Procreated C displacement generic plate vibration model

Procreation of the C¹ continuous displacement FE efficient vibration model, which can be attained by exploiting the unparalleled conciseness and cost-objectiveness of a computer automated exact analytical integrator, is considered. The proposed Kirchhoff-conforming, rectangular four dof/node plate FE vibration simulator is demonstrated to achieve high accuracy with low CPU expenditure in a straightforward and systematic framework without calling for any ad hoc mechanisms. Due to idiosyncrasies of the formulation, the code has the potential for providing high-speed computational power to aid accurate and reliable identification of a wide spectrum of vibration modes that faithfully captures the physical behavior of thin plates, frequently encountered in real-life engineering applications.     

Extraction of Avgamasya asphaltite with sub- and supercritical solvents

The yields and the nature of the products from the solvent extraction of Avgamasya asphaltite of SE Turkey with benzene and toluene under Soxhlet, subcritical (up to 292 °C) and supercritical (350–450 °C) conditions are reported. The subcritical yield increases with temperature but also depends on pressure; the extra yield is mainly of asphaltenes. The 350 °C supercritical toluene extract shows little evidence of thermal degradation and is similar in yield and chemical nature to that obtained under subcritical conditions except that it contains more pentane-soluble material. At 450 °C the yield is increased and a number of pyrolytic effects are observed, including reduction in molecular mass, loss of heterocyclic and alkyl groups and the presence of toluene decomposition products.     

Poly(2‐hydroxyethyl methacrylate)/boric acid composite hydrogel as soft contact lens material: Thermal,optical, rheological,and enhanced antibacterial properties

The present work proposes to fabricate a composite hydrogel material that well characterized, transparent, biocompatible, and self‐antibacterial as potential soft contact lens material. For this purpose, poly(2‐hydroxyethyl methacrylate) (PHEMA)/boric acid (BA) composite hydrogels were successfully prepared by chemical crosslinking with BA through in situ polymerization using different BA ratios between 1 and 10% w/w. Afterward, the compositions, thermal stability, transparence, oxygen permeability, water uptake capacity, swelling ratio as well as morphological and rheological properties, in vitro degradability, in vitro cytotoxicity, and antibacterial properties of the all prepared materials were analyzed using a series of different techniques. The thermal stability, hydrophilicity, water uptake, oxygen permeability gradually increased depending ratio of BA, which is desirable for biomaterial. While the transparence and refractive index decreased, the composite hydrogels, except for BA content of 10 wt %, maintained enough transparency to be used for contact lens. In addition, PHEMA/BA composite hydrogels exhibited good cytocompatibility (PHEMA‐1%BA and PHEMA‐3%BA) and excellent antibacterial activity against Gram‐positive (Staphylococcus aureus and Enterococcus faecium) and Gram‐negative (Escherichia coli and Pseudomonas aeruginosa) bacteria. Overall, the results demonstrated that the obtained PHEMA/BA composite hydrogels could be considered as self‐antibacterial contact lens and a potential composite biomaterial for other applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46575.     

Developing Predictive Equations to Model the Visual Demand of In-Vehicle Touchscreen HMIs

Touchscreen human–machine interfaces (HMIs) are commonly employed as the primary control interface and touch-point of vehicles. However, there has been very little theoretical work to model the demand associated with such devices in the automotive domain. Instead, touchscreen HMIs intended for deployment within vehicles tend to undergo time-consuming and expensive empirical testing and user trials, typically requiring fully functioning prototypes, test rigs, and extensive experimental protocols. While such testing is invaluable and must remain within the normal design/development cycle, there are clear benefits, both fiscal and practical, to the theoretical modeling of human performance. We describe the development of a preliminary model of human performance that makes a priori predictions of the visual demand (total glance time, number of glances, and mean glance duration) elicited by in-vehicle touchscreen HMI designs, when used concurrently with driving. The model incorporates information theoretic components based on Hick–Hyman Law decision/search time and Fitts’ Law pointing time and considers anticipation afforded by structuring and repeated exposure to an interface. Encouraging validation results, obtained by applying the model to a real-world prototype touchscreen HMI, suggest that it may provide an effective design and evaluation tool, capable of making valuable predictions regarding the limits of visual demand/performance associated with in-vehicle HMIs, much earlier in the design cycle than traditional design evaluation techniques. Further validation work is required to explore the behavior associated with more complex tasks requiring multiple screen interactions, as well as other HMI design elements and interaction techniques. Results are discussed in the context of facilitating the design of in-vehicle touchscreen HMI to minimize visual demand.     

