Effect of ozone treatment on the safety and quality of malting barley

Molds and their mycotoxins are an expensive problem for the malting and brewing industries. Deoxynivalenol (DON) is a mycotoxin that is associated with Fusarium spp. These fungi frequently cause Fusarium head blight in wheat and barley in the midwestern region of the United States; Manitoba, Canada; Europe; and China. Barley growers and malt producers would benefit from a postharvest control method for mold growth and DON production. We evaluated the use of gaseous ozone (O(3)) for preventing Fusarium growth and mycotoxin production while maintaining malt quality characteristics. Micromalting was performed in three replications under standard conditions. Ozone treatment was applied to malting barley during steeping via a submerged gas sparger. Ozone treatment conditions were 26 mg/cm(3) for 120 min after 2 and 6 h of steeping. The effects of gaseous ozone on DON, aerobic plate counts, Fusarium infection, and mold and yeast counts of barley throughout the malting process were measured. Various quality parameters of the malt were measured after kilning. Statistical tools were used to determine the significance of all results. Ozonation of malting barley during steeping did not lead to significant reductions in aerobic plate counts but did lead to a 1.5-log reduction in mold and yeast counts in the final malt. The influence of gaseous ozone on DON concentration was inconclusive because of the low initial concentrations of DON in the barley. Ozone significantly reduced Fusarium infection in germinated barley. Gaseous ozone did not negatively influence any aspect of malt quality and may have subtle beneficial effects on diastatic power and β-glucan concentrations.     

Concept of minimum electrospinning voltage in electrospinning of polyacrylonitrile N,N‐dimethylformamide system

Polyacrylonitrile solutions in N,N‐dimethylformamide (DMF) were electrospun into nanofibers by charging the polymer fluid in an electric field. Controlled experiments were performed using a needle type spinneret to investigate the effect of various electrospinning parameters on the percentage conversion of polymeric fluid into fibers and on fiber diameter obtained. It was found that when the polymeric fluid was continuously fed at a constant rate, application of a minimum electrospinning voltage (MEV) was necessary to “completely” convert the ejected fluid into nanojets to form nanofibers. Also, that the maximum amount of splitting or elongation that a polymeric fluid could undergo was primarily dependent on number of entanglements per chain in the fluid. This resulted in obtaining nanofibers with a particular diameter irrespective of the values of important electrospinning variables such as applied voltage, flow rates, and distance between the electrodes. On the other hand, MEV, necessary to obtain full conversion into nanofibers, was found to be strongly dependent on the spinning parameters and was unique for a given set of parameters. The significance of the MEV was evident from the fact that the square of the MEV, which is a measure of the electrical energy utilized by the system, was found to be directly proportional to the rate of formation of fiber surface area during the electrospinning process. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modeling evidence in support of coagulative nucleation theory

An extensive lumped model was developed for emulsion polymerization. It incorporated all of the complex processes: aqueous‐phase radical balances for all radical species arising from initiator decomposition and from exit; determination of radical number inside the particles by balance among rates of radical entry into, exit from, and termination inside the particles; determination of the monomer concentration inside the particles and in the aqueous phase by a thermodynamic equation; and particle formation by micellar, homogeneous, and coagulative nucleation. Model validation was done for the system with styrene (monomer), potassium persulfate (initiator), and sodium dodeceyl sulfate (emulsifier) and for the variables, which included the duration of nucleation, conversion at the end of nucleation, and total number of particles formed. The validation process revealed that coagulation during nucleation needed to be included in the model, even for emulsifier concentrations above the critical micelle concentration. The model predictions were in good quantitative agreement with the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Effect of Lactose Monolaurate and High Intensity Ultrasound on Crystallization Behavior of Anhydrous Milk Fat

