Discontinuous Precipitation and Phase Stability In Re- and Ru-Containing Nickel-Base Superalloys

The phase stability of nickel-base superalloys has been investigated using a new in-house-designed alloy series with stepwise increased additions of Re and Ru at otherwise fixed atomic fractions of alloying elements. Results presented in this study are focused on the lesser-known topologically closed packed (TCP) formation of columnar colonies or so-called discontinuous precipitation. A detailed investigation of these colonies allowed for identifying compositional changes during the growth process and for providing a three-dimensional (3-D) illustration of the TCP phases within these colonies. The results were used to compare the colony growth process with existing growth models. Furthermore, the influence of Re and Ru on the appearance of discontinuous precipitation has been investigated by means of colony width and the effect on creep properties. Larson-Miller plots are given to illustrate the creep strength of directionally solidified samples with and without TCP colonies compared with single crystalline samples free from TCP colonies.     

Canadian Field Soils I. Mineral Composition by XRD/XRF Measurements

Forty Canadian soils were laboratory tested for the presence of quartz and other minerals using X-ray diffraction/X-ray fluorescence techniques. On average, the highest quartz content was observed in soil samples from sites in Nova Scotia followed by Prince Edward Island sites, whereas soil sample from British Columbia sites had the lowest quartz content. The second most abundant mineral was albite that mainly occurred in soil samples from Ontario and Quebec sites. Illite was the third most abundant and prevailed in soils mainly from British Columbia and New Brunswick sites. Soil samples from British Columbia sites had the highest combined clay and silt content and were composed of illite, albite, kaolinite, and chlorite. The lowest clay content was found in the samples from the Quebec sites. The highest microcline (a potassium feldspar) content was observed in Quebec, Ontario, and Prince Edward Island sites. In contrast to other provinces, samples from Quebec and Ontario sites also included amphibole. Soil samples from Saskatchewan and Manitoba sites also comprised carbonates, i.e., calcite and dolomite. Iron oxides (e.g., goethite) were present in all soils, except the Quebec sites, but their occurrence was rather insignificant.     

Thermal acceptability assessment in buildings located in hot and humid regions in Brazil

The objective of this paper was to perform an analysis on thermal acceptability in naturally ventilated (NVB) and air-conditioned buildings (ACB) located in hot and humid climates in Brazil. Experiments were carried out in April and November 2005 with 1.301 questionnaires based on ISO 10551:1995(E). Indoor and outdoor climatic variables were monitored simultaneously. The results revealed that 53% of the occupants of NVB and 78% of ACB were thermally satisfied. However, some restrictions were observed with the applications of the following methodologies: ISO/FDIS 7730:2005(E); ANSI/ASHRAE Standard 55:2004; Adaptive Temperature Limits (ATG) and prEN15251: 2005(E). Differences were observed between thermal sensation (TSV) and predicted mean vote (PMV) and between the subject's percentages expressing thermal unacceptability of the environment and the PPD calculated according to ISO/FDIS 7730:2005(E).     

Rheotens-mastercurves and drawability of polymer melts

In a Rheotens experiment, the tensile force needed for elongation of an extruded filament is measured as a function of the draw ratio. For thermo-rheologically simple polymer melts, the existence of Rheotens-mastercurves is proven. Rheotens-mastercurves are invariant with respect to changes in melt temperature. Also, for polymer melts with different average molar masses, but similar molar mass distribution and branching structure, Rheotens-mastercurves are invariant to changes in the average molar mass. It is shown, by testing several polyethylenes with different molar mass distribution and different long-chain branching, that Rheotens-mastercurves allow a direct and quantitative assessment of the drawability of polymer melts under actual processing conditions, i.e. under the action of a constant tensile force and including the effects of the rheological prehistory in the extrusion die.     

The significance of microcomposites as experimental models

This paper demonstrates the usefulness of careful experimental work with model composite materials, such as thin polymeric films in which single fibers are accurately positioned, in at least two respects: to assess the validity of a theory for a given physical property, and to accurately probe the effects of various parameters on the behavior of composites. Working with such model composites has obvious advantages, such as the full control of experimental parameters, the possibility of introducing perturbative effects in a controlled way, and the possibility of verifying theoretical models in the range of low fiber content. Indeed, macroscopic composite materials contain various types of defects and perturbative effects, such as fiber misalignment or slack, fiber-poor regions, voids, etc., which bias any quantitative assessment of mechanical and physical properties, and preclude the accurate verification of theoretical schemes. One difficulty in working with microcomposite models, also recalled here, is the need for an appropriate “scaling-up” procedure to the level of macroscopic composites.     

Donorsubstituierte 2,4-Diazacyclopentadienone und indigoide 1,3,5,7-Tetraazafulvalene

Donor Substituted 2,4-Diazacyclopentadienones and Indigoid 1,3,5,7-Tetraazafulvalenes Hydrolysis of tris(diethylamino)imidazolylium chloride gives rise to 2,5-bis-diethyl-amino-4H-imidazolin-4-one; thiolysis leads, depending on conditions, to 2,5-bis-diethylamino-4H-imidazolin-4-thione or potassium 2,6-bis-diethylamino-1,3,5,7-tetraazafulvalene-4,8-dithiolate. The latter can be protonated to form green 2,6-bis(dimethylamino)-3,4,7,8-tetrahydro-1,3,5,7-tetraaza-fulvalen-4,8-dithione, a new indigoid compound, and alkylated to give blue 2,6-bis-diethylamino-4,8-bis-alkylthio-1,3,5,7-tetraazafulvalenes. Treatment of 2,5-bis-diethylamino-4H-imidazolin-4-thione with copper furnishes 2,6,4,8-tetrakis-diethylamino-1,3,5,7-tetraazafulvalene. – Oxidation of 2,6-bis-dimethylamino-3,4,7,8-tetrahydro-1,3,5,7-tetraazafulvalen-4,8-dithione gives rise to (2,2′-bis-diethylamino-4,4′-bi(4H-imidazol)-5,5′-dithione, corresponding to dehydroindigo, and reduction leads to a colorless compound, corresponding to leucoindigo.     

Quality of comminuted sausages formulated from mechanically deboned poultry meat

Comminuted sausages formulated with mechanically deboned poultry meat-MDPM (turkey or chicken, frame or neck) treated in different ways before production (vacuum packed MDPM or air packed skeletons deboned at production) and stored frozen for 6 or 18 weeks have been studied using a full-factorial design and chemical, physical and sensory analysis. MDPM was obtained from a Beehive separator. Comminuted sausages with MDPM from turkey frames, stored at -25?°C as skeletons, packed in air for 18 weeks developed marked rancid odour and flavour which could also be detected by thiobarbituric acid reactive substances (TBARS) and the concentration of volatile compounds. Vacuum packed mechanically deboned meat irrespective of species and carcass part could be stored for up to 18 weeks and used in formulation of sausages without any serious changes in their sensory profiles. Instrumental colour differences between sausages were mainly due to species. Turkey sausages were darker, redder and less yellow than chicken sausages. Moisture and fat contents were influenced by carcass part and to a lesser extent depended on species and storage time. Principal least squares regression (PLS2) showed close relationships between instrumental parameters and sensory attributes. TBARS, hexanal and volatile compounds were highly correlated with rancid flavour while redness (a(?)) was strongly related to sensory colour hue and colour strength.