On the dynamics of the electric field induced breakdown in lipidmembranes

Electric field methods are powerful tools for cell characterization and manipulation. Important biotechnological applications, e.g., electrofusion of cells or electroinjection of macromolecules into living cells, rely on membrane breakdown. Despite the widespread use of these techniques, the process of membrane breakdown is poorly understood: a better understanding can be expected to lead to higher efficiencies. The present study used planar lipid bilayers in order to limit the number of experimental parameters. Membrane rupture was induced by careful application of short electric field pulses: measurement of the subsequent increase in membrane conductivity with time permitted the underlying mechanism to be characterized. The initial process of pore formation starts a few μs after the onset of the pulse, and the ensuing breakdown of the entire lipid membrane occurs within about a millisecond (pore widening velocity of a few cm/s). The kinetics of the pore-opening process could be influenced qualitatively by adding surfactants and lipid-attached macromolecules, respectively. Changing the effective mass per unit area of membrane, which could be brought about by using known percentages of lipids with covalently bound, hydrophilic polymers, allowed a model for the pore widening process to be quantitatively tested     

Eradication of Barrett''s mucosa with argon plasma coagulation and acid suppression: immediate and mid term results

Microcapsules are used for the formulation of drug controlled release and drug targeting dosage forms. Encapsulated hydrophobic drugs are often applied as their solutions in plant oils. The uptake of the oils in the complex coacervate microcapsules can be improved by the addition of surfactants. In this study, soybean, olive and peanut oils were chosen as the representatives of plant oils. The well characterized complex coacervation of gelatin and acacia has been used to produce the microcapsules. The amount of encapsulated oil has been determined gravimetrically. The encapsulation of the oils was high (75-80%). When the surfactants with HLB values from 1.8 to 6.7 were used, the amount of encapsulated oil was high (65-85%). A significant decrease of the oil content in the microcapsules was found when Tween 61 with HLB = 9.6 had been added into the mixture. No oil was found inside the microcapsules from the coacervate emulsion mixture containing Tween 81 (HLB = 10) and Tween 80 (HLB = 15), respectively. The results of the experiment confirm the dependence of hydrophobic substance encapsulation on the HLB published recently for Squalan.     

SH3 binding domains in the dopamine D4 receptor

The dopamine D4 receptor is a G protein-coupled receptor (GPCR) that belongs to the dopamine D2-like receptor family. Functionally, the D2-like receptors are characterized by their ability to inhibit adenylyl cyclase. The dopamine D4 receptor as well as many other catecholaminergic receptors contain several putative SH3 binding domains. Most of these sites in the D4 receptor are located in a polymorphic repeat sequence and flanking sequences in the third intracellular loop. Here we demonstrate that this region of the D4 receptor can interact with a large variety of SH3 domains of different origin. The strongest interactions were seen with the SH2-SH3 adapter proteins Grb2 and Nck. The repeat sequence itself is not essential in this interaction. The data presented indicate that the different SH3 domains in the adapter proteins interact in a cooperative fashion with two distinct sites immediately upstream and downstream from the repeat sequence. Removal of all the putative SH3 binding domains in the third intracellular loop of the dopamine D4 receptor resulted in a receptor that could still bind spiperone and dopamine. Dopamine could not modulate the coupling of these mutant receptors to adenylyl cyclase and MAPK, although dopamine modulated receptor-G protein interaction appeared normal. The receptor deletion mutants show strong constitutive internalization that may account for the deficiency in functional activation of second messengers. The data indicates that the D4 receptor contains SH3 binding sites and that these sites fall within a region involved in the control of receptor internalization.     

p-aminohippurate uptake by syncytial microvillous membrane vesicles of human term placenta

