A Cost-Efficient and Simple Plant Oil DNA Extraction Protocol Optimized for DNA-Based Assessment of Product Authenticity

DNA-based assays offer precision in ascertaining the species/cultivar origin of agro-food products. Yet, obtaining DNA of sufficient quality and quantity is the main challenge while performing DNA-based food authentication analyses. The aim of the present work was to standardize a cost-efficient, easy-to-apply, yet effective plant oil DNA isolation protocol that allows reliable downstream PCR-based analyses. Because capillary electrophoresis (CE) separation of species/cultivar discriminating genomic fragments is a widely adopted approach in food genomics, a CE system was utilized in order to assess the performance of the proposed cetyl trimethyl ammonium bromide (CTAB)-based protocol. A plastid intergenic spacer and a nuclear olive gene were used as targets in order to evaluate the amplificability of DNA extracted with the CTAB-based protocol. The plastid barcode not only allowed assessing the reproducibility of PCR amplifications from the extracted oil DNA samples (olive, hazelnut, corn, rapeseed, cottonseed, and soybean oils) but also proved successful in discriminating all tested oil crop species based on amplified fragment length polymorphisms. Moreover, the barcode assay proved successful in correctly identifying the tested olive oil: cottonseed oil blends as admixtures of the two oil species. Thus, it was also feasible to demonstrate the potential of the barcode sequence as a discriminatory analyte to detect adulteration in plant oils. In addition, application of a CAPS (cleaved amplified polymorphic sequence) assay designed to genotype a nuclear SNP (single nucleotide polymorphism) marker resulted in the successful identification of the two single-cultivar olive oils included in the study. As a result of the present work, it was feasible to standardize a reliable and cost-efficient DNA extraction protocol that works well with both unrefined (olive and hazelnut) and refined (corn, rapeseed, cottonseed, and soybean) oils.     

Mitochondria-targeted disruptors and inhibitors of cytochrome c/cardiolipin peroxidase complexes: a new strategy in anti-apoptotic drug discovery

The critical role of mitochondria in programmed cell death leads to the design of mitochondriotropic agents as a strategy in regulating apoptosis. For anticancer therapy, stimulation of proapoptotic mitochondrial events in tumor cells and their suppression in surrounding normal cells represents a promising paradigm for new therapies. Different approaches targeting regulation of components of mitochondrial antioxidant system such as Mn-SOD demonstrated significant antitumor efficiency, particularly in combination therapy. This review is focused on a newly discovered early stage of mitochondria-dependent apoptosis - oxidative lipid signaling involving a mitochondria-specific phospholipid cardiolipin (CL). Cytochrome c (cyt c) acts as a CL-specific peroxidase very early in apoptosis. At this stage, the hostile events are still secluded within the mitochondria and do not reach the cytosolic targets. CL oxidation process is required for the release of pro-apoptotic factors into the cytosol. Manipulation of cyt c interactions with CL, inhibition of peroxidase activity, and prevention of CL peroxidation are prime targets for the discovery of anti-apoptotic drugs acting before the "point-of-no-return" in the fulfillment of the cell death program. Therefore, mitochondria-targeted disruptors and inhibitors of cyt c/CL peroxidase complexes and suppression of CL peroxidation represent new strategies in anti-apoptotic drug discovery.     

A complementary study on novel PdAuCo catalysts: Synthesis,characterization, direct formic acid fuel cell application,and exergy analysis

At present, Pd containing (10–40 wt%) multiwall carbon nanotube (MWCNT) supported Pd monometallic, Pd:Au bimetallic, and PdAuCo trimetallic catalysts are prepared via NaBH₄ reduction method to examine their formic acid electrooxidation activities and direct formic acid fuel cell performances (DFAFCs) when used as anode catalysts. These catalysts are characterized by advanced analytical techniques as N₂ adsorption and desorption, XRD, SAXS, SEM-EDX, and TEM. Electronic state of Pd changes by the addition of Au and Co. Moreover, formic acid electrooxidation activities of these catalysts measured by CV indicates that particle size changes in wide range play a major role in the formic acid electrochemical oxidation activity, ascribed the strong structure sensitivity of formic acid electrooxidation reaction. PdAuCo (80:10:10)/MWCNT catalyst displays the most significant current density increase. On the other hand, lower CO stripping peak potential obtained for PdAuCo (80:10:10)/MWCNT catalyst, attributed to the awakening of the Pd-adsorbate bond strength down to its optimum value, which favors higher electrochemical activity. DFAFCs performance tests and exergy analysis reveal that fuel cell performances increase with the addition of Au and Co which can be attributed to synergetic effect. Furthermore, temperature strongly influences the performance of formic acid fuel cell.     