Crystallization behavior of anhydrous milk fat (AMF) was studied with the addition of 0.025 and 0.05 % lactose monolaurate (LML). The crystallization behavior was studied at low (ΔT = 3 °C) and high supercooling (ΔT = 6 °C). Polarized light microscopy and laser turbidimetry indicated a delay in crystallization on addition of 0.025 % and 0.05 % LML or Tween 20 to AMF. High intensity ultrasound (HIU) was applied to AMF samples with 0.05 % LML and lower supercooling (T _c = 31 °C; ΔT = 3 °C). HIU application in AMF and AMF + 0.05 % LML induced crystallization (p < 0.05) changing the induction time (τ) at 31 °C from 34.20 ± 1.67 min (AMF) and 47.07 ± 1.27 min (AMF + 0.05 % LML) to 23.23 ± 3.26 min (AMF) and 25.00 ± 0.87 min (AMF + 0.05 % LML). Melting enthalpies (ΔH) of AMF were significantly higher (p < 0.05) than the ones observed for AMF + 0.05 % LML when crystallized without HIU, while enthalpy values increased significantly in AMF + 0.05 % LML samples when crystallized with HIU reaching similar values to the ones obtained for AMF without LML. The viscosity of AMF significantly decreased (p < 0.05) on addition of 0.05 % LML and significantly increased on HIU application.     

Highly conducting silver nanowire-polyacrylonitrile hollow fibres for flexible supercapacitors

A new approach for making stable, flexible, and conductive hollow fibres of poly (acrylonitrile) using dry-jet-wet spinning technique is investigated, wherein the inner walls of the poly (acrylonitrile) hollow fibres are deposited with silver nanowires using their dispersion in the bore fluid. The bore fluid plays a crucial role in determining the morphology and flexibility of the hollow fibres and entrapment of long silver nanowires on the inner walls. Fibres with AgNW layer having high conductivity of ~10⁴ Scm⁻¹ are obtained with the use of ~2 wt% of silver nanowires. The conducting fibres are successfully assembled into coaxial configuration to yield highly stable, flexible supercapacitors with capacitance value of 128 Fcm⁻³. The unique morphology of these conductive hollow fibres opens the possibility of making flexible and stable devices for wearable electronics.     

Therapeutic Targeting of the Tumour Microenvironment in Metastatic Colorectal Cancer

Liver metastasis is the primary contributor to the death of patients with colorectal cancer. Despite the overall success of current treatments including targeted therapy, chemotherapy, and immunotherapy combinations in colorectal cancer patients, the prognosis of patients with liver metastasis remains poor. Recent studies have highlighted the importance of the tumour microenvironment and the crosstalk within that determines the fate of circulating tumour cells in distant organs. Understanding the interactions between liver resident cells and tumour cells colonising the liver opens new therapeutic windows for the successful treatment of metastatic colorectal cancer. Here we discuss critical cellular interactions within the tumour microenvironment in primary tumours and in liver metastases that highlight potential therapeutic targets. We also discuss recent therapeutic advances for the treatment of metastatic colorectal cancer.     

Sugars as solid dispersion carrier to improve solubility and dissolution of the BCS class II drug: clotrimazole

Solid dispersion of poorly soluble BCS class II drug, clotrimazole, was prepared with the aim of enhancing its dissolution profile. Solid dispersions were prepared using various sugars as carriers at different weight ratio to drug-like d-mannitol, d-fructose, d-dextrose and d-maltose by fusion method. The solubility of plain clotrimazole in different percent of sugar solutions was measured. Also, its solubility in solid dispersion and their physical mixture were assessed. The dissolution of all the prepared SD tablets, direct compressed clotrimazole tablet and plain drug were tested using the U.S. Pharmacopeia convention (USP) apparatus II. The dissolution profiles were characterized by parameters like area under curve (AUC), mean residence time (MRT), mean dissolution time (MDT) and percent dissolution efficiency (% DE). The release kinetics study was performed using DD Solver TM software. The selected solid dispersions (SDs) were evaluated for antifungal activity. A 100% solution of mannitol showed 806-fold increases in solubility as compared with plain clotrimazole in water. It was observed that the dissolution profile of clotrimazole was improved by mannitol SD at drug to sugar ration of 1:3. The percent DE value for mannitol SD tablet was found to be 77.3516% as against plain drug and directly compressed tablet of clotrimazole at 50.9439% and 31.33%, respectively. Also the antifungal activity indicated by inhibition zone was found to be 54?mm indicating enhance activity against Candida albicans as compared with plain CTZ at 6.6?mm. Thus, it can be concluded that the sugar alcohol, that is, mannitol is a more promising hydrophilic carrier for solid dispersion preparation to improve the solubility and dissolution of poorly soluble drugs.     

