Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Linear circuits: a measurement‐based approach

This paper proposes a new measurement‐based approach that can solve synthesis problems in unknown linear circuits. The method makes use of a small number of measurements to determine the functional dependency of any circuit signal or variable on any set of design variables. Once the functional dependency is obtained, the design requirements can be applied to find the design parameter values. The results are described for linear direct current and alternating current circuits. Copyright © 2013 John Wiley & Sons, Ltd.     

Poly(ethylene oxide)‐g‐gellan polysaccharide nanocarriers for controlled gastrointestinal delivery of simvastatin

Herein, a novel gellan polysaccharide‐based amphiphilic copolymer was synthesized for the development of simvastatin‐loaded micellar nanoparticles. The nanoparticles were explored for their controlled drug release and improved pharmacodynamic potentials. The copolymer was characterized by Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The onset of copolymer micellization was detected by fluorescence spectroscopy. Simvastatin was loaded into micellar particles by solvent evaporation method and the particles were then characterized by microscopic and light scattering techniques. The physical state of drug was studied by X‐ray diffraction analysis. Pharmacodynamic assessment of the micellar preparations was done on rabbit models. The copolymer formed micellar nanoparticles in water. Critical micellar concentration was 9.12mg/l. The micellar particles (426.8–912.6nm) entrapped a maximum of 18.86% drug. Higher negative zeta potential indicated physical stability of micellar systems. A simple diffusion mechanism was operative in the event of comparatively faster drug release in pH6.8 phosphate buffer solution. No significant drug‐copolymer interaction was traced by FTIR spectroscopy. The amorphization of drug into micellar particles reduced LDL‐cholesterol level by ～45% in hyperlipidemic rabbits and this was about 2.5 times higher than pure drug dispersion. Copolymer micellar nanoparticles of simvastatin could control cholesterol level in hyperlipidemic rabbits and thus had potential in drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42399.     

Novel organic–inorganic composite material as a cation exchanger from a triterpenoidal system of dammar gum: synthesis,characterization and application

A pioneer study has been conducted to synthesize novel hydrogel starting from a non-cellulosic raw material, gum dammar-a triterpenoidal system, and then converting this hydrogel into an organic–inorganic composite zirconium-based ion exchanger. Gum dammar was cross-linked with polyacrylamide zirconium (IV) iodo-oxalate [Gd-cl-poly(AAm)-Zr (IV) iodo-oxalate] by incorporating inorganic precipitates into the polymeric mixture. The polymeric mixture was synthesized using gum dammar (Gd), acrylamide (AAm), N, N′-methylene-bis-acrylamide (MBA) and potassium persulphate (KPS). The reaction conditions for synthesis of hydrogel and ion exchanger such as time (120 min), temperature (70 °C), solvent (4 mL), concentration of monomer (12.97 × 10^?3 mol/L), initiator (1.48 × 10^?4 mol/L), cross-linker (4.22 × 10^?4 mol/L) and ratio of zirconium oxychloride (0.1 M), potassium iodate (0.1 M) and oxalic acid (0.1 M) in ratio 2:3:2 were optimized to obtain maximum ion exchange capacity (2.02 meq/g). The morphology and structure of hydrogel and ion exchanger were studied using FTIR, SEM, XRD and TGA/DTA/DTG. The SEM study was followed by energy dispersive spectroscopy for elemental analysis. The ion exchanger was quite stable in various acids and bases at low concentration but it completely dissolved in acids and bases at high concentrations. Distribution studies showed that the synthesized ion exchanger had high selectivity for Pb²⁺ ions. Thus, the polymeric-inorganic hybrid material showed integration of both inorganic and organic characteristics within the composite material.     

Efficient synthesis of enwrapped CuO@rGO nanowire arrays to improve supercapacitor electrode performance

Journal of Applied Electrochemistry - There has been a growing interest in the performance of supercapacitors (SCs) based on Transition Metal Oxides (TMOs). It has recently been included in...     

Irradiated Ch/GG/PVP-based stimuli-responsive hydrogels for controlled drug release

Hydrogels based on gamma (γ) irradiated chitosan (pre-irradiated), guar gum, and polyvinyl pyrrolidone were crosslinked with various concentrations of (3-mercapto propyl)trimethoxysilane and fabricated by solution casting technique for the drug delivery applications. High molecular weight chitosan (Ch) possesses lower solubility and higher viscosity, these problems overcame by γ irradiation, which also generated hydrophilicity and effect of irradiated Ch on controlled drug release was assessed. FTIR analysis showed the development of chemical and physical interactions and confirmed the incorporation of characteristic peaks. SEM micrographs revealed porous structure of the prepared hydrogels. Swelling analysis of the hydrogels was performed in distilled water, buffer, and electrolyte mediums. All the hydrogel samples showed higher swelling at acidic pH and lower swelling at neutral and basic pH. These pH-responsive characteristics made these RCGP hydrogels an important contender for injectable controlled drug release. The ampicillin sodium drug was loaded and in vitro controlled release mechanism was evaluated in the PBS, SIF, and SGF which shown out of all prepared hydrogels (RCGP-1, RCGP-2, and RCGP-3), RCGP-1 has exhibited 87.4% release in PBS and 81.3% in SIF in 180 min.     

The Clinical Significance of Transfer RNAs Present in Extracellular Vesicles

Extracellular vesicles (EVs) are important for intercellular signalling in multi-cellular organisms. However, the role of mature transfer RNAs (tRNAs) and tRNA fragments in EVs has yet to be characterised. This systematic review aimed to identify up-to-date literature on tRNAs present within human EVs and explores their potential clinical significance in health and disease. A comprehensive and systematic literature search was performed, and the study was conducted in accordance with PRISMA guidelines. Electronic databases MEDLINE and EMBASE were searched up until 1 January 2022. From 685 papers, 60 studies were identified for analysis. The majority of papers reviewed focussed on the role of EV tRNAs in cancers (31.7%), with numerous other conditions represented. Blood and cell lines were the most common EV sources, representing 85.9% of protocols used. EV isolation methods included most known methods, precipitation being the most common (49.3%). The proportion of EV tRNAs was highly variable, ranging between 0.04% to >95% depending on tissue source. EV tRNAs are present in a multitude of sources and show promise as disease markers in breast cancer, gastrointestinal cancers, and other diseases. EV tRNA research is an emerging field, with increasing numbers of papers highlighting novel methodologies for tRNA and tRNA fragment discovery.