Long and short‐term assessment of surface area changes in saline and freshwater lakes via remote sensing

Advances in remote sensing technology enable monitoring and detection of these vulnerable water bodies that bear numerous functions and ecological services beyond their intended use. As such, valuable data and information may be provided for long and short‐term analyses and stored in a database for future projections. This paper initially grouped 18 natural lakes of the Konya Closed Basin of Turkey according to their salinity level. Freshwater, saline and brackish lakes have then undergone temporal analysis for every 5‐year intervals via Landsat satellite images. Freshwater lake surfaces have not changed noticeably during the inspection period; however, saline waters have decreased in surface area by 32%. Beysehir Lake constituting 94% of the freshwater category and Tuz Lake representing 97% of the saline group were selected for the short‐term analysis that was monthly conducted for years 2017 and 2018 with optical and SAR images to better verify cause and effect relationship.     

Influence of Sliding Rate and Load with Friction on NiTi Shape Memory Alloy Wear Resistance

Metal Science and Heat Treatment - The effect of load and sliding rate on wear resistance of a NiTi alloy in martensitic and austenitic conditions with dry friction by a ball–disk scheme is...     

In situ investigation of surfactants’ effect onto electrochemical synthesis and properties of polyfurans

Polyfuran (PFu) films were electrochemically deposited onto gold electro-quartz crystal microbalance (EQCM) electrodes using acetonitrile (ACN)/LiClO₄ solvent-electrolyte in presence of dodecylbenzenesulfonic acid (anionic, DBSA) and polyethylene glycol sorbitan monolaurate (non-ionic, Tween 20) surfactants. The effect of surfactants on structural and conductivity properties of the polymer films was investigated using Fourier transform-infrared spectroscopy (FT-IR) and four-probe conductivity measurements. The doping effects of surfactants onto the properties of PFu were correlated with mass gain using in situ EQCM. The conductivity of PFu polymer was measured for PFu with no surfactant and for PFu in presence of two surfactants (Tween 20 and DBSA). Our data indicate that although a fast polymerization, a sharp shift in the frequency and mass changes of the polymer films as well as the highest recorded conductivity of 0.048 S cm^?1 were all obtained for the PFu/Tween 20-2 sample, significantly more PFu films formed with PFu/DBSA than with PFu/Tween 20 samples. We concluded that more PFu films can be obtained when an oxidant and an anionic surfactant (DBSA) are used than when an oxidant is used alone, or when an oxidant is used with a non-ionic surfactant (Tween 20). A part of an anionic surfactant can be incorporated into a PFu structure like an oxidant anion and can act as co-dopant.     

Synthesis,physical properties,and application of aminated poly(glycidyl methacrylate)/zeolite composite

Poly(glycidyl methacrylate)/zeolite (PGMA/Z) composite was prepared by free radical polymerization and it was further modified to contain amino groups on its surface, by reacting to hexamethylenediamine. FTIR, TG, and SEM analyses were performed and investigated its potential as an adsorbent for removal of anionic dyes; namely, Reactive Red 120 (RR120) and Reactive Blue 4 (RB4). The effect of operational parameters was investigated. Maximum RR120 and RB4 adsorption capacities of composite were calculated as 136.5 and 189.8 mg g⁻¹, respectively. Isotherm, kinetic, and thermodynamic studies were also performed. It was found that the adsorption process might be heterogeneous by nature, and adsorption kinetics of reactive dyes followed the pseudo‐second order. The thermodynamic calculations showed that adsorption process was spontaneous and exothermic. POLYM. COMPOS., 37:2313–2322, 2016. © 2015 Society of Plastics Engineers     

Applicability of modelling tools in watershed management for controlling diffuse pollution.

Diffuse pollution is hard to analyze, control and manage by its nature. Watershed models and Geographical Information Systems (GIS) are recently developed tools that aid analysis of diffuse sources of pollution. However, their applications are not always easy and straightforward. Turkey is a typical example of a mountainous country rich in rivers and streams. Due to the complex geomorphology, land-use and agricultural practices in most of the watersheds in Turkey, modelling, analyzing and managing diffuse pollution has been a challenge. The complex watershed structure forces the modellers to work with spatially high resolution data. Apart from the data, the models themselves may also cause operational problems. These issues and their probable solutions form the basis of the discussions in this paper. It acts as a guideline for modelling and analyzing diffuse pollution by emphasizing the referred problems and difficulties. Design of an Information Technology-based system tool for watershed and/or water quality modelling, which would be suitable for countries having watersheds with similar structure and problems to those of Turkey, is also outlined.     

Exergoeconomic (Thermoeconomic) Analysis and Performance Assessment of a Gas Engine–Driven Heat Pump Drying System Based on Experimental Data

Exergoeconomic analysis has been used as a powerful tool to study and optimize various types of energy-related systems. In this study, we use the specific exergy cost (SPECO) method to calculate exergy-related parameters and display cost flows for all streams and components in a gas engine–driven heat pump drying system based on the experimental data. We analyze and evaluate the performance of the drying system components and the drying process for three different medicinal and aromatic plants from an exergoeconomic point of view. We also investigate the effect of varying dead (reference) state temperatures on exergoeconomic performance parameters for the drying system components and drying process. Although the condenser and drying chamber of the gas engine–driven heat pump dryer were significantly affected by the ambient temperature, the gas engine was slightly influenced by the ambient temperature. At low ambient temperatures, the exergy rates increased and the most effective performance obtained from this dryer was at 0°C. The performance of the drying process also increased at low ambient temperatures. This study demonstrated that exergoeconomic analysis can provide more information than exergy analysis, and the results obtained from the exergoeconomic analysis provided cost-based information, suggesting potential locations for drying system improvement.     

Effects of surfactants on the characteristics and biosensing properties of polyaniline

To investigate the effects of surfactants on the properties of polyaniline (PANI), a series of PANIs was synthesized in the presence of surfactants by chemical polymerization of aniline in an acidic medium, using (NH₄)₂S₂O₈ as oxidant. Three types of surfactant were used: (i) non‐ionic poly(ethylene oxide) (20) sorbitan monolaurate (Tween 20) and poly(ethylene oxide) (20) sorbitan monopalmitate (Tween 40); (ii) cationic (1‐tetradecyl)trimethylammonium bromide; and (iii) anionic sodium 1‐dodecanesulfonate and sodium 1‐pentanesulfonate. The structural, morphological and thermal properties of the various samples were characterized using Fourier transform infrared and UV‐visible spectroscopy, scanning electron microscopy and thermogravimetric analysis. Calorimetry was used to compare enthalpy changes during polymerization. The electrochemical and glucose biosensor properties of the PANIs were investigated using cyclic voltammetry and amperometric measurements. PANI‐Tween 20 and PANI‐Tween 40 were found to be good for immobilization of glucose oxidase enzymes and potential candidates for use in glucose biosensing. Copyright © 2010 Society of Chemical Industry     

Computing Cyclomatic Complexity with Cubic Flowgraphs

Two new methods for the computation of cyclomatic complexity especially for decomposable representations are introduced. Building software by integration is a developing paradigm, especially enabled by the emerging component technologies. Decomposition of the design for a top-down approach is a prerequisite for this paradigm. Cubic flowgraphs are instrumental in providing formalisms for decomposition and integration. Cyclomatic complexity analysis of a design representation that is decomposable is the goal of this research. In addition to introducing cyclomatic complexity computation using cubic flowgraphs, preservation of cyclomatic complexity in the decomposition of the cubic flowgraph is also presented.