The mechanism of uptake of p-aminohippurate (PAH) by syncytial microvillous membrane vesicles of human term placenta was investigated. Initial PAH uptake and efflux were increased in the presence of a pH-gradient and a Cl(-)-gradient, respectively. Forced negative and positive membrane potentials did not influence the uptake, which indicated that the transport is not electrogenic. The pH-dependent increase is probably the result of a higher rate of diffusion due to a lower degree of dissociation of PAH. Because several organic anions failed to transstimulate PAH uptake and FCCP did not decrease the uptake in the presence of an inwardly directed H(+)-gradient, ruling out a PAH/OH- antiport, an anion exchange system does not appear to be present in these membranes. Since electrogenicity and anion exchange seem not to be involved in the Cl(-)-dependent increase, an allosteric effect of Cl- on the transporter might be possible. Various organic anions were able to inhibit pH-stimulated PAH uptake significantly. Kinetic analysis of the probenecid sensitive part of uptake provided further evidence for mediated transport of PAH (Km = 7.4 +/- 2.6 mM and Vmax = 2.0 +/- 0.4 nmol/mg/15 s). Non-inhibitable diffusion accounted for the main part of total transport. Concentration dependent inhibition of PAH transport by probenecid showed a Ki of 2.5 +/- 0.9 mM. It is concluded that human placental syncytial microvillous membrane vesicles possess a low affinity transport mechanism for PAH with low specificity. The importance of this system, for placental excretion of anionic drugs, will depend on the intrasyncytial concentration of these drugs, caused by the transport across the basal membrane.     

Finances and Well-Being: A Dynamic Equilibrium Model of Resources.

This study of 513 Dutch farmers tested a dynamic equilibrium model of resources (an extension of the conservation of resources theory; S. E. Hobfoll, 1989, 1998, 2001). With structural equation modeling, the advantages of a 3-wave longitudinal design were comprehensively used, such as addressing bidirectional causal effects and within-individual vs. between-individual change. This allowed for a careful analysis of the management function of resources in the stress process. Results showed that well-being had stronger within-person stability than finances. Increased levels of financial problems temporarily increased psychological distress but not self-reported illness. Conversely, farmers with higher stable baselines of psychological distress also had higher baselines of self-reported illness and experienced more negative changes in their financial situation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Editorial: Special Issue on “Texture Analysis and Synthesi”

International Journal of Computer Vision -     

An overview of ultra-wideband microwave imaging via space-time beamforming for early-stage breast-cancer detection

Ultra-wideband (UWB) microwave imaging has recently been proposed for detecting small malignant breast tumors. In this article, we review the current research status of this approach. First, we introduce the concept of microwave imaging via space-time (MIST) beamforming and related signal-processing algorithms. The objective of these signal-processing techniques is to form a spatial image of scattered microwave energy, and to identify the presence and location of malignant lesions from their scattering signatures. Next, we present numerical studies based on finite-difference time-domain simulations to demonstrate the efficacy of MIST beamforming for detecting small malignant breast lesions in both prone and supine configurations. Finally, the experimental feasibility of UWB microwave imaging is demonstrated using an initial imaging prototype and multilayered breast phantoms.     

Passive-Based Walking Robot

In this article, we presented our passive-based biped Denise. Using only two foot contact switches as sensors and simple on/off pneumatic muscle action, it walks at 0.4 m/s and can handle floor disturbances up to 6 mm (leg length is 0.7 m). Its simplicity, efficiency, and die natural look of its motions make it a promising lead for the development of commercially viable humanoid robots. The aim of this article is to provide other researchers enough details so that they can reproduce the work or use it as a basis for future research.     

Axisymmetric extrusion through adaptable dies—Part 1: Flexible velocity fields and power terms

An adaptable die is one that not only produces the correct geometrical shape, but also is designed through an adaptable method to impart other desirable properties to the product or process. In this first part of a series of papers, six kinematically admissible velocity fields are developed for use in upper bound models for axisymmetric extrusion through various dies, including extrusion through adaptable dies. Three base velocity fields are presented:

(1) assuming proportional angles in the deformation zone,

(2) assuming proportional areas in the deformation zone, or

(3) assuming proportional distances from the centerline in the deformation zone.

The base velocity is modified by an additional term comprised of two functions. One function allows extra flexibility in the radial direction, and the second function allows extra flexibility in the angular direction. There are two forms of the second function, which meet the required boundary conditions. The flexibility function in the radial direction is represented by a series of Legendre polynomials, which are orthogonal over the deformation region. The power terms derived for these velocity fields for use in upper bound models are also presented.Part 2 of this series compares the results obtained in upper bound models for the six velocity fields for a spherical extrusion die. In Part 3, the use of the best velocity field for extrusion through streamlined dies is developed to determine the adaptable die shape, which minimizes the required extrusion pressure. Additionally, the adaptable die shape is compared with results from Yang and Han for arbitrarily curved and streamlined dies.