Stimuli sensitive copolymer poly(N‐tert‐butylacrylamide‐ran‐acrylamide): Synthesis and characterization

Temperature sensitive random linear and crosslinked copolymers of N‐tert‐butylacrylamide (NTBA) and acrylamide (Am) were synthesized by the solution polymerization method, using regulated dosing of comonomer Am having a higher reactivity ratio (r_Am = 1.5) than NTBA (r_NTBA = 0.5). Copolymers with varying feed ratios of NTBA and Am (80 : 20 to 20 : 80 mol %) were synthesized and characterized. For the synthesis of copolymer hydrogels, N′, N‐methylene bisacrylamide (MBA) (1.13 mol %) was used along with monomers. The effect of composition on transition properties was evaluated for the linear copolymers and their hydrogels. A definite trend was observed. The incorporation of a higher percentage of the hydrophilic comonomer Am in the structure resulted in the shifting of the transition temperature towards a higher value. The transition temperatures of the copolymers synthesized with feed compositions of 80 : 20, 70 : 30, 60 : 40, 50 : 50, 40 : 60, 30 : 70, and 20 : 80 mol % were found to be 2, 10, 19, 27, 37, 45, and 58°C, respectively. Differential scanning calorimetry (DSC) studies confirmed the formation of random copolymers. The copolymers synthesized with a monomer feed ratio of 50 : 50 with regulated dosing showed a single glass transition temperature (T_g) at 168°C, while the copolymer synthesized with full dosing of Am at the beginning of the reaction showed two T_gs, at 134 and 189°C. The copolymer samples were analyzed by Fourier transform infrared spectroscopy (FTIR) for ascertaining the composition. The composition of the copolymers followed the trend of the feed ratio, but the incorporation of NTBA in the copolymers was found to be lower than the feed ratio because of lower than quantitative yields of the reactions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 672–680, 2005     

A direct variational method for planning monotonically optimal paths for redundant manipulators in constrained workspaces

This paper proposes a path planner for serial manipulators with a large number of degrees of freedom, working in cluttered workspaces. Based on the variational principles, this approach involves formulating the path planning problem as constrained minimization of a functional representing the total joint movement over the complete path. We use modified boundary conditions at both ends of the trajectory to find more suitable start and end configurations. The concept of monotonic optimality is introduced in order to optimize the manipulator paths between the resulting end configurations. For obstacle avoidance, volume and proximity based penalizing schemes are developed and used. The presented planner uses a global approach to search for feasible paths and at the same time involves no pre-processing task. A variety of test cases have been presented to establish the efficacy of the presented scheme in providing good quality paths. The extent of advantage accruing out of the measures of free end-configurations and monotonic optimality are also analyzed quantitatively.     

Distortional buckling in monosymmetric I-beams

This paper deals with distortional buckling of simply supported monosymmetric I-beams under three types of load: a central point load, a uniformly distributed load and a uniform sagging moment. ABAQUS is used for the investigation. Top-flange and bottom-flange load positions are considered for the first two load cases. It is found that for comparatively short beams, buckling may be governed by distortion of the web. Moment modification factors are calculated based on the present analysis, which accounts for the distortion of web and these are compared with those based on SSRC Guidelines, which are based on lateral-torsional buckling analysis only. It is seen that for short beams, provisions in SSRC Guide-1998 seriously overestimate the critical load.