Self-standing piezoelectric nanogenerator fabrics from ZnO-doped PVDF nanofiber yarns

Today a wide variety of wearable electronics are in our daily lives and their uses are increasing. The development of portable, flexible, lightweight, cost-effective, and stable devices that produce sustainable energy with renewable approaches in the field of wearable electronics, as in every field, is one of the important issues of today. According to their volume and weight, the use of nanofibers with high surface area in energy-generating devices may bring them advantages such as lightness and higher energy density. Therefore, in recent years, researchers have focused on the development of nanofiber-based nanogenerators that produce energy using mechanical energy in a sustainable and renewable way. In this paper, self-standing piezoelectric nanogenerator (PENG) fabrics were obtained by developing flexible composite poly(vinylidene fluoride) (PVDF) nanofiber yarns doped with zinc oxide (ZnO) nanoparticles at different rates to provide higher power output. It has been characterized from electromechanical, structural, and morphological aspects. The most successful self-standing PENG fabric obtained (at 5% ZnO loading) doubled the energy output of the fabric made from pure PVDF nanofiber yarn and provided a peak total power of 81 μW and a power density of 30 μW/cm². The present results open up the field for the development of PVDF/ZnO-based nanomats and their use in sensors and actuators in the healthcare and engineering industries.     

Preparation of chitosan‐coated magnetite nanoparticles and application for immobilization of laccase

In this study, immobilization of laccase (L) enzyme on magnetite (Fe₃O₄) nanoparticles was achieved, so that the immobilized enzyme could be used repeatedly. For this purpose, Fe₃O₄ nanoparticles were coated and functionalized with chitosan (CS) and laccase from Trametes versicolor was immobilized onto chitosan‐coated magnetic nanoparticles (Fe₃O₄‐CS) by adsorption or covalent binding after activating the hydroxyl groups of chitosan with carbodiimide (EDAC) or cyanuric chloride (CC). For chitosan‐coated magnetic nanoparticles, the thickness of CS layer was estimated as 1.0–4.8 nm by TEM, isoelectric point was detected as 6.86 by zeta (ζ)‐potential measurements, and the saturation magnetization was determined as 25.2 emu g^?1 by VSM, indicating that these nanoparticles were almost superparamagnetic. For free laccase and immobilized laccase systems, the optimum pH, temperature, and kinetic parameters were investigated; and the change of the activity against repeated use of the immobilized systems were examined. The results indicated that all immobilized systems retained more than 71% of their initial activity at the end of 30 batch uses. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Natural frequency analysis of lattice boom crane theoretically and experimentally

International Journal of Steel Structures - Having knowledge of dynamic properties named as natural frequency and mode shapes during the design process is important to determine proper design...     

Influences of sex and seasons on levels of heavy metals in tissues of green tiger shrimp (Penaeus semisulcatus de Hann, 1844)

Seasonal changes in heavy metal (Ag, Cr, Ni, Pb, Cu, Fe, Zn) concentrations in muscle, gill, hepatopancreas and gonad tissues of both male and female green tiger shrimp (Penaeus semisulcatus) from Iskenderun Bay (Northern East Mediterranean Sea, Turkey) were measured for a year period by using ICP-AES. The relationships in various heavy metal concentrations in organs were compared according to sex and seasons. Heavy metal content varied with type of metals, seasons and sex. Accumulations also differed significantly in certain organs. Metal concentrations (as μg g⁻¹ w.w.) were highest in male gonads whereas lowest in the muscle of all shrimp species. From the human consumption point of view, heavy metal concentrations except for copper in male and female green tiger shrimp’s muscle were below the admissible limits. Thus, precautions should be taken on account of higher content of heavy metals as well as in other organs that could be affected by industrial pollution.     

Phenolic resin binder for the production of metallurgical quality briquettes from coke breeze: Part II the effect of the type of the basic catalyst used in the resol production on the tensile strength of the formed coke briquettes

In order to develop a new and cost effective formed coke production process which does not require higher temperature carbonization stage, coke breeze was briquetted with resol binders and the change in the tensile strength of the briquettes with the amount and the type of the alkaline metal hydroxides, alkaline earth metal oxides, their carbonates and amine catalysts were studied. It was recognized that carbonates of alkaline or alkaline earth metals have a modifying effect on the properties of resol binders which results in briquettes of higher tensile strength than the resol produced with hydroxide or oxides of these metals. The average tensile strength of the briquettes was found to be much higher with the sodium carbonates catalyzed resol used as binder comparing with sodium hydroxide catalyzed resoles. The former was 45.40 MPa while the latter was 33.72 MPa. Although triethanolamine catalyzed resol, resulted in the briquettes of the highest tensile strength (53.43 MPa), among the catalyst studied in this work, due to flammability caused by triethanolamine, it was found unsuitable for this purpose.