Impact of open dumping of municipal solid waste on soil properties in mountainous region

This paper presents the effect of open dumping of municipal solid waste (MSW) on soil characteristics in the mountainous region of Himachal Pradesh, India. The solid waste of dumpsite contains various complex characteristics with organic fractions of the highest proportions. As leachate percolates into the soil, it migrates contaminants into the soil and affects soil stability and strength. The study includes the geotechnical investigation of dump soil characteristics and its comparison with the natural soil samples taken from outside the proximity of dumpsites. The geochemical analysis of dumpsite soil samples was also carried out by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Visual inspection revealed that the MSW consists of high fraction of organics, followed by paper. The soil samples were collected from five trial pits in the dumpsites at depths of 0.5 m, 1 m and 1.5 m. Then the collected soil samples were subjected to specific gravity test, grain size analysis, Atterberg's limit test, compaction test, direct shear test, California bearing ratio (CBR) test and permeability analysis. The study indicated that the dumpsite soils from four study regions show decreasing trends in the values of maximum dry density (MDD), specific gravity, cohesion and CBR, and increasing permeability as compared to the natural soil. The results show that the geotechnical properties of the soils at all four study locations have been severely hampered due to contamination induced by open dumping of waste.     

Ceria (La3+, Sr2+)/Carbonates Nanocomposite Electrolytes with High Electrical Conductivity for Low‐Temperature SOFCs

A series of ceria‐based nanocomposites consisting of lanthanum and strontium codoped ceria with composition Ce_0.89La_0.07Sr_0.04O_1.925 (CL7S4) and eutectic mixture of carbonates Li₂CO₃‐Na₂CO₃ (LNCO) have been prepared by mixing nanosize powders of CL7S4 and LNCO. Samples have been characterized using differential thermal analysis, X‐ray diffraction, scanning electron microscopy combined with energy‐dispersive spectroscopy, thermal expansion, and impedance spectroscopy. A sharp increase in ionic conductivity is observed in all the composite specimens corresponding to superionic transition. Sample containing 35 wt% of carbonate shows the maximum conductivity (2.56 × 10^?1 S/cm at 500°C) with activation energy of conduction, E_a 0.23 eV.     

Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures

International Journal of Coal Science & Technology - Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the...     

Investigation of CL‐20 and RDX Nanocomposites

Nanocrystalline explosives offer a number of advantages in comparison to conventional energetics including reduced sensitivity and improved mechanical properties. In this study, formulations consisting of 90 % hexanitro‐hexaazaisowurtzitane (CL‐20) or cyclotrimethylene trinitramine (RDX) and 10 % polyvinyl alcohol (PVOH) were prepared with mean crystal sizes ranging from 200 nm to 2 μm. The process to create these materials used a combination of aqueous mechanical crystal size reduction and spray drying. The basic physical characteristics of these formulations were determined using a variety of techniques, including scanning electron microscopy, X‐ray diffraction, and Raman spectroscopy. Compressive stress‐strain tests on pressed pellets revealed that the mechanical properties of the compositions improved with decreasing crystal size, consistent with Hall‐Petch mechanics. In the most extreme case (involving CL‐20/PVOH formulations), crystal size reduction from 2 μm to 300 nm improved compressive strength and Young’s modulus by 126 % and 61 %, respectively. These results serve to highlight the relevance of structure‐property relationships in explosive compositions, and particularly elucidate the substantial benefits of reducing the high explosive crystal size to nanoscale dimensions.     

Modeling gas absorption accompanied by chemical reaction in bubble column and foam-bed slurry reactors

The published data in the literature and the reported models on foam-bed reactors have been reanalyzed. It is observed that the models have been developed assuming negligible conversion in the storage section although the storage constitutes 65–85% of the total volume of liquid/slurry charged into the reactor. For confirmation of the reported information, in the present work, experiments have been performed in foam-bed and bubble column slurry reactors for carbonation of hydrated lime slurry using carbon-dioxide gas under identical conditions. A comparison of the relative performances of the two reactors has been made. Storage section is found to be the main section governing the performance of the foam-bed slurry reactor. New mathematical models have been developed for both the reactors. The model predictions agree well with the experimental data.     

