积层多层板用UV油墨的合成研究

采用丙烯酸改性环氧树脂E－44的方法，合成了环氧丙烯酸酯预聚物，并将其用在UV光固化油墨的配方中。在树脂合成过程中，研究了反应温度，催化剂，阻聚剂等因素对合 产品的影响。通过L9(3^4)正交试验，得到了优化的工艺参数：反应温度为90℃，催化剂为N，N－二甲苯胺，用量1％；阻聚剂对苯二酚，用量0．5％，投料环氧树脂和丙烯酸的摩尔比为1：1．08。     

Developments in HSLA steel products

The technology of microalloyed steels is expanding beyond its original emphasis on low-carbon, severely control-rolled strip and plate products. A variety of economical, high-strength, tough, as-rolled or as-forged microalloyed products are replacing more expensive heat-treated steels. Recrystallization-controlled rolling is being utilized to produce very fine ferrite grain sizes and good toughness in strip, plate and bar products processed with relatively high rolling temperatures. High-strength microalloyed long products such as railroad joint bars, truck frame rails and flat bars for truck trailer construction are replacing heat-treated parts. Microalloyed, medium-carbon forging steels are used extensively for automobile engine and suspension components. Fully pearlitic high-carbon rods are being microalloyed to enhance the properties of wire and springs.     

High quality voice conversion using prosodic and high-resolution spectral features

Voice conversion methods have advanced rapidly over the last decade. Studies have shown that speaker characteristics are captured by spectral feature as well as various prosodic features. Most existing conversion methods focus on the spectral feature as it directly represents the timbre characteristics, while some conversion methods have focused only on the prosodic feature represented by the fundamental frequency. In this paper, a comprehensive framework using deep neural networks to convert both timbre and prosodic features is proposed. The timbre feature is represented by a high-resolution spectral feature. The prosodic features include F0, intensity and duration. It is well known that DNN is useful as a tool to model high-dimensional features. In this work, we show that DNN initialized by our proposed autoencoder pretraining yields good quality DNN conversion models. This pretraining is tailor-made for voice conversion and leverages on autoencoder to capture the generic spectral shape of source speech. Additionally, our framework uses segmental DNN models to capture the evolution of the prosodic features over time. To reconstruct the converted speech, the spectral feature produced by the DNN model is combined with the three prosodic features produced by the DNN segmental models. Our experimental results show that the application of both prosodic and high-resolution spectral features leads to quality converted speech as measured by objective evaluation and subjective listening tests.     

Experimental dynamic characterizations and modelling of disk vibrations for HDDs

Currently, the rotational speed of spindle motors in HDDs (Hard-Disk Drives) are increasing to improve high data throughput and decrease rotational latency for ultra-high data transfer rates. However, the disk platters are excited to vibrate at their natural frequencies due to higher air-flow excitation as well as eccentricities and imbalances in the disk-spindle assembly. These factors contribute directly to TMR (Track Mis-Registration) which limits achievable high recording density essential for future mobile HDDs. In this paper, the natural mode shapes of an annular disk mounted on a spindle motor used in current HDDs are characterized using FEM (Finite Element Methods) analysis and verified with SLDV (Scanning Laser Doppler Vibrometer) measurements. The identified vibration frequencies and amplitudes of the disk ODS (Operating Deflection Shapes) at corresponding disk mode shapes are modelled as repeatable disturbance components for servo compensation in HDDs. Our experimental results show that the SLDV measurements are accurate in capturing static disk mode shapes without the need for intricate air-flow aero-elastic models, and the proposed disk ODS vibration model correlates well with experimental measurements from a LDV.     

Renal proliferative and phenotypic changes in rats with two-kidney, one-clip Goldblatt hypertension

Previous research in this laboratory has shown that preweaning and postweaning juvenile meadow voles, Microtus pennsylvanicus, can acquire a spatial task, the Morris water-maze task. The present study examined the influence of age of juvenile acquisition ("before weaning" (BW; Day 10 and 15 after birth) and "after weaning" (AW; Day 20 and 25 after birth)) of a spatial task on subsequent re-acquisition of the same hidden-platform spatial water-maze task. This study also compared sex differences and litter sex-ratio effects on reacquisition performance. Fifteen litters of adults were re-tested in the same water maze 6 weeks after being initially tested as juveniles. All analyses were conducted using a covariate that removed the group differences in the original task performance. Adult voles from female-biased litters, that had previously learned the task at an older juvenile age (AW), reacquired the same task faster than adults that had previously learned the task at a younger juvenile age (BW). In the adult BW group there was also a significant litter sex-ratio effect such that voles born into a female-biased litter re-acquired the task more slowly than did voles born into a male-biased litter. There were no significant sex or litter sex-ratio effects on spatial learning in the AW group. These results show that adult meadow voles can require a spatial task more quickly if they initially learned the task at an older juvenile age, suggestive of a period of infantile amnesia. In addition, these results indicate that the litter sex-ratio can affect adult spatial performance, suggesting that the relative amount of androgens in utero may influence the development of sexually-dimorphic spatial ability in adulthood.     

Optimization of sodium sulfide treatment of rice straw to increase the enzymatic hydrolysis in bioethanol production

The efficiency of sodium sulfide-assisted alkaline pulping for cellulose preparation from Oryza sativa L. rice straw in Vietnam for enzymatic saccharification was investigated. The response surface methodology was used for the determination of optimal technological parameters of alkaline pulping such as active alkali dosage, temperature and time. The optimal technological parameters were established to be active alkali dosage of 7%, treatment temperature of 100 °C and treatment time of 120 min. At these regimes, a maximal sugar yield of 51.8% (over dry rice straw) was obtained. It meant that the saccharification efficiency up to 97.1% could be achieved by using sodium sulfide-assisted alkaline pretreatment method. Addition of sodium sulfide into alkaline pretreatment resulted in higher sugar yield, higher level of depolymerization of lignin and less loss of cellulose. Moreover, liquid hydrolyzate after enzymatic hydrolysis was analyzed by HPLC to determine the compositions of sugar mixture. The fiber morphology in pretreated biomass solid was also revealed by SEM.     

A generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates based on isogeometric analysis

This paper presents a generalized layerwise higher-order shear deformation theory for laminated composite and sandwich plates. We exploit a higher-order shear deformation theory in each layer such that the continuity of the displacement and transverse shear stresses at the layer interfaces is ensured. Thanks for enforcing the continuity of the displacement and transverse shear stresses at an inner-laminar layer, the minimum number of variables is retained from the present theory in comparison with other layerwise theories. The method requires only five variables, the same as what obtained from the first- and higher-order shear deformation theories. In comparison with the shear deformation theories based on the equivalent single layer, the present theory is capable of producing a higher accuracy for inner-laminar layer shear stresses. The free boundary conditions of transverse shear stresses at the top and bottom surfaces of the plate are fulfilled without any shear correction factors. The discrete system equations are derived from the Galerkin weak form, and the solution is obtained by isogeometric analysis (IGA). The discrete form requires the C¹ continuity of the transverse displacement, and hence NURBS basis functions in IGA naturally ensure this condition. The laminated composite and sandwich plates with various geometries, aspect ratios, stiffness ratios and boundary conditions are studied. The obtained results are compared with the 3D elasticity solution, the analytical as well as numerical solutions based on various plate theories.