Mechanical and rheological behavior of highly filled polystyrene with lignin

The mechanical, rheological, and morphological properties of polystyrene (PS)/lignin blends over a wide range of lignin content (0–80 wt%) have been studied in this work. PS/lignin blends were compounded in an internal batch mixer with and without the addition of a linear triblock copolymer based on styrene, ethylene, and butylene (SEBS). A morphological analysis was carried out by scanning electron microscopy to determine the state of dispersion and the interfacial adhesion between the lignin particles and the PS matrix. It was found that the flexural and torsion moduli both increased, while the tensile properties decreased with increasing lignin content. Nevertheless, compatibilizer addition was found to improve the tensile properties of the lignin/PS blend. The shear rheological behavior of the lignin/PS blends was also studied in this work where viscosity, dynamic moduli, and activation energy were found to be very sensitive to both lignin and compatibilizer contents. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze

The effect of the type and the amount of hardeners, such as ammonium nitrate, ammonium carbonate and nitric acid on the molasses bonded briquettes prepared from anthracite fines or coke breeze were investigated. Amongst the hardener studied the best results were obtained with 2.5% ammonium nitrate hardener. The briquettes produced with this hardener were highly water resistant but not waterproof and their tensile strengths were not adequate to be used as a substitute for the metallurgical coke. Therefore, the briquettes were prepared with molasses containing 2.5% ammonium nitrate hardener and air blown coal tar pitch blended binder. When the blended binder was used for the production of anthracite fines or coke breeze briquettes, after curing at 200 °C for 2 h, they became waterproof and their tensile strengths were found to be sufficient to be used as a substitute for coke oven coke. The briquettes after curing could be directly charged into the blast furnace without carbonizing them at high carbonization temperatures. Since molasses and coal tar pitch, are relatively cheap and readily available materials, the process investigated could be economical way of producing high quality formed coke.     

An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.     

Synthesis and polymerizations of novel bisphosphonate‐containing methacrylates derived from alkyl α‐hydroxymethacrylates

The synthesis and polymerizations of four novel bisphosphonate‐containing monomers are reported. The monomers were synthesized from reaction of ethyl and tert‐butyl α‐bromomethacrylates with 3,3‐bis(diethoxyphosphoryl)propanoic acid or with tetraethyl 4‐hydroxybutane‐1,1‐diyldiphosphonate. Their thermal bulk polymerizations, photopolymerizations and copolymerizations with poly(ethylene glycol) methyl ether methacrylate were investigated. The homopolymerizations resulted in polymers with values of 25 000–83 000 g mol^?1; the copolymerizations yielded soluble polymers with 22–34% incorporation of the new monomers; the photopolymerizations gave some structure–reactivity correlation; and one of the homopolymers, upon hydrolysis of its bisphosphonate groups, could interact with hydroxyapatite. © 2013 Society of Chemical Industry     

Synthesis,structural characterization,and antiproliferative/cytotoxic effects of a novel modified poly(maleic anhydride-co-vinyl acetate)/doxorubicin conjugate

Polymer Bulletin - Drug carrier, poly(maleic anhydride-co-vinyl acetate) (MAVA or poly[MA-co-VA]) copolymer, was traditionally synthesized by free radical chain polymerization reaction, in methyl...     

Synthesis and photopolymerization of novel,highly reactive phosphonated-urea-methacrylates for dental materials

An urea methacrylate (1) and two phosphonated methacrylates (2–3) were synthesized from 2-isocyanatoethyl methacrylate (IEM) and benzyl amine (1), diethyl aminomethylphosphonate (2) and diethyl amino(phenyl)methylphosphonate (3). Their photopolymerization rates are notably higher than commercial monomers, despite the presence of only one double bond. Their polymerization rates follow the order 1 ～ 2 > 3 ～ triethylene glycol dimethacrylate (TEGDMA) > 2-hydroxyethyl methacrylate (HEMA). A tendency toward high crosslinking density during thermal bulk polymerizations, low oxygen sensitivity and high conversions with benzophenone during photopolymerization indicated the importance of hydrogen abstraction/chain transfer reactions. It was found that the addition of the monomers to HEMA significantly increased its polymerization rate, proving their utility as replacements for TEGDMA as reactive diluents for 2,2-bis[4-(2-hydroxy-3-methacryloyloxy propyloxy) phenyl] propane (Bis-GMA). Copolymer systems containing 2 and 3 showed improved T_g values compared to Bis-GMA/TEGDMA systems.