Comparative study of the phenolics,antioxidant and metagenomic composition of novel soy whey-based beverages produced using three different water kefir microbiota

Water kefir microbiota was used to develop novel soy whey-based beverages that have antioxidant activity. In the present study, comparative phenolics, antioxidant and metagenomic composition of the soy whey beverages fermented using three different water kefir microbiota, named WKFS-A, WKFS-B and WKFS-C were investigated. WKFS-B beverage had the highest concentrations of isoflavone aglycones (208.73 ± 2.78 mg L⁻¹) and phenolic acids (132.33 ± 3.41 mg L⁻¹) compared with WKFS-A (193.88 ± 1.15 mg L⁻¹) and (91.73 ± 2.34 mg L⁻¹) and WKFS-C (160.63 ± 1.76 mg L⁻¹) and (97.13 ± 2.63 mg L⁻¹), respectively. The WKFS-B also showed higher DPPH and ABTS radical scavenging activity and ferric reducing antioxidant power compared with WKFS-A and WKFS-C beverages. Microbial species diversity index analysis showed that a higher concentration of isoflavone aglycones, phenolic acids and increased antioxidant activity in the WKFS-B beverage correlates with the higher relative abundance of Lactobacillus genus. This study thus revealed that Lactobacillus dominated water kefir microbiota produces soy whey beverages with high phenolic acids, isoflavone aglycones and antioxidant activity.     

EETP-MAC: energy efficient traffic prioritization for medium access control in wireless body area networks

Wireless body area network (WBAN) has witnessed significant attentions in the healthcare domain using biomedical sensor-based monitoring of heterogeneous nature of vital signs of a patient’s body. The design of frequency band, MAC superframe structure, and slots allocation to the heterogeneous nature of the patient’s packets have become the challenging problems in WBAN due to the diverse QoS requirements. In this context, this paper proposes an Energy Efficient Traffic Prioritization for Medium Access Control (EETP-MAC) protocol, which provides sufficient slots with higher bandwidth and guard bands to avoid channels interference causing longer delay. Specifically, the design of EETP-MAC is broadly divided in to four folds. Firstly, patient data traffic prioritization is presented with broad categorization including Non-Constrained Data (NCD), Delay-Constrained Data (DCD), Reliability-Constrained Data (RCD) and Critical Data (CD). Secondly, a modified superframe structure design is proposed for effectively handling the traffic prioritization. Thirdly, threshold based slot allocation technique is developed to reduce contention by effectively quantifying criticality on patient data. Forth, an energy efficient frame design is presented focusing on beacon interval, superframe duration, and packet size and inactive period. Simulations are performed to comparatively evaluate the performance of the proposed EETP-MAC with the state-of-the-art MAC protocols. The comparative evaluation attests the benefit of EETP-MAC in terms of efficient slot allocation resulting in lower delay and energy consumption.

     

Platinum‐promoted fibrous silica Y zeolite with enhanced mass transfer as a highly selective catalyst for n‐dodecane hydroisomerization

A fibrous silica zeolite Y (HY@KCC‐1) catalyst with a high surface area of 568 m²/g and unique core‐shell morphology was successfully synthesized via a modified KCC‐1 synthesis method. Characterization of the catalysts was achieved with X‐ray powder diffraction (XRD), field emission scanning microscope (FESEM), N₂ adsorption/desorption, and 2,6‐dimethylpyridine adsorbed Fourier‐transform infrared spectroscopy (FTIR). The Pt/HY@KCC‐1 has displayed complete n‐dodecane conversion coupled with an incredibly enhanced isomer yield of 72% at 350°C, nearly two‐fold higher than that of unmodified Pt/HY catalyst. Remarkably, Pt/HY@KCC‐1 had an internal effectiveness factor (η) of unity and negligible internal diffusion limitation, thus suggesting its potential application in hydroisomerization of higher hydrocarbons for enhancing fuel properties.     

Geothermal and solar energy–based multigeneration system for a district

In this study, parabolic trough collector with an integrated source of geothermal water is used with regenerative Rankine cycle with an open feedwater heater, an electrolyzer, and an absorption cooling system. The absorption fluids used in the solar collectors were Al₂O₃‐ and Fe₂O₃‐based nanofluids. Detailed energetic and exergetic analyses are done for the whole system including all the components. A comparative analysis of both the used working fluids is done and plotted against their different results. The parameters that are varied to change the output of the system are ambient temperature, solar irradiance, the percentage of nanofluids, the mass flow rate of the geothermal well, the temperature gradient of the geothermal well that had an effect on the net power produced, and the outlet temperature of the solar collector overall energetic and exergetic efficiencies. Other useful outputs by this domestic integrated multigeneration system are the heating of domestic water, space heating (maintaining the temperature at 40°C‐50°C), and desalination of seawater (flash distillation). The hydrogen production rate for both the fluids diverges with each other, both producing average from 0.00490 to 0.0567 g/s.     

