studied for a light-scattering detector with several lipid standards of different molecular weights and unsaturation levels.     

“Technically Unavoidable” in Terms of Genetically Modified Organisms – an Approach for Food Control

In case of findings of authorized genetically modified (gm) plant ingredients below the 0.9 per cent threshold, exceptions from labelling requirements according to regulation (EC) No. 1829/2003 can only be made, “provided that this presence is adventitious or technically unavoidable”. The authors describe factors that should be considered regarding contaminations by gm plant ingredients as technically unavoidable or not. A practical approach for interpretation, taking into account quality control measures and documentation as well as present findings in comparable products is proposed. Received: February 23, 2007     

Assessment of Capillary Rise from Shallow Groundwater by the Simulation Model SIMWASER Using Either Estimated Pedotransfer Functions or Measured Hydraulic Parameters

The performance of the water balance and crop growth model SIMWASER to estimate the water supply of a lawn by capillary rise from shallow ground water was investigated by using lysimeter measurements with a sandy and a clayey soil. Moreover the robustness of the model was evaluated by running it either with measured hydraulic soil parameters or with estimated pedotransfer functions (PTFs) derived from texture and bulk density. Simulations were performed for the years 1996–1998 with input data from the lysimeter station Berlin-Dahlem (Germany) for lysimeters containing undisturbed sandy or clayey soil monoliths, with groundwater at 135 cm depth. Simulated evapotranspiration and percolation/capillary rise were in good agreement with the measured data for all variants, while simulated soil water storage was acceptable only for the variants using hydraulic soil data based on laboratory measurements or using PTFs derived from known soil class and bulk density. PTFs based on mean total pore volume of the respective soil classes yielded soil water storages which were evidently too high; therefore they should be used with care and must be avoided at all in simulating the soil water balance of arid sites with shallow groundwater.     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

Scaled model measurements of embedding impedances for SIS waveguide mixers

Several scaled models have been used to determine the contributions of various waveguide mount parameters to the embedding impedance of a mm-wave SIS mixer. Measured effects of waveguide height, substrate orientation and width, junction location, lead inductance and RF-filter impedance are presented and discussed.