Modeling Oxidation of Soot Particles Within a Laminar Aerosol Flow Reactor Using Computational Fluid Dynamics

This work examines the measurement of surface specific soot oxidation rates with the High Temperature Oxidation-Tandem Differential Mobility Analyzer (HTO-TDMA) method. The Computational Fluid Dynamics package CFD-ACE⁺ is used to understand particle flow, oxidation and size dependent particle losses in the laminar aerosol flow reactor using an Eulerian-Lagrangian framework. Decrease of DMA selected mono-disperse particle size distribution due to oxidation within the aerosol tube is modeled using fitted kinetic soot oxidation parameters. The effects of Brownian diffusion and thermophoresis on particle flow and loss to the reactor walls are evaluated. The position of peak particle diameter, which is used as an indicator to determine oxidation rate, is found to be independent of diffusion, thermophoresis and secondary flow effects, thus validating its use in deriving kinetic soot oxidation parameters. Diffusion does not affect the evolution of particle size distribution within the reactor. However, thermophoresis is found to be the dominant mechanism influencing both shape of particle size distribution and particle loss to the walls of the aerosol reactor. Simulations show reduced effects of secondary recirculating flows on the particle flow trajectories in a vertical furnace as compared to horizontal furnace orientation. This work highlights the importance of making accurate measurements of temperature within the modeling domain. Since gas temperature within the flow tube could not be measured with high radial resolution using radiation shielded thermocouple, the derived soot oxidation rate may be uncertain by a factor of 2. Importantly, CFD simulations suggest that a distribution of temperature and size-dependent particle reactivities may be present in the reactor, requiring further theoretical and experimental investigation.     

Gamma Irradiation Insensitivity of GaAs Schottky Diodes

Guarded Al-and Au-nGaAs Schottky barrier diodes were subjected to Co60 ?-ray irradiation and their electrical characteristics evaluated. These GaAs Schottkys did not exhibit significant change in their I-V and C-V characteristics up to an absorbed dose as high as 1.5 × 107 rads. Diodes that were previously neutron-irradiated with consequent degradation were also subjected to Co60 irradiation, but no synergistic changes were observed.     

Conducting cryogel scaffold as a potential biomaterial for cell stimulation and proliferation

The aim of the study was to demonstrate the potential of the cryogelation technique for the synthesis of the conducting cryogel scaffolds which would encompass the advantages of the cryogel matrix, like the mechanical strength and interconnected porous network as well as the conductive properties of the incorporated conducting polymeric material, polypyrrole. The cryogels were synthesized using different combinations of oxidizing agents and surfactants like, sodium dodecyl sulfate (SDS)/ammonium persulfate (APS), SDS/iron chloride (FeCl₃), cetyl trimethyl ammonium bromide (CTAB)/APS, and CTAB/FeCl₃. The synthesized gels were characterized by scanning electron microscopic analysis for morphology, Fourier transform infrared spectroscopy for analyzing the presence of the polypyrrole (0.5–4 %) as nano-fillers in the gel. It was observed that the presence of these nano-fillers increased the swelling ratio by approximately 50 %. The synthesized conducting cryogels displayed high stress bearing capacity without being deformed as analysed by rheological measurements. The degradation studies showed 12–15 % degradation in 4 weeks time. In vitro studies with conducting and non-conducting cryogel scaffold were carried out to optimize the stimulation conditions for the two cell lines, neuro2a and cardiac muscle C2C12. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed approximately 25 and 15 % increase in the cell proliferation rate for neuro2a and C2C12 cell line, respectively. This was observed at a specific voltage of 100 mV and 2 V, for a specified duration of 2 h and 1 min, respectively for the conducting scaffold as compared to the control. This can play an important role in tissue engineering applications for cell lines where acquiring a high cell number and functionality is desired.