Low‐cost dye‐sensitized solar cells with ball‐milled tellurium‐doped graphene as counter electrodes and a natural sensitizer dye

This paper presents a facile and economic development of dye‐sensitized solar cells using a nonprecious counter electrode made from ball‐milled tellurium‐doped graphene (Te‐Gr) and a natural sensitizer extracted from Calotropis gigantea leaves. The prepared materials were characterized using various techniques, such as Raman spectroscopy, X‐ray diffraction (XRD), atomic force microscopy (AFM), impedance spectroscopy, and scanning electron microscopy with built‐in energy‐dispersive X‐ray spectroscopy (SEM with EDS). The electrochemical activity of the produced counter electrodes and the impedance of the fabricated cells were examined and discussed to devise plans for future enhancement of cell performance. A clear pattern of improvement was found when using cost‐effective Te‐Gr relative to the costly platinum counter electrodes, especially when compared with cells employing another natural sensitizer. The results show approximately 51% enhancement over chlorophyll‐based cells made from spinach, where the added advantage in our approach is the utilization of an abundant plant extract with little nutritional appeal.     

Maximization of heat transfer density from a vertical array of flat tubes in cross flow under fixed pressure drop using constructal design

The density of heat transfer rate from a vertical array of flat tubes in cross flow is maximized under fixed pressure drop using constructal design. With the constructal design, the tube arrangement is found such that the heat currents from the tubes to the coolant flow easily. The constraint in the present constructal design is the volume where the tubes are arranged inside it. The two degrees of freedom available inside the volume are the tube‐to‐tube spacing and the length of the flat part of the tubes (tube flatness). The tubes are heated with constant surface temperature. The equations of continuity, momentums, and energy for steady, two‐dimensional, and laminar forced convection are solved by means of a finite‐volume method. The ranges of the present study are Bejan number (dimensionless pressure drop) (10³ ≤ Be ≤ 10⁵) and tube flatness (dimensionless length of the tube flat part) (0 ≤ F ≤ 0.8). The coolant used is air with Prandtl number (Pr = 0.72). The results reveal that the maximum heat transfer density decreases when the tube flatness decreases at constant Bejan number. At constant tube flatness, the heat transfer density increases as the dimensionless pressure drop (Bejan number) increases. Also, the optimal tube‐to‐tube spacing is constant, irrespective of the tube flatness at constant Bejan number.     

An iterative code to investigate heat pump performance improvement by exhaust gases heat recovery

The race between the development of technologies and energy demand has drawn the guidelines of energy strategies for the next two decades. Indeed, the governmental organizations as well as the private sectors are spending huge effort to come up with new adequate strategies that allow to decrease energy consumption. Having said that, heat pump becomes an essential system in our daily life not only in residential building but also in hospital, industrial and touristic building. Nonetheless, (HP)s have very high energy consumption rate. Thus, and to be in line with the new trends in energy strategies, it is convenient to find new methods to enhance the performance of heat pump in order to reduce energy consumption. In this frame, the present paper suggests an approach to enhance the performance the heat pumps using the heat recovery from generators. For this purpose, an in-house code is developed allowing to simulate two new proposed systems (condenser upstream exhaust gases heat recovery system (CU-EGHRS) and condenser downstream exhaust gases heat recovery system (CD-EGHRS). It has been shown that the increase in the performance of the heat pump depends on the capacity of the generator. Also, the CD-EGHRS is shown to be the best. For instance, in the case of a 15 kVA generator, the enhancement could reach 42% for the CD-EGHRS. This enhancement increases to 5640% in the case of a 180 kVA generator.     

Potent Antidiabetic Activity and Metabolite Profiling of Melicope Lunu‐ankenda Leaves

Diabetes mellitus is normally characterized by chronic hyperglycemia associated with disturbances in the fat, carbohydrate, and protein metabolism. There is an increasing trend of using natural products instead of synthetic agents as alternative therapy for disorders due to their fewer side effects. In this study, antidiabetic and antioxidant activities of different Melicope lunu‐ankenda (ML) ethanolic extracts were evaluated using inhibition of α‐glucosidase and 2,2‐diphenyl‐l‐picrylhydrazyl (DPPH) radicals scavenging activity, respectively; whereas, proton nuclear magnetic resonance (¹H NMR) and ultra‐high performance liquid chromatography‐tandem mass spectrometric (UHPLC‐MS/MS) techniques were used for metabolite profiling of ML leaf extracts at different concentrations of ethanol and water. Sixty percent of ethanolic ML extract showed highest inhibitory effect against α‐glucosidase enzyme (IC₅₀ of 37 μg/mL) and DPPH scavenging activity (IC₅₀ of 48 μg/mL). Antidiabetic effect of ML extracts was also evaluated in vivo and it was found that the high doses (400 mg/Kg BW) of ML extract exhibited high suppression in fasting blood glucose level by 62.75%. The metabolites responsible for variation among ML samples with variable ethanolic levels have been evaluated successfully using ¹H‐NMR–based metabolomics. The principal component analysis (PCA) and partial least squares(PLS) analysis scores depicted clear and distinct separations into 4 clusters representing the 4 ethanolic concentrations by PC1 and PC2, with an eigenvalue of 69.9%. Various ¹H‐NMR chemical shifts related to the metabolites responsible for sample difference were also ascribed. The main bioactive compounds identified attributing toward the separation included: isorhamnetin, skimmianine, scopoletin, and melicarpinone. Hence, ML may be used as promising medicinal plant for the development of new functional foods, new generation antidiabetic drugs, as a single entity phytomedicine or in combinational therapy.